PROCON 102A140F11PA 102A140F11PA 250 Rotary Vane Pump, Clamp-On, 3/8 Inch NPT, 140 GPH, Brass

Procon 102A140F11PA rotary vane pump is used in beverage dispensing systems, espresso machines, water purification systems and medical equipment. They are ideal for smooth and efficient pumping in precision-driven tasks.

Working Mechanism:

• This pump features a casing that houses a central rotor with vanes, which move eccentrically.
• As the rotor rotates, the vanes move outward, creating a seal.
• By the rotation of the vanes, the pump draws fluid or gas into a sealed chamber.
• As a result, the sealed chamber's volume decreases, compressing the trapped fluid or gas.
• Through the outlet port, the pump expels the compressed fluid or gas.
• The rotor continues to rotate continuously, sustaining the process of suction, compression and discharge.

Features:

• It has brass construction for improved durability and resistance to corrosion.
• This pump features a built-in relief valve to regulate pressure and prevent overloading.
• It comes with a by-pass system, allowing to recirculate fluid and prevent damage during periods of low demand.
• This pump has a 0.118-inch double flat drive, ensuring smooth and efficient operation.
• It has a dry suction lift of 3.3 feet, enabling it to draw fluid from a considerable depth without the need for priming.
• This pump offers a flow rate of 140 gph (gallons per hour), making it suitable for various applications.
• It is integrated with an external relief system, providing an additional safety measure to control pressure.
• This pump offers a clamp-on mounting style using a carbonator clamp for easy and secure installation.

Frequently Asked Questions:

Q. How to install this pump?

A.

• Choose a suitable location.
• Secure the pump in place.
• Connect inlet and outlet.
• Make an electrical connection.
• Perform a test run.
• Monitor performance regularly.

Q. How do I clean and maintain this Procon 102A140F11PA rotary vane pump?

A.

• Remove any remaining fluid from the pump by following the manufacturer's guidelines.
• Disassemble the pump carefully, referring to the manufacturer's instructions.
• Clean the pump components using a mild detergent and water solution, ensuring all debris and residue are removed.
• Rinse the components thoroughly with clean water to remove any detergent residue.
• Allow the components to air dry completely before reassembling the pump.
• Reassemble the pump following the manufacturer's guidelines.
• Inspect and replace any worn or damaged parts as needed.
• Lubricate the pump according to the manufacturer's recommendations.
• Reconnect the pump to the power source and test its operation to ensure it is functioning correctly.

Q. What factors should I consider while choosing this pump?

A.

• Ensure the pump can handle the necessary pressure levels.
• Verify if the pump's materials are compatible with the fluids being pumped.
• Check if the pump's dimensions fit your installation space.
• Assess the ease of maintenance and serviceability.
• Ensure the pump is compatible with your available power source.