THOMSON D12-05B5-08

Thomson D12-05B5-08 linear actuator is used in marine, mobile-off-highway, health & fitness, ventilation and agricultural applications to lower, push, pull, lift, position or rotate a load.

Working Mechanism:

• Switch off the actuator before starting to work on / near it and its electrical controls.
• The clutch slips when the load surpasses the actuator's rating to prevent any movement of the load.
• The clutch is, therefore factory set depending on the load rating.

Features:

• This linear actuator has a motor with a thermal switch to prevent overheating.
• It has a robust, reliable and strong design to withstand extreme operating conditions.
• This Electrak 10 Series unit is equipped with a holding brake to prevent the drive system from moving once it reaches a near-stop position.
• It features a stainless steel extension tube that resists corrosion on exposed surfaces.
• This actuator offers a ball screw drive system to prevent damage during operation.
• It is integrated with an overload clutch to protect from mid and end-of-stroke.

Standards and Approvals:

• CE
• IP66
• RoHS

Frequently Asked Questions:

Q. What is the operating temperature range of Thomson D12-05B5-08 linear actuator?

A. This actuator can be operated at temperatures ranging from -15 to 150 degrees F.

Q. What is the voltage rating of this Thomson D12-05B5-08 actuator?

A.12VDC

Q. How to mount Thomson D12-05B5-08 actuator?

A.

• Thomson D12-05B5-08 actuator has ends that are prevented from rotating and mounted using parallel pins to support equally on both ends.
• This actuator is not mounted off of a cover (outer) tube.

Q. What is the maximum travel rate in this actuator?

A. 1.4 inch/second at full load.