With over 60 years of experience, Proto has been a leading manufacturer of hand tools and accessories for applications in chemical, geothermal, petrochemical, marine, oil & gas, power and refining industries. Headquartered in New Britain, Connecticut, United States, Proto Tools offers a line of products, including a wide range of sockets, wrenches, ratchets, clamps, master sets, punches, chisels and tethered tools. Read More
Proto steel / alloy steel wrenches feature black oxide / satin / chrome finish that provides corrosion resistance and an extra-wide jaw (max 1.5 inches) for a tight fit. They are available in cushion grip, over-moulded rubber, plain grip and steel handle variants.
Proto metric / SAE wrench sets come with 12-point box end wrenches for fine indexing and speed improvement. They comfortably fit into 4, 6 and 12-point fasteners.
Proto box end wrenches come with closed loops at both ends to fit hexagonal or square bolts. These box-end wrench sets have an enclosed head on each end of the handle that provides more contact to the fastener and allows more torque than an open-end wrench since the box end is less likely to slip off the fastener.
Proto chain wrenches and tongs feature a U-shaped opening that contacts a fastener from the top or side; ideal for tightening jam nuts, check nuts or lock nuts. These wrenches further feature an ultra-thin profile that provides better access in close quarters and have a non-reflective black oxide finish.
Proto check nut wrenches provide a firm grip while applying torque to rotate stubborn or worn-out fasteners. They feature a 12-point box end design that guarantees fine indexing to improve the speed and facilitates cinching or breaking bolts in difficult locations.
Equipped with a rounded head to offer more contact with hexagonal fasteners and an opening in the wrench head to allow obstructions to pass through. Feature 6- / 12-point box end design allowing fine indexing for improved speed and access. Sets available with 3 to 10 number of pieces
Widely used Proto hand tools with an anti-slip design for easy application. Available in 6-point and 12-point box ends and satin / chrome / full polish / black oxide finish options
Dial torque wrenches designed for torque measurement in industrial machinery & hydraulic equipment calibration and automotive maintenance & repair operations. All steel / aluminium torque transfer components and high alloy tension drive design
Wide range of bench-mount torque transducers, brackets for transducers, in-line extension transducers, in-line torque transducers and torque tester floor stands to enhance and extend the capabilities of an electronic torque meter
Electronic torque meters suitable for testing and calibrating torque controlled tools and equipment in research & development, machinery tuning and maintenance. Large digital display and compact design for accurate readings & secure storage and transportation, respectively. Available in battery operated and AC / DC adapter power source variants
Electronic torque wrenches designed for fastening nuts and bolts at accurate torque pressures for automotive, industrial machinery and hydraulic equipment calibration. Digital display with visual alerts & audible buzzer for delivering accurate torque output. Available in 0.01, 0.1 and 1 N-m graduation variants
Intended for use with hex nuts made of soft metals (like brass or aluminium) as they do not strip the sides. Available in SAE / Metric dimensions and different sizes
Designed to turn bolts and screws with specialised sockets in the fastener head. Feature a black oxide finish for resistance against corrosion and a molded plastic holder (selected models). Available in ergonomic, fold-up, L-shaped, plain, T-shaped handles for more turning power & a comfortable grip
Used for tightening and loosening hexagonal bolts and other mechanical fasteners. Come with steel / alloy steel blades to resist rust and plain- / cushion-grip handles for fatigue-free performance. Offered in L and T shaped variants
Meet ASME B107.14M specifications to handle a variety of assembly and field jobs using fewer wrenches and minimal manual effort. Feature an audible click indicator to indicate the status of the requisite torque setting. Offer +/-4% CW and +/-6% CCW accuracies
Feature interchangeable heads for a variety of assembly operations. Ideal for applications in metalworking and plumbing industries and are available in box end / open end / square drive heads
Ratcheting head micrometer torque wrenches designed to deliver preset torque output to a mechanical fastener in military and aerospace applications. Can be calibrated using a mechanical load in a horizontal position, followed by a 3-click test at 20, 60, and 100 % of maximum instrument capacity
SAE / Metric wrench sets designed for loosening and tightening bolts, nuts and other fasteners. Feature a compact design to access fasteners from the top, side, and in tight spaces. Available in satin, black oxide and full polish variants
