RIDGID 36518 HB382 Hydraulic Pipe Bender, Tip-Up Wing, 3/8 to 2 Inch Size

RIDGID 36518 hydraulic pipe bender is intended for cold bending of standard gas pipes up to 2 inches in diameter. It is ideal for on-site bending, machine construction & boiler manufacturing applications.

Working Mechanism:

• A conductor powers the coil when using a hydraulic press brake.
• After being turned On, the clamp generates bending force, allowing steel plates to be bent.
• This hydraulic bending machine uses electromagnetic clamping.

Features:

• Provides manual control to move the handle up / down for precise bending.
• Features a long cylinder stroke per pump with a single-circuit hydraulic system and return spring facility for minimal operator fatigue.
• Handy tip-up wing configuration for quick access to the pipe during setup & removal.
• Features durable piston seals & pressure relief valves to prevent premature leaks & over-pressurisation of the hydraulic system, respectively.
• Bending angle indicators to take measurements and reduce starting, stopping & pipe removal work.
• Comes with a set of hydraulic pipe bender parts like support corner, pin fixing, U-bracket & formers for standard gas pipe applications.

Frequently Asked Questions:

Q. What standards should the pipes being used with this bender comply with?

A.

• EN 10255
• ASTM A53 Schedule 40 & 80
• DIN 2440 & 2441
• BS 1387
• GB/3091 (ISO 559)

Q. What safety rules should be kept in mind while using hydraulic pipe benders?

A.

• While bending the pipe, remember to keep your hands away from the die and rollers.
• During maintenance, always use the recommended hydraulic oil.