ENERPAC P462 Steel Hydraulic Hand Pump, Two Speed, 453 Cu.Inch Usable Oil

Enerpac P462 ultima steel hydraulic hand pump is used for lifting, bolting or applying pressure in construction, manufacturing and repair applications. This pump is ideal for applications requiring higher oil capacity, such as numerous cylinder hookups.

Working Mechanism:

• Hydraulic hand pumps use manual force to convey hydraulic fluid under pressure.
• The handle or lever provides leverage, enabling the user to move an internal piston or plunger.
• The movement of the piston creates pressure on the enclosed hydraulic fluid.
• The pressure converts mechanical energy into hydraulic energy (pressure and flow).
• The pressurised hydraulic fluid can be directed to cylinders or hydraulic tools.
• It powers the cylinder for advancing, retracting or holding loads with a hydraulic tool.
• Hydraulic hand pumps often have control features and safety mechanisms.

Features:

• It features an ergonomic quick grip handle for easy transportation and less user fatigue.
• This hydraulic hand pump comes with a vent-free reservoir which eliminates spilling and has a maximum operating pressure of 10000 psi.
• It advances or retracts a single-acting cylinder or powers a hydraulic tool to hold loads.
• This hydraulic pump offers a wiper system and chrome-plated plunger for durable and long-lasting performance.
• It is equipped with an internal pressure relief valve which provides pump overload protection.

Standards and Approvals:

• ISO 9001:2015

Frequently Asked Questions:

Q. What is the pressure rating of this hydraulic pump?

A. This pump provides first-stage and second-stage pressure ratings of 200 psi & 10000 psi, respectively.

Q. Which type of cylinder can be used with this Enerpac P-462 hydraulic hand pump?

A. This pump is compatible with the brand's single-acting cylinders.

Q. What is the difference between a single-stage and double-stage hydraulic pump?

A. Single-stage pumps utilise only atmospheric pressure for moving fluid, while double-stage pumps use both hydraulic and atmospheric pressure for powering the pump.

Q. How to clean and maintain this Enerpac P-462 steel hydraulic hand pump?

A.

• Ensure that the hydraulic system is depressurised and disconnected from any power source.
• Use a clean cloth or rag to wipe down the exterior of the hand pump, removing any dirt, debris or oil residue.
• Check the pump for any signs of damage, such as leaks, cracks or worn-out parts. If you notice any issues, consult the manufacturer's instructions or contact a professional for repairs.
• Apply a suitable lubricant to the moving parts of the hand pump, such as the handle, plunger and piston, following the manufacturer's guidelines.

Q. How to install this hydraulic hand pump?

A.

• Identify the suitable mounting location for the hydraulic hand pump.
• Securely attach the pump to the chosen mounting surface using the appropriate hardware.
• Connect the hydraulic lines or fittings to the pump according to the system requirements.
• Ensure proper alignment and tight connections to prevent leaks.
• Fill the hydraulic system with the recommended fluid, following the manufacturer's guidelines.
• Bleed the air from the system if necessary, using the specified procedure.
• Check for any leaks and tighten connections if needed.

Q. What is the pressure rating of this hydraulic pump?

A. This pump provides first-stage and second-stage pressure ratings of 200 & 10000 psi, respectively.

Q. What is the difference between a single-stage and double-stage hydraulic pump?

A. Single-stage pumps utilise only atmospheric pressure for moving fluid, while double-stage pumps use both hydraulic and atmospheric pressure for powering the pump.