Wrenches with two U-shaped open ends for tightening / loosening nuts and bolts. Available in different head angles and SAE / metric dimensions
Used to turn threaded pipe and pipe fittings for installation or removal in plumbing assembly lines. Featuring a large knurl and power threads to provide fast and positive jaw adjustment and a standard handle length with wide gripping surface to offer increased comfort
Integrated with a box end design on one end of the handle with a gear mechanism for free rotation of the wrench without having to remove the wrench head from the fastener. Suited to fasten or loosen stubborn nuts and bolts. Available in sets including 3 to 22 pieces
High-quality Proto professional tools available in different offset angles for smooth application in tight spaces
Equipped with a 30-degree head that allows access in difficult-to-reach fastener assemblies, satin finish to provide corrosion resistance and a slip-resistant grip for continuous-duty use. Feature a thin pattern for use on jam nuts, check nuts or lock nuts
High-strength steel wrenches with a large striking surface; ideal for use with hammers and sledges to tighten or loosen damaged / stubborn fasteners. Available in 6 pt. and 12 pt. box ends for fine indexing
Equipped with a tapered spike at the handle end for aligning bolt holes when installing automotive components, beams, girders or pipe fittings. Feature a long offset handle for greater leverage and clearance to knuckles and obstructions. Available in overall lengths ranging from 11 to 30 inches
Capable of precisely tightening & loosening large industrial bolts for a gearbox assembly. Feature a single-stage planetary gear system delivering multiplication ratios up to 6:33:1 for transferring the highest torque in the most compact setups
Wide range of torque angle meters, torque wrench software and digital angle adapters ideal for repair & maintenance services. Deliver a maximum torque of 250 ft-lb; offered in 2-9/32, 3-23/64 and 5 inch length options
Suitable for use in hard-to-reach or restricted access areas where a standard wrench or ratchet cannot reach. Feature a full-polish finish to reduce oxidation reactions on the exposed surfaces and an anti-slip open-end design for low-torque applications
Steel-made socket wrenches with an anti-slip design, arched surface and a locking hole. Designed for use in hard-to-reach areas where commonly used 6 pt. and 12 pt. sockets and wrenches do not fit
High quality precision hand ratchets commonly used for loosening and fastening nuts and bolts. Long handle head ratchets feature sealed design preventing debris from entering the ratchets. Offered in pear, round and sealed head styles
Capable of accommodaring heavy fasteners and hold them tightly during use. Utilise heavy-duty magnets made from a rare earth magnet alloy / nylon blend. Socket size stamped on the tool for easy identification and equipped with a side locking hole
Used with power sockets for tightening and loosening fasteners with power wrenches. Capable of delivering more speed and torque than a hand wrench. Feature a forged steel body with the size stamped on the tool for easy identification
Combination of a screwdriver bit and a hex socket featuring alloy steel construction with a polished chrome finish. The set includes socket bars and socket clips and extra long bits to provide additional reach
Have chrome vanadium / heat-treated alloy steel construction for rugged use in metalworking and automotive industries. SAE and metric variants available in different finish options and drive sizes
Different types of flex and wobble socket extensions used to extend the reach of sockets in confined spaces or hard-to-reach areas
Includes a wide range of SAE and Metric Proto socket sets, available in both deep and flex socket point styles, for applications in automotive manufacturing, steel fabrication and fleet maintenance
Includes socket bars, rails, clips and drivers; hinge handles; spinner ratchets; drive plugs; socket bit holders and universal joints commonly used with sockets, wrenches, screwdrivers and other Proto tools. Offered in different drive sizes and finish options
Includes sockets with a TorquePlus internal design, making them ideal for applications with damaged fasteners. Available in different SAE and metric sizes
Insert, Torx and power bit sets comprising bit sockets and socket holders; can be used with an impact or any standard drill. Number of pieces in the sets range from 7 to 38
Ideal for use with Hex, Phillips, Slotted, Torx, Tri-Wing and Wing Nut type screws. Feature an extra-long handle for improved access in confined or restricted areas. Come equipped with a ratcheting magnetic bit driver and magnetic T-handle bit driver
Integrated with a precision head for securing hex nuts and hollow shafts for accommodating long bolts. Feature accurately formed, heat-treated hex openings with color-coded handles for easy identification during use
Equipped with a socket attached to a shaft and a cylindrical handle for tightening and loosening mechanical fasteners. Similar in appearance and utility with a screwdriver. Feature color-coded handles for easy identification
