ENERPAC XA11 Air Driven Hydraulic Pump, 10000 PSI, Single-Acting, 3-Way, Manual

Enerpac XA11 air-driven hydraulic pump converts compressed air into hydraulic power, providing a compact & portable solution for operating hydraulic systems. It is used in the automotive, construction and manufacturing industries for lifting, pressing, clamping and powering tools & machinery.

Working Mechanism:

• This hydraulic pump operates using a reciprocating piston mechanism.
• When compressed air is supplied to the pump, it enters an air motor that drives a piston back and forth.
• As the piston moves forward, it creates a suction effect, drawing hydraulic fluid from the reservoir through an inlet valve.
• The hydraulic fluid then enters the pump's chamber and is pressurized as the piston moves backwards.
• The pressurised hydraulic fluid is delivered through an outlet valve, providing the power needed to operate hydraulic systems such as lifting, pressing, clamping and powering tools & machinery.
• The reciprocating motion of the piston, driven by the compressed air, allows for efficient and reliable hydraulic power generation.

Features:

• This hydraulic pump includes a closed hydraulic system to prevent contaminants from entering the seal and damaging the interior components.
• This unit is integrated with an external pressure setting valve to change the pressure settings and adjust the force applied.
• It has two control pedals to add and release pressure to the tool.
• This pump features a ground screw configuration for additional safety against pump explosion in over-pressure conditions.

Compatible Accessories:

• Enerpac HF100 Hydraulic Oil: It is used for lubricating hydraulic systems, ensuring smooth operation and extending the lifespan of hydraulic components.

Frequently Asked Questions:

Q. What are the factors to consider while choosing an air driven hydraulic pump for my application?

A.

• Maximum operating pressure
• Flow rate
• Hydraulic fluid compatibility
• Safety guidelines
• Operating environment

Q. What safety precautions should I take while operating this air-driven hydraulic pump?

A.

• Ensure the pump is securely mounted or positioned on a stable surface during operation.
• Inspect the pump, hoses and fittings for damage or leaks.
• Operate the pump within its specified pressure range to prevent damage or failure.
• Keep body parts clear of moving parts & pinch points while the pump is running.
• Ensure proper ventilation in the operating area to prevent the buildup of fumes or exhaust gases.
• Use the pump only for its intended purpose and avoid overloading it.
• Immediately shut off the pump and investigate any unusual noises, vibrations or malfunctions.

Q. How to clean and maintain this air-driven hydraulic pump?

A.

• Ensure the pump is turned off & disconnected from the power source before performing any maintenance.
• Wipe down the exterior of pump with a clean, dry cloth to remove dirt and debris.
• Inspect the pump, hoses and fittings for damage, leaks or loose connections.
• Use compressed air or a soft brush to remove dirt and debris from the pump's vents and cooling fins.
• Check and maintain the proper hydraulic fluid level in the reservoir according to the manufacturer's instructions.
• Lubricate moving parts or joints with the appropriate lubricant specified by the manufacturers.
• Keep a maintenance record to track cleaning, fluid changes, filter replacements and repairs conducted on the pump.