OETIKER 10100027 Hose Clamp, Band Width 0.335 Inch, Size Range 16.2 mm to 20 mm, Pack Of 100

Oetiker 10100027 hose clamp is used to attach a hose over a fitting by clamping the hose down. This Oetiker 10100027 hose clamp can be used in various industries to secure the transportation of liquids, gases, chemicals and other products.

Working Mechanism:

• First, the hose clamp is connected to the edge of a hose.
• This edge of the hose is then positioned around a selected object.
• This clamp now requires to be tightened, securing the hose in place and ensuring that nothing from inside the hose can escape.
• In general, screw / band hose clamps are not suitable for ultra high-pressure applications but are frequently used in lower-pressure environments. These hose clamps are utilised in different industries, including the agriculture, automotive and marine industries.

Features:

• Oetiker 10100027 clamp is a type of hose clamp formed of a band with one or more unified "ears".
• The ear of this hose clamp is closed using a pincer tool to produce a tight, leak-proof connection at the hose fitting.
• This ear hose clamp is often used in challenging applications where thin-walled hoses, rigid plastics, and hard & soft rubbers are present.
• Oetiker 10100027 hose clamp is manufactured for permanent installation and is not re-usable as it can only be separated by destructive means.

Standards and Approvals:

• ASTM F 2098
• IATF 16949:2016
• ISO 9001:2015

Frequently Asked Questions:

Q. What is the difference between the double ear and single ear clamps?

A. Double ear clamps provide increased clamping force, whereas single ear clamps permit rapid and easy installation & removal.

Q. How to remove an Oetiker 10100027 hose clamp?

A. Users can use tools, like a side / bowl nose cutter, to remove the interlock & peel back the clamps from hoses. It is not recommended to use rotating cutters as they can cause damage to the hose while cutting the clamp.

Q. Can Oetiker clamps be reused after removal?

A. No, we can not reuse the ear clamps once they have been cut & removed as their 'ear' gets damaged. However, selected Oetiker clamps like low profile, universal & screw clamps can be reused after removal from hoses.

Q. How do you measure ear clamps?

A.
• Mount the hose on the pipe or fitting (which expands the hose).
• Calculate the OD (outside diameter) of the hose.
• Choose a clamp which can accommodate that given diameter in the middle of its range.