RIDGID 31410 902 No Hub Soil Pipe Torque Wrench 60 Inch Lb

RIDGID 31410 torque wrench is used to precisely tighten couplings. It is appropriate for manufacturing & assembly applications where consistent torque must be applied to a specific fastener type.

Working Mechanism:

• Adjust the handle and set the torque level.
• To secure the handle, use the tightener on the end.
• Slip it over the socket / nut / bolt and turn it clockwise to tighten.

Features:

• Preset T-shaped handle for eliminating guesswork in No Hub soil pipe installations & allowing use in tight spaces.
• Assures proper coupling tightness for strong, leak-free joints.
• Slip-release design to disengage and stop turning the fastener when the preset torque is reached.

Frequently Asked Questions:

Q. What are the benefits of using RIDGID 31410?

A. This wrench can be programmed to apply a specific torque to a fastener (such as a nut or bolt) so that it doesn't get damaged by over-torquing or loosen over time due to under-torquing. It increases productivity by applying the correct torque value to each fastener consistently.

Q. How do you set a preset torque wrench?

A.

• Slowly apply torque clockwise until the wrench breaks over.
• Remove the end cap to adjust the torque setting.
• Insert the hex key into the internal adjuster and turn clockwise to increase the torque setting.
• Rotate counterclockwise to decrease the setting.