PROCON 112A060F11CA 112A060F11CA 250 Rotary Vane Pump, Clamp-On, 3/8 Inch NPT, 60 GPH, Brass

Procon 112A060F11CA rotary vane pump is used in beverage dispensing systems, soda fountains and coffee machines to handle liquids efficiently and maintain a consistent flow rate. This pump can handle a wide range of viscosities and is designed for continuous operation, making them reliable for commercial settings.

Working Mechanism:

• The central rotor with vanes in this pump is housed within a casing and moves eccentrically.
• During rotation, the vanes extend outward, creating a seal.
• By this vane movement, the pump then draws fluid or gas into a sealed chamber.
• Consequently, the sealed chamber's volume decreases, compressing the entrapped fluid or gas.
• Then the compressed fluid or gas is expelled through the outlet port of the pump.
• The rotor then maintains continuous rotation, sustaining the process of suction, compression and discharge.

Features:

• It features brass construction for increased durability and resistance to corrosion.
• This pump has a built-in relief valve, providing safety and protection from excessive pressure.
• It comes with a bypass system for smooth operation and controlled flow.
• This pump offers a 0.118-inch double flat drive, facilitating efficient power transmission.
• It further features an NPT inlet of 3/8-18 inches for compatibility with standard pipe fittings.

Frequently Asked Questions:

Q. How to clean and maintain this pump?

A.

• Turn off the pump and disconnect it from the power source.
• Rinse the pump's exterior with water to remove dirt and debris.
• Disassemble the pump following the manufacturer's instructions.
• Clean the internal components using a mild detergent and water solution, using a soft brush or cloth.
• Rinse all parts with clean water to remove the cleaning solution.
• Allow all components to air dry completely.
• Lubricate any necessary parts according to the manufacturer's guidelines.
• Inspect for signs of wear or damage and replace any worn-out or damaged parts.
• Reassemble the pump following the manufacturer's instructions.
• Test the pump to ensure that it functions properly after cleaning and maintenance.

Q. What is the maximum operating pressure of this pump?

A. This pump has a maximum operating pressure of 150 psi.

Q. What factors should I consider while choosing a rotary vane pump?

A.

• Select a pump with an appropriate flow rate to meet your application's requirements.
• Ensure that the pump's maximum operating pressure matches the pressure needed for your process.
• Check if the pump is compatible with the type of fluid you will be handling.
• Consider the viscosity range of the pump to ensure that it can handle your liquid's consistency.
• Look for durable materials suitable for your application, such as stainless steel or brass.
• Choose a pump that aligns with the available power source and voltage.
• Consider the pump's dimensions and available space for installation.
• Check the pump's noise level to ensure it meets your environment's requirements.
• Assess ease of maintenance and availability of spare parts.
• Compare prices and consider the pump's long-term cost-effectiveness.