DAYTON 21UN02 Vertical Band Saw, 15 Inch, 3/4 HP, 111 Inch Blade, 115 / 230 V

Dayton band sawscut the metal, wooden or plastic workpieces of improper size or shape into the desired sizes for repair, furnishing and industrial processes. Dayton vertical band sawsare used to make vertical cuts on workpieces for machine and facility maintenance applications in metal fabrication shops, warehouses, garages, machine shops & timber mills. Dayton 21UN02 vertical bandsaw has 2-speed control with a 45-degree cutting angle.

Working Mechanism:

• Check all the parts are available and in working condition.
• Attach table, rip fence & guide locking knob and set the horizontal stop. Align the table, install the V-belt & mount the saw to the floor.
• Install & tension the blade by aligning the drive wheel & using blade guides.
• Ground the unit & connect it to a power source.
• Set appropriate speed setting according to the workpiece material. Generally, higher speed is used for softer materials.
• Set the rip fence and table setting according to the cut required. Bevel cutting may require tilting the table, whereas angled cuts may require a miter gauge.
• The machine and work area should be cleaned after use.

Features:

• Dayton 21UN02 vertical band saw has all-steel unibody construction with rack & pinion upper blade guide adjustment & large cast-iron ground table (with miter gauge slot) for structural strength, fatigue-free operation & durability.
• It is equipped with a blade having a width ranging from 3/16 to 3/4 inches & rectangular cutting capacity of 8.5 x 14-5/8 inches for effective & smooth cutting.
• This Dayton bandsaw has a 3/4 hp motor for a cutting speed ranging from 2000 to 2800 fpm.
• It comes with a 15 x 15 inch table for a large workspace area, a dust port & wheel cleaning brush to keep the machine & workshop clean and a miter gauge for measuring the angle of miter.
• This Dayton bandsaw having 15 inch blade wheel diameter is powered through a 120 / 240VAC corded power connection.

Compatible Accessories:

• Band Saw Blade: Dayton 21UN02 vertical band saws can be fitted with a new bandsaw blade when the pre-installed blade gets old, damaged or worn-out. They are available in diverse blade width and teeth per inch designs.

Frequently Asked Questions:

Q. What is the difference between a vertical and horizontal bandsaw?

A. Horizontal bandsaws feature a higher cutting rate than vertical bandsaws. Horizontal bandsaws offer optimal squareness by cutting straight cuts, whereas the vertical bandsaws provide flexibility to easily cut out curvy shapes when needed. Horizontal bandsaws generally cut bigger pieces of harder metal, while the vertical bandsaws are used to cut angles & miters in softer metals.

Q. What safety points do users need to remember while operating Dayton 21UN02 vertical band saw?

A.
• Proper tools & equipment should be used to install & operate the unit.
• Workers should wear protective equipment like hair coverings, non-slip safety shoes, safety glasses and face masks.
• Work area near the unit should be clean & free from debris to prevent accidents.
• The unit & attached electrical connections should be grounded and kept away from wet environments to prevent shocks.
• Users should remain away from the unit's moving parts and cutting blades.