How to maintain Y and basket strainers?

For every strainer installation, routine cleaning is necessary.Pressure gauges should be installed on the inlet & outlet sides of the strainer to help determine when the screen needs to be cleaned.The pressure loss will typically be double that of a clean screen when the screen is 50 per cent clogged. It should not be permitted for the pressure drop to exceed 30 psi.Never disassemble the strainer when the line is under pressure or if a screen needs to be cleaned or replaced.

How to install these Y-type strainers?

Verify that the media and the strainer materials are compatible.Verify that the pipe & strainer are correctly aligned and provide sufficient support.Ensure that all pipe end connectors are clean and debris-free.Before installing the strainer, apply pipe sealant (pipe dope, Teflon tape, Loctite) to the male end pipe.Verify that the body's arrow points in the same direction as the flow.Use a wrench with flat jaws that correctly fit the hex flats on the strainer body and a pipe wrench on the pipe next to the strainer.Never use a pipe wrench to remove strainers from pipes.Do not ever use an installation torque through the strainer.A pipe joint seal can be established with correct thread sealant application without requiring a lot of turning effort.Before installing the strainer, check the system for leaks.

How can we replace the self-aligning screen of these Y-type strainers?

Drain and depressurise the system.Drain the body by opening the ball valve, removing the drain stopper, or loosening the cap.Take the strainer's cap off.Discard or clean the old screen after removal.Change the PTFE gasket's O-ring.Position the screen in the cap.Set up the line and start the cap into the body by hand.After the cap is finger-tight, use a wrench to tighten it for at least two turns.Use thread compound or sealant to reinstall the plug or ball valve.If a leak develops during the test, repeat the steps from starting.

Y And Basket Strainers

Filter

Y and basket strainers are suitable for the in-line removal of sediment, dirt, debris and solids from fluids. They are used as fluid control applications in meters, steam traps, regulators,...Read more

BANJO FITTINGS -

Y Strainer 1 1/2 Inch

Style	Model	Max. Operating Pressure	Connection	Connection Type	Max. Pressure	Mesh Size	Pipe Size	Screen	Price (inc. VAT)
A	LS150-50V	-	-	-	-	50	-	-	£92.11	RFQ
B	LS150-30	150 psi	FNPT	FNPT x FNPT	150 psi	30	1.5"	316 Stainless Steel	£96.59
B	LS150-50	150 psi	FNPT	-	150 psi	50	-	316 Stainless Steel	£103.72
B	LS150-80	150 psi	FNPT	-	150 psi	80	-	316 Stainless Steel	£103.82
C	LS150-12	150 psi	-	-	-	12	-	-	£95.14
D	LS150-06	150 psi	-	-	-	6	-	-	£93.96
D	LS150-20	150 psi	-	-	-	20	-	-	£110.42
E	LS150-120	150 psi	-	-	-	20	-	-	£93.96

GEORG FISCHER -

Y Strainer Pvc 1 Inch

Style	Model	Size	Price (inc. VAT)
A	192306400	1"	£145.59
A	192306500	1.5"	£245.18
A	192306549	1.5"	£279.37

