DAYTON 2ZWN9 Pump Centrifugal 1/3 Hp 1 Ph 115/230v

Dayton 2ZWN9 centrifugal pump is ideal for dispensing fluid at high pressure and speed. It is used in water supply and distribution, wastewater treatment, irrigation, HVAC systems, chemical processing, oil refining and power generation tasks.

Working Mechanism:

• Ensure that the pump and suction lines are filled with the fluid to be pumped to create a prime, ensuring efficient operation.
• Switch on the motor that drives the pump, initiating the pumping process.
• As the motor rotates, it drives the pump impeller, which is mounted directly onto the motor shaft. The impeller creates centrifugal force.
• The spinning impeller draws fluid into the pump through the suction inlet.
• The centrifugal force generated by the rotating impeller causes the fluid to move outward and upward towards the outer edge of the impeller.
• As the fluid moves outward, it gains velocity and kinetic energy due to the high-speed rotation of the impeller.
• The fluid exits the impeller through the discharge outlet located at the periphery of the impeller.

Features:

• It has a cast iron body for structural rigidity and longevity.
• This pump offers overload protection and also protects against overheating and electrical faults.
• It features a carbon / ceramic mechanical seal to prevent leaks and ensure efficient operation.
• The pump's semi-open impeller design efficiently handles solids and debris, reducing clogging and improving pump efficiency.

Compatible Accessories:

• Dayton 3ACE6 Shaft Seal: It is used in machinery and equipment with rotating shafts requiring sealing to prevent leakage.

Frequently Asked Questions:

Q. What is the operating temperature of this Dayton 2ZWN9 centrifugal pump?

A. It has an operating temperature ranging from 40 to 200 degrees F.

Q. Is this centrifugal pump corrosion resistance?

A. Yes, it has an air-dry enamel paint coating that protects against corrosion.

Q. What factors should I consider to select the right centrifugal pump for my application?

A.

• Type of fluid
• Required flow rate
• Pressure Specifications
• Operating temperature
• Pressure
• Fluid viscosity

Q. What safety precautions should I follow when working with centrifugal pumps?

A.

• Before performing maintenance or repair work, ensure that the pump is properly shut down and locked out to prevent accidental startup.
• Use PPE kits, safety glasses, gloves, hearing protection, and protective clothing to guard against potential hazards.
• Stay clear of moving or rotating components of the pump to prevent injury.
• When working in confined spaces where pumps are installed, ensure adequate ventilation to prevent the buildup of hazardous fumes or gases.
• Adhere to established safety guidelines and protocols for working with centrifugal pumps.
• Ensure that personnel involved in operating or maintaining centrifugal pumps receive adequate training on safe practices and procedures.