Sign In

DAYTON Sewage / Trash Centrifugal Pumps

Filter
Agency Compliance: None , Bearing Type: Ball , Duty: Continuous , Housing Material: Cast iron , Hz: 60 , Impeller Material: Stainless Steel , Max. Case Pressure: 60 PSI , Max. Fluid Viscosity: 100 SSU , Max. Specific Gravity: 1.0 , Motor Enclosure: TEFC , Phase: 3 , Port Rotation: None , Screw Material: Zinc Plated , Seal Type: Mechanical , Volute Material: Cast Iron
StyleModelGPM of Water @ 80 Ft. of HeadGPM of Water @ 30 Ft. of HeadAmpsBest Efficiency Range GPM @ HeadDrain PlugFrameGPM of Water @ 20 Ft. of HeadGPM of Water @ 25 Ft. of HeadPrice
A
4YU36
-788.3-7.6/3.870-94 GPM @ 33-24 Ft3/8" NPT56J105100£2,289.48
B
12N807
5827718.8-17.8/8.932 to 49 @ 266 to 174 Ft.3/4" NPT184JM357315£4,150.88
A
12N806
6513913.4-12.6/6.358 to 77 @ 105 to 71 Ft.3/4" NPT184JM148144£3,520.75
B
12N808
15632025.6-24.4/12.250 to 62 @ 268 to 230 Ft.3/4" NPT215JM331325£5,003.88
B
12N809
240-34.6/17.342 to 65 @ 480 to 330 Ft.3/4" NPT215JM--£6,001.91

Sewage / Trash Centrifugal Pumps

Dayton sewage / trash centrifugal pumps are designed for transporting sewage & untreated wastewater from a sewage basin to a septic tank or sewer system. They are installed at the bottom of a sewage basin and are ideal for liquid transfer, irrigation and water & sewage treatment. These pumps are powered by continuous-duty, totally enclosed fan-cooled motors for rotating semi-open / non-clog stainless steel impellers. The components are made from carbon, ceramic, Buna-N, CI and stainless steel for chemical resistance and compliance with regulations. They are equipped with seals to prevent water from reaching the electrical components and ball bearings for smooth operation. The self-priming mechanism maintains a required liquid level inside the cavity or pump body, necessary to start the pumping process. Choose from a wide range of submersible sewage pumps, available in 3 phase and capacitor start motor variants on Raptor Supplies.

We are here to help!

Looking for a part not listed here?