RED DEVIL 05025-X1 Gyroscopic Paint Mixer, Explosion Proof, 110V, 60Hz

Red Devil 05025-X1 5-gallon paint shaker is ideal for thoroughly mixing paint in cans or buckets. Its advanced direct-drive gear system provides efficient power transmission from the gearbox to the rotating arm assembly. It accepts both plastic and metal containers.

Working Mechanism:

• When you open the cabinet door, you'll notice a red ratchet lever and a red-topped clamp.
• To raise the plate, pull the red ratchet level toward you and turn the top of the clamp counter-clockwise.
• Insert a 5-gallon pail under the clamping (top) plate and into the bottom plate's grooves. The plate's grooves keep the pail in place while mixing.
• Turn the handle clockwise to lower the clamping plate. Tighten it by another 1/4 turn once the plate makes contact with the pail.
• Use the bail spring to secure the bail.
• To start the machine, close the door and set the timer.

Features:

• Features a gyroscopic mixing action with a direct-drive gear system for turning buckets / cans in every direction simultaneously for uniformity.
• Gear drive prevents second axis motion slippage.
• Safety interlock interrupts machine operation if the door is open.
• Built-in roller assists with loading and unloading.

Standards and Approvals:

• Explosion-proof motor for use in Class I, Division I, Groups C & D hazardous (classified) locations.

Frequently Asked Questions:

Q. How do you remove a pail?

A.

• Hold the ratchet lever open while turning the crank handle counterclockwise to raise the clamp all the way to the top.
• Unhook the bail spring.
• Take out the pail.
• Grab the pail handle and pull forward, allowing the pail's base to leverage itself off the strike plate near the roller.
• To remove the pail from the machine, pull the handle.

Q. What are the things to keep in mind while cleaning this 5-gallon paint shaker?

A.

• It is critical to keep the machine clean in order for it to operate reliably.
• Spilt water-based / glycol colourants or base paints on machine surfaces can be removed with lukewarm water and a mild detergent.
• Avoid using abrasives to clean its surfaces.