What maintenance is required for dewatering pumps?

Clean the pump and hoses regularly to eliminate debris, sediment, or blockages that may hinder the pump's effectiveness.Inspect the intake and discharge hoses of the pump for any indications of damage, such as cracks or leaks. Replace any impaired hoses as necessary.Examine the impeller or propeller of the pump for any obstructions or signs of wear. Clean or replace the impeller if required.

Do these sludge submersible dewatering pumps offer motor protection?

Yes, Allegro Safety dewatering pumps have built-in thermal and amperage sensing protectors to prevent motor failure due to overloading or accidental run-dry conditions. This protection adds an extra layer of safety and helps prolong the lifespan of the motor.

What is the maximum liquid temperature permissible in dewatering pumps?

They can withstand liquid temperatures up to 150 degrees F.

Utility/Dewatering Pumps

Filter

Utility / dewatering pumps are used to remove or level the water table from mines, basements and backyards by the method of centrifugation. These pumps feature an impeller which creates a...Read more

LITTLE GIANT PUMPS -

Pony Pumps

Style	Model	Price (inc. VAT)
A	555111	£317.35	RFQ
B	555113	£259.87	RFQ
B	555110	£247.69	RFQ
B	555112	£237.37	RFQ
C	555602	£220.59	RFQ
A	555203	£230.91	RFQ

TSURUMI -

Automatic Submersible Dewatering Pump

Style	Model	Maximum Head	GPM of Water @ 30 Ft. of Head	Amps	Cord Size	GPM of Water @ 10 Ft. of Head	GPM of Water @ 15 Ft. of Head	GPM of Water @ 20 Ft. of Head	GPM of Water @ 25 Ft. of Head	Price (inc. VAT)
A	LB-480A	39.5 ft.	23	6.1	16/3	57	50	44	36	£1,033.41
B	LB-800A	59 ft.	53	9.6	14/3	77	72	67	60	£1,607.33

DAYTON -

Plug In Utility / Dewatering Pumps
Dayton plug-in utility / dewatering pumps are used to transfer moderate amounts of water in areas where electrical outlets are not present. They feature stainless steel / polypropylene construction to resist chemicals & moisture. These pumps drain standing water down to 3/8 inches depth, for dewatering window wells, basements, ponds, stock tanks & rooftops. They are equipped with double ball bearings to bear radial & axial loads in both directions, and are available in cord lengths of 10 & 20 feet.

Style	Model	Housing Material	GPM of Water @ 25 Ft. of Head	Amps	Cord Length	Diameter	GPM of Water @ 10 Ft. of Head	GPM of Water @ 15 Ft. of Head	GPM of Water @ 20 Ft. of Head	Price (inc. VAT)
A	3YU55	Polypropylene	-	2.6 AC	10ft.	6"	23	14.2	5	£172.48
A	3YU54	Polypropylene	-	1.5 AC	10ft.	6"	11	6	-	£135.02
B	1XHV4	Stainless Steel	27	4.7 AC	20ft.	9.125"	64	51	40	£883.41
B	1XHV5	Stainless Steel	53	11.3 AC	20ft.	10.375"	82	69	61	£1,480.23

LITTLE GIANT PUMPS -

Submersible Sump Pumps, Ball Bearings, 20 Feet Cord Length
Little Giant submersible sump pumps are designed for removing standing / accumulated water from a sump basin in the basement or crawl space and transfer water to the sewer line. These units come with stainless steel housing for handling corrosive fluids and semi-open impeller design for handling liquids with solid particles. They are completely submerged underwater and start operating the motor automatically when the sump pit water rises to an emergency level and stops the pump when the water has drained down to normal level. Choose from a wide range of these submersible sump pumps, available in 12 and 14 inch heights.

Style	Model	Impeller Material	GPM of Water @ 30 Ft. of Head	Amps	Diameter	GPM of Water @ 10 Ft. of Head	GPM of Water @ 15 Ft. of Head	GPM of Water @ 20 Ft. of Head	GPM of Water @ 25 Ft. of Head	Price (inc. VAT)
A	620241	Ductile Iron	54	10 AC	7.25"	76	71	68	60	£1,155.93
B	620240	Rubber	22	5 AC	7 5/16"	54	49	42	34	£918.72

TSURUMI -

Submersible Dewatering Pump

Style	Model	Impeller Material	GPM of Water @ 30 Ft. of Head	Amps	Diameter	GPM of Water @ 10 Ft. of Head	GPM of Water @ 15 Ft. of Head	GPM of Water @ 20 Ft. of Head	GPM of Water @ 25 Ft. of Head	Price (inc. VAT)
A	LB-1500	High Chrome	84	26.2	7.375"	108	104	96	90	£3,949.20
B	LB-800	Urethane Rubber	53	9.6	7 9/16"	77	72	67	60	£1,223.47

DAYTON -

Plug In Utility Pumps, Stainless Steel Base
Dayton plug-in utility pumps are used for draining excess rainwater from window wells & stairwells, and removing standing water from yards & flooded basements. These pumps feature a stainless steel base for structural rigidity and 3-conductor SJTOW cords that are resistant to oil & water. They are integrated with dual ball bearings for less rotational friction while running at a maximum speed of 3450 rpm. These dewatering pumps are capable of withstanding liquid temperatures up to 104 degrees F.

