GREENLEE 7806SB Hydraulic Knockout Kit, 8 Ton, 1/2 To 2 Inch Size

Greenlee 7806SB hydraulic knockout kit enables technicians to effortlessly create clean, precise holes in various metallic materials, such as steel, aluminium and fibreglass. It is used in electrical panels and junction boxes.

Working Mechanism:

• Select an appropriate punch, die and draw stud to create the desired hole size.
• Determine and mark the exact location of the hole.
• Drill a pilot hole slightly larger than the draw stud using a Greenlee Kwik-Stepper step bit.
• Extend the ram to its full capacity by turning the release valve knob in the counter-clockwise direction.
• Thread the appropriate draw stud into the ram.
• Slide the corresponding die onto the draw stud and make sure its open end should face away from the punching head.
• Insert the draw stud in the material being punched.
• Thread the punch onto the draw stud until the punch assembly is tightened to the material surface.
• Close the release valve knob and pump the lever handle until the punch has completely penetrated the material.
• Open the release valve.
• Unscrew the punch from the draw stud.
• Slide off the die and remove slugs, if any.

Features:

• It features a Slug-Buster punch profile that splits slugs for easy removal after punching, reducing downtime and effort.
• This hydraulic knockout kit has a knurled edge on punches for tight grip.
• This kit tool has draw studs with dog point tips to eliminate cross-threading thus reducing the risk of damage.

Compatible Accessories:

• Westward 32PJ36 Tool Bag: This polyester tool bag offers superior resistance to abrasion and stains. It dries quickly when wet and is flexible, returning to its original shape after stretching.

Frequently Asked Questions:

Q. What is the material of construction of the workpiece in this set?

A. The workpiece in Greenlee 7806SB hydraulic punch set is made of mild steel to handle recursive loading.

Q. How many tools and attachments are there in this set?

A. This set consists of 11 pieces of tools and attachments to cater to different materials and sizes.

Q. What size of pipes can this punch set handle?

A. Greenlee 7806SB hydraulic punch set can punch holes in pipes having diameters ranging between 1/2 to 2 inches.

Q. Can I detach punches from Greenlee 7806SB hydraulic knockout kit?

A. It is equipped with hex key access for easy removal from the tool, simplifying the process of detaching punches from the hydraulic ram or puller, speeding up tool changes and maintenance and minimising labour time.

Q. How to identify parts in Greenlee 7806SB hydraulic knockout kit?

A. The tools have laser markings for fast and easy identification of parts, helping users quickly find the correct size or part needed for the job thus increasing workflow efficiency.