FLUORAMICS 9755555 Caulk Gun For Plunger Green

Working Mechanism:

• Hold the handle and pull back on the trigger.
• The trigger's pin end then pushes the actuator forward.
• Afterwards, the actuator pushes the plunger forward tightly.
• The plunger head then pushes the caulk tube bottom.
• The tube is then held in place by a ring at the end.

Compatible Accessories:

• Fluoramics 9712151 LOX-8 Jar Thread Sealant: This Flouramics 100-gram jar thread sealant is waterproof and used for stainless steel anti-galling.
• Fluoramics 9712152 LOX-8 Jar Grease: This jar grease is NLGI 00 approved to resist corrosion.
• Fluoramics 9712154 LOX-8 Plunger Grease: This plunger grease is NLGI 2 approved for excellent oxidation stability.

Frequently Asked Questions:

Q. What does NLGI-Grade stand for?

A. NLGI-Grade is a measure of the relative hardness of grease used to lubricate the machines. It is approved by National Lubricating Grease Institute.

Q. How to apply LOX-8 grease / lubricants in a machine?

A.

• Apply with a small, disposable stiff brush used only with LOX-8 to avoid contamination.
• Remove LOX-8 with multiple applications of an oxygen-compatible solvent / detergent.

Q. What to do with a caulk gun after using it?

A.

• Insert a long screw / nail that fits tightly into the hole of the nozzle to seal it on a tube of caulking to prevent drying.
• Apply the duct tape over the end of the nail and nozzle.