sales@raptorsupplies.co.uk WhatsApp 0203 287 5224
Sign In

DAYTON Sprinkler Pumps, 2 HP, 1 Phase

Dayton sprinkler pumps have 2 hp, 1-phase motors. They are used for self-priming applications such as sprinkling, spraying, irrigation and dewatering of lawns & agricultural lands. These pressure ...Read More

Filter
DAYTON 5RWG9A
Bearing Type: Double Shielded Pre Lubricated Ball , Drain Plug: Yes , Duty: Continuous , Housing Material: Cast iron , HP: 2 , Hz: 60 , Impeller Material: Stainless Steel , Impeller Type: Closed , Length: 18.75" , Max. Case Pressure: 150 PSI , Max. Fluid Viscosity: 31 SSU , Max. Specific Gravity: 1 , Motor Enclosure: TEFC , Motor Type: Capacitor-Start, Capacitor-Run , NEMA/IEC Frame: 56J , Outlet: 1-1/2" , Phase: 1 , Port Rotation: 90 Degrees Increments , RPM: 3450 , Screw Material: Plated Steel , Seal Application: Nonflammable Liquids Compatible with Pump Components , Seal Material: Buna-N, Carbon, Ceramic, Stainless Steel , Seal Type: Buna N O-Ring Casing, Mechanical , Service Factor: 1.2 , Shaft Material: Stainless Steel , Suction Lift: 25 Ft. , Thermal Protection: Automatic Reset , Type: Self-Priming , Voltage: 115/208-230 , Volute Material: Cast Iron , Wetted Materials: Cast Iron, Stainless Steel, Buna-N, Carbon, Ceramic , Width: 8"
StyleModelFrameInlet PressureAmpsGPM @ 20 PSIGPM @ 40 PSIHeightBest Efficiency GPM @ HeadMax. HeadPrice
A
5RWG9		56J96 PSI26.2/13.6 -13.1753710 11/16"42 @ 80 Ft.124 ft.£1,396.44
A
5RWH0		56JZ75 PSI22.8/12.5-11.459459.25"40 @ 105 Ft.173 ft.£1,436.59

Sprinkler Pumps, 2 HP, 1 Phase

Dayton sprinkler pumps are self-priming pressure pumps that provide better efficiency by removing the air pockets and are ideal for use with non-flammable liquids compatible with pump component materials. The pump housing is made from durable cast iron and includes a TEFC, capacitor star motor capable of a maximum output of 2 HP. These manually operated pumps feature built-in thermal overload protection with automatic reset and double-shielded, pre-lubricated ball bearings for smooth operation. The stainless steel impellers are ideal for withstanding wet operations, while Buna-N, carbon & ceramic seals prevent leakage. Choose from a wide range of sprinkler pumps, available in 75 and 96 PSI pressure ratings on Raptor Supplies.

Features

  • Dayton sprinkler pumps use a 2 hp, capacitor-run & capacitor-start motor with a TEFC enclosure to prevent entry of debris inside the unit.
  • They are equipped with Buna-N, carbon & ceramic seals for preventing leakage.
  • These manually operated pumps have built-in thermal overload protection with automatic reset for protecting the unit and double-shielded, pre-lubricated ball bearings for smooth operation.
  • They deliver pressure up to 75 psi.
  • These non-submersible pumps have 56J / 56JZ frames and feature front drain plug and removable & replaceable volute / diffusers for long-term operation.

Compatible Accessories

Standards and Approvals

  • CSA

Frequently Asked Questions

What materials are used for constructing these Dayton sprinkler pumps?

The housing of these pumps is made from cast iron for durability & structural strength and the impellers are made of stainless steel for corrosion resistance in wet environments.

What are the power requirements of these sprinkler pumps?

These Dayton sprinkler pumps operate at voltages ranging from 120 to 240VAC.

What are the sizes of inlet & outlet connections of these pumps?

These 2 hp sprinkler pumps have outlet & inlet connections of 1-1/2 inch NPT.

What is the suction lift of these sprinkler pumps?

These pumps have a suction lift of 25 feet.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More