EATON EDB3200 Molded Case Circuit Breaker, F-Frame, 200A, 3-Pole, Fixed Thermal Magnetic Trip

Eaton EDB3200 circuit breaker is an Eaton C Series circuit breaker used to protect connected devices like receptacles, branch circuits, external motors and HVACs from electrical damage due to excess current (overloads) or short circuits. It has a completely moulded case for enhancing the durability of current-carrying parts, trip devices & mechanisms housed inside it.

Working Mechanism:

• Eaton EDB3200 circuit breaker's contact pass current through it under normal conditions.
• But when a fault or issue is detected, they move away from each other and trip the unit.
• Users should first troubleshoot the issue before resetting the breaker.
• In case of a thermal trip, the circuit breaker needs to cool down before resetting.

Features:

• Eaton EDB3200 circuit breaker has load lug terminals for quick installation of 4 to 4/0 AWG circuit wires.
• This 3-pole complete breaker is equipped with fixed thermal-magnetic trip contacts for high-speed "blow open" action, ensuring efficient performance.
• It has bolt-on mounting style for easy installation on panels and an F-frame for reverse-feed capability.
• The unit's sliding handle actuator has three positions (ON, OFF and trip) for easy identification of the breaker's status.

Compatible Accessories:

• Load Centres, Panels & Switchboards: This Eaton EDB3200 breaker can be mounted easily onto these panelboards, switchboards, motor control centres & load centres for reliable branch circuit protection.

Standards and Approvals:

• UL
• NEMA AB1 / AB3 Enclosure

Frequently Asked Questions:

Q. What are the different performance ratings of this Eaton EDB3200 circuit breaker?

A. Eaton EDB3200 breaker has a current rating of 200A, a voltage rating of 240VAC / 125VDC and an interrupt rating of 22kA at 240VAC.

Q. How to install this circuit breaker?

A.

• Make sure that this Eaton EDB3200 is the correct circuit breaker matching the application requirements.
• Mount the unit on the panel or mounting surface while making sure that the accessory wirings can be reached and that the unit can be bolt-on mounted. Install & tighten the breaker mounting using screws, washers & nuts.
• Install an optional terminal end cover if necessary. Connect the line & load terminals with the accessory leads and install the terminal shield & interphase barrier if required.
• Finally, check all the mounting & terminal connecting hardware.

Q. What are points to inspect before operating this Eaton EDB3200 circuit breaker?

A.

• Keep the area around the breaker clean by using an enclosure. Remove dust, dirt, grease, moisture or foreign contaminants from the unit.
• Check that the unit's mechanical linkages like the actuator are free to move by switching the unit ON & OFF several times.
• Press the push-to-trip button, if available, at the bottom side of the unit to mechanically test the circuit breaker.
• Inspect the unit of any cracks, chipping, discolouration or any sign of overheating. Tighten the terminals & connectors. Check the mounting hardware.
• Remove any safety hazards near the circuit breaker area.