KISSLER & CO -

Basket Strainers

Style	Model	Price (inc. VAT)	Pkg. Qty.
A	59-2005	£4.76	1
B	59-2015	£13.21	5

GRAINGER -

Y Strainers

Style	Model	Pipe Size	Width	Flow Rate	Height	Housing Material	Item	Length	Max. Pressure	Price (inc. VAT)
A	1257015	-	-	-	-	-	Y Strainer	-	-	£323.72
B	1/4 581 CS replacement screen	-	-	-	-	-	Screen	-	-	£37.20
C	1257040	-	-	-	-	-	Y Strainer	-	-	£1,297.83
D	1256040	-	-	-	-	-	Y Strainer	-	-	£1,338.09
E	3186020	-	-	-	-	-	Screen	-	-	£66.82
E	3187005	-	-	-	-	-	Screen	-	-	£39.42
F	S202-S1	-	-	-	-	-	Y Strainer	-	-	£26.90
G	06S011N03112	-	-	-	-	-	Strainer	-	-	£108.10
G	06S011N03010	-	-	-	-	-	Strainer	-	-	£68.44
G	06S011N03020	-	-	-	-	-	Strainer	-	-	£160.79
G	06S011N03034	-	-	-	-	-	Strainer	-	-	£40.89
G	06S011N03038	-	-	-	-	-	Strainer	-	-	£26.98
H	1/4 581 SS Srewed end	-	-	-	-	-	Y Strainer	-	-	£255.74
A	1257020	-	-	-	-	-	Y Strainer	-	-	£323.69
I	21/2 781 CS-N Flanged	-	-	-	-	-	Y Strainer	-	-	£992.60
J	3-FSC	-	-	-	-	-	Strainer	-	-	£770.75
K	4-FSC	-	-	-	-	-	Y Strainer	-	-	£1,152.57
E	3187030	-	-	-	-	-	Screen	-	-	£69.73
E	3188020	-	-	-	-	-	Screen	-	-	£67.86
E	3188030	-	-	-	-	-	Screen	-	-	£72.98
E	3188040	-	-	-	-	-	Screen	-	-	£95.49
E	3186010	-	-	-	-	-	Screen	-	-	£46.75
E	3186040	-	-	-	-	-	Screen	-	-	£109.20
E	3187015	-	-	-	-	-	Screen	-	-	£57.37
E	3188010	-	-	-	-	-	Screen	-	-	£50.32

HAYWARD -

YS Series Y-strainer, 4 Inch

Style	Model	Connection	Housing Material	Material	Width	Price (inc. VAT)
A	YS10400S	Socket	PVC	PVC	6.18"	£1,244.75
B	YS20400S	Socket	CPVC	CPVC	5.75"	£2,241.51
B	YS20400T	Thread	-	CPVC	5.75"	£2,241.06
A	YS10400T	Threaded	-	PVC	6.18"	£1,244.75
C	YS10400TU	Threaded	-	PVC	6.18"	£1,495.05

BANJO FITTINGS -

Y Strainer 1 1/4 Inch

Style	Model	Mesh Size	Screen Size	Price (inc. VAT)
A	LS125-20	20	20 Mesh	£42.21
A	LS125-40	40	40 Mesh	£40.91
A	LS125-80	80	80 Mesh	£46.44

BANJO FITTINGS -

Y Strainer 1 Inch

Style	Model	Mesh Size	Screen Size	Price (inc. VAT)
A	LS100-20	20	20 Mesh	£45.74
A	LS100-40	40	40 Mesh	£47.60
A	LS100-80	80	80 Mesh	£41.95

BANJO FITTINGS -

Y Strainer 2 Inch

Style	Model	Max. Operating Pressure	Connection	Connection Type	Mesh Size	Pipe Size	Screen	Screen Material	Price (inc. VAT)
A	LS200-50	-	FNPT	-	50	-	316 Stainless Steel	-	£95.23
B	MLS222-10	-	-	-	10	-	-	-	£162.53
C	MLS222-50PS	-	-	-	50	-	-	-	£249.04	RFQ
B	MLS222-50	-	-	-	50	-	-	-	£164.55
D	MLS200-50M	-	-	-	50	-	-	-	£117.23
E	MLS222IBC	-	-	-	-	-	-	-	£113.59
B	MLS222BC	-	-	-	-	-	-	-	£88.29
C	MLS200BB	-	-	-	-	-	-	-	£62.09	RFQ
C	MLS100-50	-	-	-	50	-	-	-	£52.85
F	MLS100-20	-	-	-	20	-	-	-	£51.51
A	LS200-80	-	FNPT	-	80	-	316 Stainless Steel	-	£95.37
A	LS200-30	-	FNPT	FNPT x FNPT	30	2"	316 Stainless Steel	316 Stainless Steel	£95.63
C	MLS222-16V	-	-	-	16	-	-	-	£172.35	RFQ
B	MLS222-80	-	-	-	80	-	-	-	£162.53
B	MLS222-16	-	-	-	16	-	-	-	£162.53
B	MLS222-08	-	-	-	8	-	-	-	£162.53
G	MLS100-40	-	-	-	40	-	-	-	£47.41
C	MLS222I-80	-	-	-	80	-	-	-	£150.62
B	MLS222-04	-	-	-	4	-	-	-	£147.79
B	MLS222-30	-	-	-	30	-	-	-	£164.55
C	MLS200-100M	-	-	-	100	-	-	-	£106.59	RFQ
H	LS200-100	-	-	-	100	-	-	-	£101.45
I	MLS222I-50V	-	-	-	50	-	-	-	£199.92
B	MLS222-100	-	-	-	100	-	-	-	£162.53
H	LS200-20	-	-	-	20	-	-	-	£95.14

