DAYTON 38UK59 Bench Grinder, 120/240V, 1/2 HP Power, 6 Inch Diameter

Dayton 38UK59 bench grinder is used for sharpening, grinding, deburring, shaping and polishing equipment. It is ideal for workshops, garages, metal fabrication shops, tool rooms and maintenance facilities. This bench grinder is equipped with balanced rotors & sealed bearings for smooth operation and has wheel guards to prevent dust and particles from escaping. It comes with 2 tools rests, 3 grinding wheels, standard flat top and a V-grooved top for sharpening drill bits.

Working Mechanism:

• Activate the bench grinder using a power source.
• Rotating grinding wheels on each side of the unit.
• Place the workpiece against the grinding wheel.
• Turn on the grinder, causing the wheels to rotate.
• Abrasive wheels grind material from the workpiece.
• Use handles to guide workpiece for shaping or sharpening.
• Apply coolant if needed for efficiency.
• Continue grinding until desired result, then inspect.
• Turn off the grinder after use for safety and energy savings.

Frequently Asked Questions:

Q. How do I clean and maintain Dayton 38UK59 bench grinder?

A.

• Disconnect the power source to ensure safety.
• Clean off dust and debris from the grinder's surface.
• Check and clean the grinding wheels regularly.
• Keep tool rests clean and adjusted for accuracy.
• Apply lubricant to moving parts as recommended.
• Ensure guards are clean and properly positioned.
• Keep switches and connections clean and dry.
• Periodically inspect for wear, damage or misalignment.
• Seek professional service for major issues or repairs.

Q. What factors should I consider while choosing a bench grinder?

A.

• Activate the bench grinder using a power source.
• Rotating grinding wheels on each side of the unit.
• Place the workpiece against the grinding wheel.
• Turn on the grinder, causing the wheels to rotate.
• Abrasive wheels grind material from the workpiece.
• Use handles to guide workpiece for shaping or sharpening.
• Apply coolant if needed for efficiency.
• Continue grinding until desired result, then inspect.
• Turn off the grinder after use for safety and energy savings.