Upright Sump Pumps

Filter
DAYTON -

Upright Sump Pumps

Dayton upright sump pumps are used to pump out the collected water in basement of the commercial or residential spaces with no water sewage. They are made from stainless steel for durability & corrosion resistance and are ideal for use in confined spaces with less surface area. These sump pumps feature automatic thermal protection to stop the pump if the operating temperature exceeds the safe limit and a continuous duty AC motor for producing a maximum power output of 1/2 HP. Choose from a wide range of sump pumps, available in 7 and 9A current ratings on Raptor Supplies.

StyleModelAmps ACBase MaterialBest Efficiency GPM @ HeadDiameterGPM of Water @ 10 Ft. of HeadGPM of Water @ 15 Ft. of HeadGPM of Water @ 20 Ft. of HeadGPM of Water @ 5 Ft. of HeadPrice (inc. VAT)
A5URH87Stainless Steel44 @ 10 Ft.11"4430-54£1,040.00
B5URH77Stainless Steel44 @ 10 Ft.11"4430-54£976.62
C5URH97Stainless Steel44 @ 10 Ft.11"4430-54£1,057.79
D5URJ07-44 @ 10 Ft.11"4430-54£1,211.83
E5URJ27Stainless Steel44 @ 10 Ft.11"4430-54£1,206.54
F5URJ17Stainless Steel44 @ 10 Ft.11"4430-54£1,210.06
G5URJ59Zinc-Plated Steel60 @ 12 Ft.13"72392103£888.03
H5URJ69Zinc-Plated Steel60 @ 12 Ft.13"72392103£1,315.27
F5URJ39-50 @ 14 Ft.11"58493565£1,222.06
E5URJ49-50 @ 14 Ft.11"58493565£1,050.25
I5URJ79Stainless Steel60 @ 12 Ft.13"72392103£1,835.78
DAYTON -

Non Submersible Sump Pumps

Dayton non-submersible sump pumps are used for applications where sump pump pits are narrow or shallow. These sump pumps feature dual ball bearings to accommodate axial and radial loads in both clockwise & anti-clockwise directions. They are equipped with housing made of ABS / cast iron / cast bronze for electrical insulation, increased stiffness and impact resistance. These non-submersible sump pumps can withstand liquid temperatures up to 140 degrees F, and are available in 1/3 & 1/2 hp variants.

StyleModelAmps ACBase MaterialFloat MaterialGPM of Water @ 10 Ft. of HeadGPM of Water @ 15 Ft. of HeadGPM of Water @ 5 Ft. of HeadHousingHousing MaterialPrice (inc. VAT)
A4KU604Stainless SteelCopper472655Cast IronCast iron£299.10
B4KU624Stainless SteelCopper472655Cast BronzeCast Bronze£374.94
C4KU644PlasticPolyethylene472655ABSABS£172.75
A4KU615.2Stainless SteelCopper583365Cast IronCast iron£339.79
B4KU635.2Stainless SteelCopper583365Cast BronzeCast Bronze£505.74

Upright Sump Pumps

Upright sump pumps or pedestal pumps are used to pump water out of basements or crawl spaces to prevent flooding. Dayton pedestal pumps feature a cast-iron body for efficient heat dissipation rates while draining water from basement sump pits and a motor, mounted above the sump, for easy servicing. These pumps have a long rod, with a float on the end, to turn the switch on and off. Choose from a wide range of these upright sump pumps available in 4, 5.2, 7 and 9 ampere ratings on Raptor Supplies.

We are here to help!

Looking for a part not listed here?