Double-end screw starters to install or remove standard and Phillips screws in hard-to-reach areas. Feature a pocket clip and a knurled aluminium handle for maximum user comfort over prolonged hours
Bit extensions and hex bits for fastening metal and self-tapping screws. Square bit extensions feature forged steel construction for less surface porosity and high tensile strength. Available in body diameters of 1/4 and 3/8 inches
Suitable for driving lag bolts and screws, as well as loosening frozen nuts either with a cordless drill or manually. Feature steel / tool steel / S2 steel construction for strong torsion and resistance against impacts or vibrations. Offered in 1, 1.875 and 6 inch length options
Widely used by metalworkers and carpenters for installing & removing screws. Feature a quad-lobe handle design with 360-degree texture for secured grip. Available in 2, 4, 6, 7, 8 and 9 pieces
Includes screwdrivers with round / hex / square shanks made of alloy steel for applications in different maintenance and assembly operations
Proto Tools catalogue includes a wide range of sockets, wrenches, ratchets, screwdrivers, hex keys, pliers, snips, clamps, master sets, punches, chisels and tethered tools. Proto torque wrenches, also known as digital torque wrenches, provide a precise torque reading by measuring turning force electronically to avoid over tightening of fasteners. These wrenches are commonly used to apply consistent torque on assembled products for safety and quality control applications. They feature a digital display with visual alerts & an audible buzzer for delivering accurate torque output. Proto socket sets feature TorquePlus configuration with radius-corner design for shifting the stresses away from the corners and uniformly distributing over a large surface area. The internal design of these sockets further reduces rounding of the edges and offers more flexibility to turn worn out or rusted fasteners. Choose from a wide range of these quality wrenches & other company products, such as socket bits, hand-held punches & chisels on Raptor Supplies.
Proto Tools torque wrenches (manufacturer's part numbers) generally cross individual reference to the equivalent AMPCO Metal model numbers. So, if you are looking for a competitor torque wrench that is either out of stock or obsolete, chances are Raptor Supplies has the equivalent Proto torque wrenches available. Customers can also cross-reference most of these couplings using the last five digits of the model numbers.
These Proto torque wrenches and steel crowfoot wrenches are small in size and require compact packaging. Hence, they are delivered in packs consisting of several pieces and are suitable for courier shipment and not air freight.
Proto SkyHook tools include dock pocket kits, switch connectors, apron kits, bolt bag kits & saddle kits. Proto tools & storage units provide safe tethering & transfer of tools for various industrial ...Read More
Proto SkyDock attachments include various wrist straps and tool storage attachments. The SkyDock attachments are used in conjunction with SkyHook pocket kits for securely anchoring to the belt, wrist,...Read More
Proto Compo-Cast combo face hammers feature urethane construction for preventing the hammer from damaging the workpiece. This construction ensures that the hammer retains its shape even after striking...Read More
Proto Clik-Stop adjustable wrenches have a locking design for securely holding their moving jaws in place when in operation. Proto wrenches have a square jaw opening for providing tight fit and streng...Read More
Proto Facom safety gloves protect the user against sharp objects and blow in various industrial applications. These safety gloves have silicon leather to provide complete mechanical protection near ma...Read More
Proto Stanley SortMaster organisers are ideal to store small parts & tools for transportation. Proto tool sets feature lid structure for preventing the movement of small parts & tools from one compart...Read More
Proto Facom insulated ratchets are ideal for fastening nuts and bolts for applications prone to electrical leakage. These Proto professional tools have two colour warning handle insulation that changes colour to yellow if the insulation integrity is compromised during the operation. They have a spring ball tip for securing the sockets & accessories while fastening.
Proto offers various tools, including storage units, hand sockets, drive tools, impact sockets, wrenches, pliers, clamps, snips, screwdrivers, hex keys and torque wrenches.
Socket wrenches are designed to fasten nuts & bolts. However, these tools are not ideal for tight spaces as they need to be lifted after each fastening cycle. Whereas, ratcheting wrenches have pawls that enable the wrench to spin in one direction while turning the bolt in another.
No, regular sockets should not be used with impact wrenches. These sockets are likely to shatter against the power of impact wrench because of their thin wall design and construction material.