APPROVED VENDOR -

Y Strainer Fnpt Bronze

Style	Model	Height	Length	Max. Pressure	Pipe Size	Screen Size	Size	Width	Price (inc. VAT)
A	GGS_2NYZ7	1 5/16"	-	400 @ 210 Degrees F, 125 @ 353 Degrees F	-	0.593"	3/8"	2.38"	£19.43
A	GGS_2NYZ6	1.25"	1"	400 @ 210 Degrees F, 125 @ 353 Degrees F	1/4"	0.394"	1/4"	2"	£17.78
A	GGS_2NYZ8	1.375"	-	400 @ 210 Degrees F, 125 @ 353 Degrees F	-	0.593"	1/2"	2.75"	£34.14
A	GGS_2NYZ9	1.625"	1 9/20"	400 @ 210 Degrees F, 125 @ 353 Degrees F	3/4"	0.878"	3/4"	3.187"	£54.23
A	GGS_2NZA2	2.5"	-	400 @ 210 Degrees F, 125 @ 353 Degrees F	-	1.362"	1.25"	4.437"	£69.77
A	GGS_2NZA1	2.125"	-	400 @ 210 Degrees F, 125 @ 353 Degrees F	-	1.093"	1"	3.75"	£79.42
A	GGS_2NZA3	3"	-	400 @ 210 Degrees F, 125 @ 353 Degrees F	-	1.562"	1.5"	4.88"	£164.00
A	GGS_2NZA6	6.25"	-	300 @ 210 Degrees F, 125 @ 353 Degrees F	-	3.264"	3"	10.187"	£480.46

GEORG FISCHER -

Y Strainer Pvc Inch

Style	Model	Size	Price (inc. VAT)
A	192306300	1/2"	£103.26
A	192306650	3"	£603.18
A	192306350	3/4"	£130.38

SSI -

Y Strainer

Style	Model	Material	Price (inc. VAT)
A	0125-1500Y2TC-1	Carbon Steel	£680.87
A	0125-1500Y2TT-1	Stainless Steel	£1,624.97

APPROVED VENDOR -

Y Strainer, Cast Iron Body

Style	Model	Height	Size	Width	Price (inc. VAT)
A	20H622	2.187"	3/8"	3.187"	£5.44
A	20H623	2.187"	1/2"	3.187"	£13.05
A	20H624	2.437"	3/4"	3.75"	£47.42
A	20H625	2.625"	1"	4"	£69.73
A	20H626	3.375"	1.25"	5"	£31.61
A	20H627	3.875"	1.5"	5.75"	£105.23
A	20H628	4.75"	2"	7"	£164.44
A	20H629	5.875"	2.5"	9.25"	£123.12
A	20H630	6"	3"	10"	£362.69

