Sign In

EATON C361 Type Rotary Disconnect Main Switches

Eaton Type C361 rotary disconnect switches are designed for disconnecting an electrical circuit in the case of emergency stoppage, service or maintenance.

Filter
StyleModelPrice
A
C361FNE1
£1,032.91
A
C361ND
£540.47
A
C361SD162R
£918.81
A
C361SD262R
£1,078.95
A
C361SF264
£2,217.95
B
C361SE263
£1,086.95
A
C361FSD162
£908.79
A
C361ND2
£908.79
A
C361SC61
£586.52
A
C361SD122R
£866.76
A
C361SC21
£540.47
A
C361SC261
£952.83
A
C361SE1263
£1,299.14
A
C361SC261R
£978.87
A
C361SC161
£786.70
A
C361SC121R
£778.69
A
C361SF1264
£2,426.14
A
C361SD262
£1,054.92
A
C361SC161R
£818.71
A
C361FSC161R
£818.71
A
C361NE1
-
RFQ
A
C361FSC121
£750.67
A
C361FNC1
£686.60
A
C361FSC161
£786.70
A
C361NE
£778.69
A
C361NF1
-
RFQ
A
C361NF
-
RFQ
A
C361SC221R
£946.84
A
C361SC121
£750.67
A
C361SD122
£842.74
A
C361NC2
£850.74
A
C361NC
£484.43
A
C361ND1
£750.67
A
C361SD62
-
RFQ
A
C361SD22
£634.55
A
C361SE2263
£1,461.29
A
C361NC1
-
RFQ
A
C361SD162
-
RFQ

Features

  • These units are available in fused and non-fused versions. Non-fuse styles permit the use of their fuse holders, while fused switches (with integral fuse carriers) reduce panel space requirements.
  • They are suitable for installation in control enclosures having a right-hand flange and can accommodate copper or aluminium wires with sizes ranging between #2 and 14 AWG.

Standards and Approvals

  • CSA
  • UL

Frequently Asked Questions

What is an overcurrent protection device?

Overcurrent protection device is used to protect against the potentially dangerous effects of overcurrents, such as an overload or a short-circuit current, that might damage the device or equipment.

What are the NEMA 4 enclosures?

NEMA 4 enclosures are weather-tight enclosures constructed for either indoor or outdoor, protecting against falling dirt, rain, sleet, snow, windblown dust, splashing water and hose-directed water.

How to determine disconnect switch size?

  • The disconnect switch must have an ampere rating of at least 115 percent of the rated motor full load current.
  • The switch must have the same horsepower rating or greater as the rated motor horsepower (at applied voltage).

We are here to help!

Looking for a part not listed here?