ABANAKI STUBE1 Tube Oil Skimmer Tube Tastic(tm)

Abanaki STUBE1 tube oil skimmer is used to skim the surface of fluid to remove floating oil or grease using skimming media. This TubeTastic! unit skims oil from machining centres with little or no access to the coolant sump from above. It is widely used in the food industry to remove vegetable oil and grease.

Working Mechanism:

• The collector tube goes through the surface of the coolant and collects undesirable oils by using an existing aperture or constructing a small access notch.
• The oil is then discharged through the discharge tube into a waste oil receptacle for disposal.

Features:

• Abanaki STUBE1 tube oil skimmer has a fan-cooled continuous duty motor to support long operating hours.
• This TubeTastic! unit can be easily mounted to the side of any machining centre coolant slump.
• It picks up oil and grease quickly, with a pickup rate of 1-1/2 GPH.

Compatible Accessories:

• Abanaki BTUBE18 Skimmer Tubes: These 18-inch tubes are installed on the oil skimmer to increase its reception range.
• Abanaki BTUBE24 Skimmer Tubes: These 24-inch tubes are connected to the oil skimmer to gain access to hard-to-reach places.

Frequently Asked Questions:

Q. How to install Abanaki tube oil skimmer?

A.

• Remove the top of the tube drive assembly by unscrewing the two self-tapping screws.
• Remove the front gear sprocket and wrap the tubing around it.
• Slide the steel washer and tube wiper seal so that they are on the base's exterior face.
• Spray the tubing with a lubricant.
• Assemble the tube drive assembly onto the motor shaft carefully.
• Mount the oil skimmer using the two holes in the mounting bracket.
• Connect the three-prong cord to a grounded outlet.
• Place an appropriate collection container beneath the discharge trough.

Q. What is the power rating of this device?

A.

• Voltage: 110V
• Frequency: 60Hz

Q. What is the maximum oil temperature that this oil skimmer can withstand?

A. 140 degrees Fahrenheit.