MIP RC TOOLS MIP-1620 Strapping Tensioner, Heavy Duty, Manual, Push Type, Feed Wheel, 5/8-1-1/4 Inch Size, Steel

Midwest Industrial Packaging MIP-1620 manual tensioner is designed for steel strapping. It is used for binding items to prevent their movement. It is also ideal for securing heavy loads or loads with round / irregular edges, including lumber, cement blocks and machinery.

Working Mechanism:

• Pull strapping from the cart and place it around the load.
• Push the closed seal, with the flat side of the seal facing the outer face of the strap.
• Slide the end of the strap through the bottom of the seal and field over the end to form a hook.
• Insert the tensioner into the strap.
• Squeeze the tension handle down to the base and put the top strap through the pusher tool, with the seal against the nose of the tool.
• Release the tension handle to clamp back down on the strap.
• Make sure that the strap is flush with the inside edge of the product.
• Move the tension handle back and forth for tightening the strap.
• Seal the pusher seal using a sealer.
• To bend & break the banding, tilt the whole tool forward over the seal (with the seal secured) and back again approximately three times.

Features:

• MIP-1620 strapping tensioner is made of heavy-duty steel to fit strap widths ranging from 5/8 to 11/4 inches.
• It uses a feed wheel push-type seal to pull the strapping tight.

Compatible Accessories:

• MIP Strapping Seals: These closed or push type seals can be used to seal both the ends of wrapped-around strapping.
• MIP Steel Strapping Sealers: They use a front action mechanism for crimping the attached seals.

Standards and Approvals:

• ISO 9001

Frequently Asked Questions:

Q. What is the difference between an open seal and a closed seal?

A. Tensioners for open seals are used on flat surfaces, where strapping is wrapped around the package and overlapped on top. On the other hand, tensioners for closed seals are used on round objects and irregular surfaces.

Q. How can I adjust the tension on this MIP-1620 strapping tensioner?

A. Tension can be adjusted manually using the push-type design and the feed wheel.

Q. What are the factors to consider while choosing this MIP-1620 strapping tensioner?

A. Major factors include strapping size compatibility, material suitability for steel strapping, operational mechanism, tensioning capability, durability, safety features, user-friendliness and maintenance requirements.

Q. How do I clean and maintain this MIP-1620 strapping tensioner?

A.

• Periodically inspect the tensioner for wear, damage or loose parts.
• Wipe the tensioner with a dry, clean cloth to remove dirt and debris.
• Apply a suitable lubricant to moving parts for smooth operation.
• Check and adjust tension settings as per manufacturer guidelines.
• Operate the tensioner gently, avoiding excessive force.
• Store the tensioner in a clean, dry environment to prevent corrosion.
• Promptly replace worn or damaged components with genuine parts.