GRAINGER 410Y53 Mobile Digital Plan Station, 48.25 x 39.3 x 26.79 Inch Size, Tan, Steel

This mobile digital plan station is a professional job box ideal for users requiring data connectivity on the worksite.

Features:

• This mobile digital plan station has a 14-gauge-thick steel floor and 16-gauge steel body construction for structural rigidity.
• It has a power crew including 4 GFCI outlets for safe power, a 32-inch TV monitor and UPS backup power supply to deliver electricity for up to thirty minutes during a power outage.
• This industrial cabinet of the storage box is customisable, enabling users to set up digital systems.
• This 150 lb load-bearing unit is equipped with a drawer to provide independent locking storage and 4-inch wheel casters for smooth mobility.
• It features powder-coated finish to resist corrosion and weighs up to 320 lb when fully loaded with electronics.

Frequently Asked Questions:

Q. What is a TurnKey hub?

A. A TurnKey hub delivers an easy-to-use web interface to manage TurnKey cloud servers and backups.

Q. How to assemble mobile digital plan station?

A.

• Unbolt the padlock tab with a 1/2 inch wrench or socket.
• Place the latch rod in the 'latched' position.
• Mount 5/16 inch x 3/4 inch carriage bolt into the correct hole in the padlock tab.
• Install the padlock shackle into the padlock tab and secure it to the lock box using a locking nut.
• Prior to locking the padlock, open the cover and slide the latch rod into the 'open' position.
• Close the cover and move the latch rod to the 'latched' position.

Q. Which tools are required for installing this digital plan station?

A.

• 1/2 inch socket
• 5/16 inch socket
• Phillips head screwdriver

Q. How to install this digital plan station?

A.

• Remove the mounting bracket by eliminating two #10-24 x 3/4 inch screws, lock washers and flat washers using a 5/16 inch socket.
• Carefully set TV face down on a flat surface.
• Attach the wiring harness and the power supply for the TV.
• Place the mounting bracket and align it with the mounting holes on the back of the TV.
• Fasten the bracket to the TV by using four 1/4 inch lock washers, four M4 bolts and four #10 washers.
• Lift the mounting bracket & TV and hang on the notch in the channel by the hooks on the mounting bracket.
• Reattach the two screws, i.e. lock and flat washers, which were previously removed.