Style	Model	Width	GPM of Water @ 5 Ft. of Head	Amps	GPM of Water @ 10 Ft. of Head	GPM of Water @ 15 Ft. of Head	GPM of Water @ 20 Ft. of Head	GPM of Water @ 25 Ft. of Head	GPM of Water @ 30 Ft. of Head	Price (inc. VAT)
A	11C685	5.62"	21	3.2	15	8	-	-	-	£312.36
B	11C686	6.5"	76	7.5	59	45	29	16	4	£310.74
B	11C687	6.5"	83	11.4	64	49	31	17	5	£359.46

TSURUMI -

Construction Site/Residential Dewatering Pump

Style	Model	Height	GPM of Water @ 20 Ft. of Head	Amps	Cord Length	Cord Size	Diameter	GPM of Water @ 10 Ft. of Head	GPM of Water @ 15 Ft. of Head	Price (inc. VAT)
A	LB-480	11.25"	44	6.1	32ft.	16/3	7.375"	57	50	£721.83
B	LSR2.4S-60	11.375"	44	6.1	32ft.	16/3	8.25"	57	50	£920.84
C	HS2.4S-62	12 15/16"	35	5.4 AC	20ft.	16/3	10 1/16"	46	40	£592.12
D	HS3.75S-62	15.25"	55	9.6	32ft.	14/3	12.437"	60	59	£1,151.53
E	HSZ2.4S-62	15.125"	35	5.4 AC	20ft.	16/3	13.5"	46	40	£696.40
F	HSD2.55S-62	15.375"	40	7.5	32ft.	16/3	9.75"	52	47	£1,304.71
G	HSZ3.75S-61	17.5"	55	9.6	32ft.	14/3	13.5"	60	59	£1,197.65
H	NK2-22	24.5"	114	13	32ft.	14/3	9.437"	126	120	£4,501.21
I	NK2-22L	26.5"	180	13	32ft.	14/3	9.25"	200	188	£5,085.91

ZOELLER -

Utility Pumps

Style	Model	Shaft Material	Housing Material	Amps	GPM of Water @ 15 Ft. of Head	GPM of Water @ 20 Ft. of Head	GPM of Water @ 25 Ft. of Head	GPM of Water @ 5 Ft. of Head	Height	Price (inc. VAT)
A	314-0002	Carbon Ceramic	Cast iron	8.0	22	21.5	21	23	8"	£703.47
B	46-0005	Stainless Steel	Plastic	6 AC	36	25	5	55	14.5"	£595.72

ALLEGRO SAFETY -

Hex Bolts
Allegro hex bolts are suitable for fastening components in sludge dewatering pumps used for wastewater transfer & dewatering applications. Their 304 stainless steel construction prevents highly abrasive environments from damaging / wearing the fastener. Selected models having washers are also available.

Style	Model	Item	Price (inc. VAT)
A	9404-42	Hex Bolt	£3.80	RFQ
A	9404-40	Hex Bolt	£17.75	RFQ
A	9404-27	Hex Bolt with Washer	£11.41	RFQ

LITTLE GIANT PUMPS -

Utility Pumps

Style	Model	Price (inc. VAT)
A	505715	£363.65
B	505723	£269.62
C	505714	£337.21
C	505712	£257.89

DAYTON -

Utility Pumps

Style	Model	GPM of Water @ 5 Ft. of Head	Motor Type	Body Material	Height	HP	Max. Liquid Temp.	Motor Enclosure	GPM of Water @ 10 Ft. of Head	Price (inc. VAT)
A	4LA43	-	-	-	-	-	-	-	-	£2,039.85
A	4LA45	-	-	-	-	-	-	-	-	£1,461.73
B	5UXL8	3.72	DC	Nickel-Plated Brass	4.187"	1/10	140 F	Open	3.32	£163.78
B	5UXN0	3.72	DC	Stainless Steel	4.187"	1/10	140 F	Open	3.32	£215.20
C	2VAN7	30	PSC	-	11.75"	1/4	104 Degrees F	TEFC	22	£184.66

LITTLE GIANT PUMPS -

Dewatering/Utility Pumps

Style	Model	Width	Item	Amps	GPM of Water @ 10 Ft. of Head	GPM of Water @ 15 Ft. of Head	GPM of Water @ 20 Ft. of Head	GPM of Water @ 5 Ft. of Head	Height	Price (inc. VAT)
A	505300	-	Pump	-	1000	-	520	1100	-	£231.23
B	505400	4 5/16"	Submersible Utility Pump	5 AC	16.7	14	8.7	18.3	8.5"	£218.00
C	505176	4 5/16"	Utility Pump	5 AC	17	14	9	18	7.75"	£136.33
D	505350	4 19/64"	Pump	5	1000	840	8.7	1100	7.75"	£257.71

ALLEGRO SAFETY -

Dewatering Pumps

Style	Model	Price (inc. VAT)
A	9404-02	£826.32
B	9404-04	£700.64

LITTLE GIANT PUMPS -

Utility Pump

Style	Model	Price (inc. VAT)
A	556501	£292.82	RFQ
B	556001	£96.75	RFQ

ALLEGRO SAFETY -

Impellers
Allegro impellers are replacements for worn out impellers in sludge, low water & dewatering pumps, used for underground mining & waste fluid removal / transfer applications. They have one piece design for minimising wear over prolonged & repeated usage.

