MAG-MATE RELM20 Electromagnetic Lift Magnet, Round, 20 Inch Diameter

Mag-Mate RELM20 round electro lift magnet provides focused holding power and a deep-reaching magnetic field to lift thick, ferrous items like steel plates, billets, die castings and forgings.

Working Mechanism:

• Clean the workpiece where the lifting magnet will be installed and the bottom of the magnet of any debris.
Place the magnet in the centre of the workpiece.
• After the magnet is in place, switch it to on / hold mode.
• To ensure strong holding force, change the load and slightly lift the piece. To ensure adequate load balance, lower the weight and move the magnet.
• Avoiding significant jarring or swinging of the load will help you transport the workpiece to its intended place.
• Move the load switch past the Off position to the drop / release position while holding for two to three seconds after placing the load over a solid surface.
• The magnet shouldn't be powered up until it makes contact with the following object to be lifted.

Features:

• Mag-Mate RELM20 electromagnetic lifting magnet features a control switch with on, off & release positions for controlling the function of an electromagnet.
• This electromagnet has a maximum holding force of 12000 lb.
• It is equipped with an indicator light that indicates electromagnet functioning.

Standards and Approvals:

• REACH
• RoHS

Frequently Asked Questions:

Q. How does the load capacity of this Industrial Magnetics Mag-Mate RELM20 electromagnetic lifting magnet differ with workpiece thickness?

A.

• 2-1/2 inches or more -12000 lb
• 2 inches: 10000 lb
• 1-1/2 inches: 8000 lb
• 1 inch: 5500 lb
• 3/4 inches: 3000 lb
• 1/2 inches: 1500 lb
• 3/8 inches: 1100 lb
• 1/4 inches: 400 lb

Q. What safety measures should be taken while operating this electromagnetic lift magnet?

A.

• Keep contact pole areas and the load's surface clean and free of dust particles.
• Keep magnets away from moisture.
• Inspect the magnetic poles to ensure they are flat and free of damage.
• Treat pole surfaces with lubricant after usage to reduce the risk of oxidation.