MUELLER STEAM -

Y Type Strainer

Style	Model	Class	Connection	Material	Max. Pressure	Screen Size	Size	Price (inc. VAT)
A	4 758 N	-	FNPT	Cast Iron	200 @ 150 Degrees F For WOG, 125 @ 450 Degrees F For Steam	0.062"	4mm	£615.20
B	4 782SS -N	-	FNPT	Cast Stainless Steel	285 @ 100 Degrees F For WOG, 150 @ 565 Degrees F For Steam	0.062"	4mm	£5,056.08
B	3 782 SS-N flanged end	-	FNPT	Cast Stainless Steel	285 @ 100 Degrees F For WOG, 150 @ 565 Degrees F For Steam	0.062"	3"	£3,095.93
B	21/2 782 SS-N flanged ends	-	FNPT	Cast Stainless Steel	285 @ 100 Degrees F For WOG, 150 @ 565 Degrees F For Steam	0.062"	2.5"	£2,431.11
A	3 758 N Iron Body	125	FNPT	Cast Iron	200 @ 150 Degrees F For WOG, 125 @ 450 Degrees F For Steam	0.062"	3"	£348.60
A	21/2 758N Iron Body flanged	125	FNPT	Cast Iron	200 @ 150 Degrees F For WOG, 125 @ 450 Degrees F For Steam	0.062"	2.5"	£257.78
B	4 781 SS- N flanged	150	Flanged	Cast Stainless Steel	285 @ 100 Degrees F For WOG, 150 @ 565 Degrees F For Steam	0.062"	4mm	£3,738.61
C	3 781 CS-N flanged ends	150	Flanged	Cast Carbon Steel	1480 @ 100 Degrees F For WOG, 1010 @ 750 Degrees F For Steam	1/16"	3"	£1,265.68
C	4 781 CS-N flanged end	150	Flanged	Cast Carbon Steel	1480 @ 100 Degrees F For WOG, 1010 @ 750 Degrees F For Steam	1/16"	4mm	£1,823.71
B	21/2 781 SS-N Flanged end	150	Flanged	Cast Stainless Steel	285 @ 100 Degrees F For WOG, 150 @ 565 Degrees F For Steam	0.062"	2.5"	£1,941.03
B	3 781 SS-N flanged	150	Flanged	Cast Stainless Steel	285 @ 100 Degrees F For WOG, 150 @ 565 Degrees F For Steam	0.062"	3"	£2,498.69
D	3 752 Iron body flanged	250	Class 250 Flange	Cast Iron	500 @ 150 Degrees F For WOG, 250 @ 450 Degrees F For Steam	0.062"	3"	£663.72
D	4 752 iron body flanged	250	Class 250 Flange	Cast Iron	500 @ 150 Degrees F For WOG, 250 @ 450 Degrees F For Steam	0.062"	4mm	£1,198.66
E	1/2 582 CS socket weld	600	Socket Weld	Cast Carbon Steel	1480 At 100 Deg F For WOG, 1010 At 750 Deg F For Steam	1/16"	1/2"	£184.14
F	11/2 581 CS screwed end	600	FNPT	Cast Carbon Steel	1480 @ 100 Degrees F For WOG, 1010 @ 750 Degrees F For Steam	1/16"	1.5"	£286.34
G	11/4 581 SS screwed end	600	FNPT	Cast Stainless Steel	1480 @ 100 Degrees F For WOG, 1010 @ 750 Degrees F For Steam	1/16"	1.25"	£568.94
G	1 581 SS screwed end	600	FNPT	Cast Stainless Steel	1480 @ 100 Degrees F For WOG, 1010 @ 750 Degrees F For Steam	1/16"	1"	£446.36
G	1/2 581-SS screwed end	600	FNPT	Cast Stainless Steel	1480 @ 100 Degrees F For WOG, 1010 @ 750 Degrees F For Steam	1/16"	1/2"	£284.15
E	1 582 CS socket weld	600	Socket Weld	Cast Carbon Steel	1480 At 100 Deg F For WOG, 1010 At 750 Deg F For Steam	1/16"	1"	£169.69
F	1 581 CS Screwed ends	600	FNPT	Cast Carbon Steel	1480 @ 100 Degrees F For WOG, 1010 @ 750 Degrees F For Steam	1/16"	1"	£285.02
F	2 581 CS screwed end	600	FNPT	Cast Carbon Steel	1480 @ 100 Degrees F For WOG, 1010 @ 750 Degrees F For Steam	1/16"	2"	£338.17
F	11/4 581 CS srewed end	600	FNPT	Cast Carbon Steel	1480 @ 100 Degrees F For WOG, 1010 @ 750 Degrees F For Steam	1/16"	1.25"	£233.23
F	1/2 581 CS screwed end	600	FNPT	Cast Carbon Steel	1480 @ 100 Degrees F For WOG, 1010 @ 750 Degrees F For Steam	1/16"	1/2"	£111.54
F	1/4 581CS Screwed ends	600	FNPT	Cast Carbon Steel	1480 @ 100 Degrees F For WOG, 1010 @ 750 Degrees F For Steam	1/16"	1/4"	£279.68
E	1/4 582 CS socket weld	600	Socket Weld	Cast Carbon Steel	1480 At 100 Deg F For WOG, 1010 At 750 Deg F For Steam	1/16"	1/4"	£311.54