Style	Model	Price (inc. VAT)
A	9404-48	£209.70	RFQ
A	9404-11	£324.33	RFQ
A	9404-21	£225.46	RFQ

RED LION -

Multipurpose Pump

Model	Item	Price (inc. VAT)
14942731	CT8VPT	£121.87

TSURUMI -

Engine Driven Utility Pump, 11 Hp, 4 Inch Mnpt, 337 Cc Engine Size, Centrifugal, Semi-Open

Model	Item	Price (inc. VAT)
EPT3-100HA	CU7CWP	£3,496.25

SANDPIPER -

Residential Dewatering Pump, Spa1 1/2E3

Model	Item	Price (inc. VAT)
SPA1 1/2E3.	CT9TEP	£2,304.00

MILWAUKEE -

Water Pump, 12 V, 9 gpm, 15 ft of head, Bare Tool, 3/4 Inch Size GHeight Male

Model	Item	Price (inc. VAT)
2579-20	CT3QBB	£247.76

ALLEGRO SAFETY -

Stud Bolt

Model	Item	Price (inc. VAT)
9404-19	AG8FFF	£13.94	See Details

ALLEGRO SAFETY -

Suction Cover

Model	Item	Price (inc. VAT)
9404-31	AG8FFP	£164.79	See Details

12...4 5

Utility/Dewatering Pumps

Dewatering pumps are used to remove or draw groundwater from mines, basement and backyard, as well as reduce flooding by the method of centrifugation and level the water table. Raptor Supplies offers a wide range of these utility / dewatering pumps from brands like Allegro, Dayton, Little Giant Pumps, Tsurumi and Rule. These pumps feature an impeller which creates a vortex to suck the air out of the hose and, as a result, forces the water to rise to the pump with the help of atmospheric pressure. These horizontally installed pumps use electric motors with a maximum 3 HP power rating and come with a mechanical seal to prevent water ingress. These pumps are available in cord lengths ranging from 8 to 50 inches on Raptor Supplies.

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Utility/Dewatering Pumps

Pony Pumps

Automatic Submersible Dewatering Pump

Submersible Dewatering Pump

Construction Site/Residential Dewatering Pump

Utility Pumps

Utility Pumps

Utility Pumps

Dewatering/Utility Pumps

Dewatering Pumps

Utility Pump

Impellers
Allegro impellers are replacements for worn out impellers in sludge, low water & dewatering pumps, used for underground mining & waste fluid removal / transfer applications. They have one piece design for minimising wear over prolonged & repeated usage.

Multipurpose Pump

Engine Driven Utility Pump, 11 Hp, 4 Inch Mnpt, 337 Cc Engine Size, Centrifugal, Semi-Open

Residential Dewatering Pump, Spa1 1/2E3

Water Pump, 12 V, 9 gpm, 15 ft of head, Bare Tool, 3/4 Inch Size GHeight Male

Stud Bolt

Suction Cover

Utility/Dewatering Pumps

Frequently Asked Questions

We are here to help!

Looking for a part not listed here?

Explore More

Select your cookie preferences

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Utility/Dewatering Pumps

Impellers Allegro impellers are replacements for worn out impellers in sludge, low water & dewatering pumps, used for underground mining & waste fluid removal / transfer applications. They have one piece design for minimising wear over prolonged & repeated usage.

Multipurpose Pump

Engine Driven Utility Pump, 11 Hp, 4 Inch Mnpt, 337 Cc Engine Size, Centrifugal, Semi-Open

Residential Dewatering Pump, Spa1 1/2E3

Water Pump, 12 V, 9 gpm, 15 ft of head, Bare Tool, 3/4 Inch Size GHeight Male

Stud Bolt

Suction Cover

Utility/Dewatering Pumps

Frequently Asked Questions

What maintenance is required for dewatering pumps?

Do these sludge submersible dewatering pumps offer motor protection?

In what cord lengths are these dewatering pumps available on Raptor Supplies?

What is the maximum liquid temperature permissible in dewatering pumps?

We are here to help!

Looking for a part not listed here?

Explore More

Impellers
Allegro impellers are replacements for worn out impellers in sludge, low water & dewatering pumps, used for underground mining & waste fluid removal / transfer applications. They have one piece design for minimising wear over prolonged & repeated usage.