SPEEDAIRE 7D704 Filter/regulator/lubricator 1/2 Inch Npt 60 Cfm 32250 Psi

Speedaire 7D704 filter / regulator / lubricator efficiently removes particles & moisture and lubricates the equipment while controlling fluid flow. This device benefits agricultural, plumbing, food and chemical applications.

Working Mechanism:

• Speedaire 7D704 regulator controls and maintains steady air pressure in pneumatic systems.
• It works by adjusting an internal valve based on the desired pressure level set by the user.
• This Speedaire regulator monitors downstream pressure and opens or closes the valve as needed to keep the pressure within the specified range, ensuring consistent performance for pneumatic tools and equipment.

Features:

• Speedaire 7D704 regulator / filter / lubricator has a MicroMist lubricator to provide the correct amount of lubrication to the pneumatic tools.
• This regulator has a manual drain valve that removes the collected water from the filter bowl.
• Its modular connector allows easy removal and swap out.
• This Speedaire pneumatic regulator features positive and accurate pressure regulation over a wide range of pipe sizes and is capable of handling flow rates up to 60 CFM.
• It has a metal bowl with sight glass for withstanding pressures upto 250 psi.

Compatible Accessories:

• Speedaire 4ZK38 Adapter Pipe: These pipes are intended to connect two different pipes and ports in pneaumatic tools.
• Speedaire 2YNN4 Muffler: These nuts have a strong single-thread design for quick and secure installation.

Frequently Asked Questions:

Q. What is the maximum working temperature of this FLR unit?

A. 175 degrees Fahrenheit.

Q. What is the pressure adjustment range of this Speedaire 7D704 filter?

A. 5 to 150 psi.

Q. What is the filter size of this FLR unit?

A. 5 microns.

Q. What factors should I consider while choosing a fuse block?

A.

• Voltage and current ratings.
• Number of circuits needed.
• Fuse type compatibility.
• Mounting and enclosure type.
• Wire size compatibility.
• Fuse access and replacement ease.
• Safety features.

Q. What safety precautions should I follow when working with pneumatic regulators?

A. When working with regulators and pneumatic systems, always wear appropriate safety gear, follow recommended operating pressures, and be cautious of sudden pressure releases. Ensure that the system is depressurised before performing any maintenance or adjustments on the regulator.

Q. What happens if the downstream pressure exceeds the setpoint on the regulator?

A. If the downstream pressure surpasses the setpoint, the regulator will reduce the flow of air by partially closing the internal valve. This action helps maintain the pressure within the desired range and prevents over-pressurisation of equipment.

Q. How do I adjust the pressure setting on this Speedaire regulator?

A. To adjust the pressure setting, turn the knob or screw located on the regulator. Turning it clockwise increases the pressure, while turning it counterclockwise decreases it. Be sure to use a pressure gauge to monitor and verify the set pressure.