HAYWARD -

YS Series Y-strainer 1 1/2 Inch

Style	Model	Connection	Connection Type	Height	Material	Width	Price (inc. VAT)
A	YS10150S	Socket	Socket	5.85"	PVC	2.94"	£268.26
B	YS00150S	Socket	-	5.85"	Clear PVC	2.94"	£274.60
C	YS20150S	Socket	-	5.81"	CPVC	2.63"	£737.39
C	YS20150T	Thread	-	5.81"	CPVC	2.63"	£758.63
A	YS10150T	Threaded	-	5.85"	PVC	2.94"	£263.59
B	YS00150T	Threaded	Threaded	5.85"	Clear PVC	2.94"	£273.31
D	YS10150TU	Threaded	-	5.85"	PVC	2.94"	£304.48

HAYWARD -

YS Series Y-strainer 1 Inch

Style	Model	Connection	Material	Width	Price (inc. VAT)
A	YS10100S	Socket	PVC	2.16"	£144.73
B	YS00100S	Socket	Clear PVC	2.16"	£151.48
C	YS20100S	Socket	CPVC	2"	£473.24
C	YS20100T	Thread	CPVC	2"	£473.10
A	YS10100T	Threaded	PVC	2.16"	£144.73
D	YS00100T	Threaded	Clear PVC	2.16"	£148.96
E	YS10100TU	Threaded	PVC	2.16"	£161.91

HAYWARD -

YS Series Y-strainer 1/2 Inch

Style	Model	Connection	Connection Type	Housing Material	Material	Screen Size	Width	Price (inc. VAT)
A	YS10050S	Socket	-	-	PVC	1/32"	1.5"	£116.33
B	YS00050S	Socket	Socket	PVC	Clear PVC	1/32"	1.5"	£119.25
C	YS20050S	Socket	-	-	CPVC	1/32"	1.38"	£329.48
C	YS20050T	Thread	Threaded	CPVC	CPVC	1/32"	1.38"	£329.97
A	YS10050T	Threaded	-	-	PVC	1/8"	1.5"	£116.98
B	YS00050T	Threaded	-	-	Clear PVC	1/32"	1.5"	£119.82
D	YS10050TU	Threaded	-	-	PVC	1/32"	1.5"	£130.40

HAYWARD -

YS Series Y-strainer 2 1/2 Inch

Style	Model	Connection	Price (inc. VAT)
A	YS10250S	Socket	£563.55
A	YS10250T	Threaded	£567.01
B	YS10250TU	Threaded	£604.25

HAYWARD -

YS Series Y-strainer 2 Inch

Style	Model	Connection	Connection Type	Housing Material	Material	Width	Price (inc. VAT)
A	YS10200S	Socket	-	-	PVC	3.75"	£311.30
B	YS00200S	Socket	Socket	PVC	Clear PVC	3.75"	£322.74
C	YS20200S	Socket	Socket	CPVC	CPVC	3.38"	£956.73
C	YS20200T	Thread	-	-	CPVC	3.38"	£956.73
A	YS10200T	Threaded	-	-	PVC	3.75"	£311.30
B	YS00200T	Threaded	-	-	Clear PVC	3.75"	£321.23
D	YS10200TU	Threaded	Threaded	PVC	PVC	3.75"	£339.27

HAYWARD -

YS Series Y-strainer 3/4 Inch

Style	Model	Connection	Connection Type	Height	Material	Width	Price (inc. VAT)
A	YS00075S	Socket	Socket	3.75"	Clear PVC	2"	£134.98
B	YS20075S	Socket	-	3.72"	CPVC	1.69"	£395.15
C	YS10075S	Socket	Socket	3.75"	PVC	2"	£131.87
B	YS20075T	Thread	-	3.72"	CPVC	1.69"	£394.81
C	YS10075T	Threaded	-	3.75"	PVC	2"	£137.97
A	YS00075T	Threaded	Threaded	3.75"	Clear PVC	2"	£134.98
D	YS10075TU	Threaded	-	3.75"	PVC	2"	£151.70

