ENERPAC JH306 Hydraulic Steel Jack, 30 Ton, 6.13 Inch Stroke Length

Enepac JH306 bottle jack is used in automotive repair shops, construction sites and industrial settings to lift SUVs, trucks, sagging foundations, level retaining walls, and raise underground drainage systems having a higher ground clearance than automobiles.

Working Mechanism:

• This bottle jack is positioned under the load for stable and level ground.
• The jack handle is then inserted into the pump socket, and the handle is pumped to raise the piston.
• As the piston rises, the hydraulic fluid is forced into the cylinder, causing the load to lift.
• The height is then adjusted by pumping or releasing pressure on the handle.
• Once the desired height is reached, secure the load or perform the required task.
• Then the pressure is slowly released on the handle to lower the load and allow the hydraulic fluid to return to the reservoir.

Features:

• This 30-ton hydraulic jack has steel construction for structural rigidity and increased durability.
• It features a compact and portable design for ease of transportation and storage.
• This bottle jack is equipped with a built-in safety valve to prevent overloading and ensure safe operation
• It comes with chrome plated finish to resist corrosion on exposed surfaces.

Frequently Asked Questions:

Q. Can this bottle jack be used for both vertical and horizontal lifting applications?

A. Yes, Enerpac JH306 bottle jack is designed to be versatile and can be used for both vertical and horizontal lifting applications. It has a sturdy construction and powerful hydraulic system to effectively lift heavy loads in various orientations, providing flexibility and convenience in different lifting scenarios.

Q. How do I install this Enerpac 30-ton hydraulic jack?

A.

• Prepare a stable and level surface and position the jack under the lifting point.
• Adjust the height by lowering the piston and sliding the jack under the lifting point.
• Pump the handle clockwise to raise the load and secure it with support stands or blocks.
• When finished, lower the load by rotating the handle counterclockwise and store the jack in a safe & dry place.

Q. What safety precautions should be considered while operating this bottle jack?

A.

• Always ensure the load being lifted does not exceed the rated capacity of the bottle jack.
• Inspect the jack for any signs of damage or wear before each use.
• Position the jack on a stable and level surface to prevent tipping or instability.
• Use support stands or blocks to secure the load once it is lifted.
• Keep hands and body clear of the lifting area and avoid placing any body part under the load.
• Operate the jack smoothly and avoid sudden or jerky movements.
• Do not exceed the maximum extension height of the jack.