NIBCO 6002 3/4x1/4 Reducer Wrot Coper Ftg x C 3/4 x 1/4 In

NIBCO 6002 3/4x1/4 reducer is used in plumbing systems for seamlessly transitioning between 3/4-inch and 1/4-inch copper pipes. Its versatile design is crucial for adapting to different pipe sizes, providing flexibility in configuring piping layouts.

Features:

• This NIBCO 6002 3/4x1/4 reducer has a maximum pressure of 582 psi at 100 degrees F.
• It has an outside diameter of 7/8 inch x 3/8 inch for precise and secure connection between pipes of different sizes.
• This reducer has temperature ratings ranging from -20 to 400 degrees F.

Frequently Asked Questions:

Q. How do I install this reducer?

A.

• Turn off the water supply to the area where you'll be working.
• Cut the existing pipes cleanly where the reducer will be installed.
• Apply Teflon tape around the threads of the pipes for a tight seal.
• Screw this reducer onto the threaded end of one pipe.
• Attach the other end of the reducer to the second pipe, ensuring a snug fit.
• Confirm proper alignment of the reducer with both pipes for a straight connection.
• Use adjustable wrenches to securely tighten the connections without overtightening.
• Turn on the water supply and check for leaks.
• Test the plumbing system to ensure smooth water flow.
• Periodically inspect connections for leaks and address promptly if any are found.

Q. What safety precautions should I follow when using NIBCO 6002 3/4x1/4 reducer?

A. When using NIBCO 6002 3/4x1/4 reducer, make sure to wear protective clothing and safety glasses. Additionally, always ensure that the area is well ventilated and that all tools are in good working condition.

Q. What are the factors to consider while choosing a pipe reducer?

A. Major factors include the size of the pipe, the type of material, the pressure rating and the temperature range.

Q. How do I clean and maintain this plumbing fitting?

A.

• To clean and maintain plumbing, use a mild detergent and warm water.
• Make sure to rinse thoroughly and dry completely before using.
• Inspect all components regularly for signs of wear or damage.
• Replace any damaged or worn parts immediately.