SSI -

Y Strainer, High Pressure

Style	Model	Housing Material	Material	Pipe Size	Screen Size	Size	Width	Price (inc. VAT)
A	0075-1500Y1TT-1	-	Stainless Steel	-	1/32" Perf	3/4"	4.25"	£486.14
A	0100-1500Y1TT-1	-	Stainless Steel	-	1/32" Perf	1"	5"	£921.01
B	0200-1500Y2TC-B	-	Carbon Steel	-	3/64" Perf	2"	9.375"	£1,110.02
C	0200-1500Y2TT-B	-	Stainless Steel	-	3/64" Perf	2"	9.375"	£2,725.42
B	0050-1500Y1TC-1	-	Carbon Steel	-	1/32" Perf	1/2"	3 15/16"	£133.23
B	0075-1500Y1TC-1	-	Carbon Steel	-	1/32" Perf	3/4"	4.25"	£200.61
B	0100-1500Y1TC-1	-	Carbon Steel	-	1/32" Perf	1"	5"	£351.41
C	0150-1500Y2TT-1	-	Stainless Steel	-	1/32" Perf	1.5"	8.38"	£2,087.48
B	0150-1500Y2TC-1	Carbon Steel	Carbon Steel	1.5"	1/32" Perf	1.5"	8.38"	£808.20
A	0050-1500Y1TT-1	Stainless Steel	Stainless Steel	1/2"	1/32" Perf	1/2"	3 15/16"	£354.35

MUELLER STEAM -

Y Strainers

Style	Model	Class	Connection	Material	Max. Pressure	Screen Size	Size	Price (inc. VAT)
A	2 782 SS-N flanged end	-	FNPT	Cast Stainless Steel	285 @ 100 Degrees F For WOG, 150 @ 565 Degrees F For Steam	0.062"	2"	£2,063.86
A	6 782 SS -N flanged end	-	FNPT	Cast Stainless Steel	285 @ 100 Degrees F For WOG, 150 @ 565 Degrees F For Steam	0.125"	6	£8,851.08
B	2 77F-DI-125	125	Class 250 Flange	Cast Iron	500 @ 150 Degrees F For WOG, 250 @ 450 Degrees F For Steam	0.062"	2"	£633.84
C	2 758N	125	Flanged	Cast Iron	200 @ 150 Degrees F For WOG, 125 @ 450 Degrees F For Steam	0.045"	2"	£451.75
B	6 752 Iron Body flanged	250	Class 250 Flange	Cast Iron	500 @ 150 Degrees F For WOG, 250 @ 450 Degrees F For Steam	0.062"	6	£1,673.75

123...9

Y And Basket Strainers

Y and basket strainers are used for screening out debris, rust, dust and other contaminants accumulated in the pipelines. These units feature a mesh cylinder which captures large particulates that can otherwise interfere with the operation of valves, pumps and meters. Raptor Supplies offers a wide range of these strainers from brands like Apollo, Banjo, Bell & Gossett, Grainger, Hayward, Watts, Wilkins, SSI, Mueller Industries, Mueller Steam and GF Piping Systems. Hayward basket strainers provide a large straining area for an uninterrupted flow and withstanding pressure ratings up to 150 psi. These units facilitate quick cleaning and replacement by simply removing the threaded plugs from the cover, and can be mounted horizontally for performing well in high-flow applications. Mueller Steam Y-strainers are designed for flushing out pipe scale, gaskets and debris with the help of a screen chamber attached to a valve, without hindering the flow. These strainers feature cast iron construction with a tapered seat for an excellent fit. They are available in flanged, threaded (FNPT) and socket weld type connection variants further integrated with a perforated mesh chamber.

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Y And Basket Strainers

Y Strainer 1 1/2 Inch

Y Strainer Pvc 1 Inch

Basket Strainers

Y Strainers

YS Series Y-strainer, 4 Inch

Y Strainer 1 1/4 Inch

Y Strainer 1 Inch

Y Strainer 2 Inch

Y Strainer Fnpt Bronze

Y Strainer Pvc Inch

Y Strainer

Y Strainer, Cast Iron Body

Y Type Strainer

YS Series Y-strainer 1 1/2 Inch

YS Series Y-strainer 1 Inch

YS Series Y-strainer 1/2 Inch

YS Series Y-strainer 2 1/2 Inch

YS Series Y-strainer 2 Inch

YS Series Y-strainer 3/4 Inch

Y Strainer, High Pressure

Y Strainers

Y And Basket Strainers

Frequently Asked Questions

We are here to help!

Looking for a part not listed here?

Explore More

Select your cookie preferences

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Y And Basket Strainers

Y And Basket Strainers

Frequently Asked Questions

How to maintain Y and basket strainers?

What standards do Mueller basket strainers comply with?

How to install these Y-type strainers?

How can we replace the self-aligning screen of these Y-type strainers?

We are here to help!

Looking for a part not listed here?

Explore More