Snap Buttons

Filter
VALCO VALLEY TOOL AND DIE -

Stainless Steel Snap Buttons

StyleModelGaugeHead HeightHead Dia.Round Tubing Inside Dia.Square Tubing Inside Dia.TypeMaterialPrice (inc. VAT)Pkg. Qty.
AII13022 ga.7/25"1/4"0.43" to 0.87"0.41" to 0.87"Single EndStainless Steel£15.455
AII15025 ga.0.37"0.312"0.55" to 1"0.5" to 1"Single EndStainless Steel£17.575
AII13225 ga.0.37"1/4"0.57" to 0.87"0.43" to 0.87"Single EndStainless Steel£39.615
AII18030 ga.0.37"3/8"0.6" to 1.12"0.55" to 1.12"Single EndStainless Steel£17.755
VALCO VALLEY TOOL AND DIE -

Steel Snap Buttons

StyleModelTypeGaugeHead HeightHead Dia.Round Tubing Inside Dia.Square Tubing Inside Dia.MaterialFinishPrice (inc. VAT)Pkg. Qty.
AD150Double End20 ga.0.37"0.312"0.82" to 1.12"0.82" to 1.12"SteelZinc Plated£4.865
AD131Double End18 ga.7/25"1/4"0.62" to 0.87"0.62" to 0.87"SteelZinc Plated£4.625
AD182Double End25 ga.11/25"3/8"1" to 1.87"1" to 1.87"SteelZinc Plated£25.965
AD181Double End25 ga.0.37"3/8"0.87" to 1.87"0.87" to 1.87"SteelZinc Plated£25.965
BE130Dual18 ga.7/25"6/25"0.5" to 0.75"0.44" to 0.75"SteelZinc Plated£28.375
BE140Dual20 ga.0.37"0.302"0.52" to 1"0.52" to 1"SteelZinc Plated£9.005
CA134Single End18 ga.0.39"1/4"0.5" to 1.25"0.42" to 1.25"SteelZinc Plated£22.6810
CA161Single End25 ga.0.37"0.365"0.68" to 1.37"0.52" to 1.37"SteelZinc Plated£9.1110
DB134Single End20 ga.0.39"1/4"0.55" to 1"0.55" to 1"SteelZinc Plated£7.8910
DB150Single End20 ga.0.37"0.312"0.55" to 1"0.45" to 1"SteelZinc Plated£7.5710
DB130Single End18 ga.7/25"1/4"0.45" to 0.8"0.37" to 0.8"SteelZinc Plated£6.9410
DB180Single End25 ga.0.37"3/8"0.62" to 1.12"0.52" to 1.12"SteelZinc Plated£10.1110
CA130Single End18 ga.7/25"1/4"0.45" to 0.87"0.42" to 0.87"SteelZinc Plated£6.7010
CA150Single End20 ga.0.37"0.312"0.59" to 1.25"0.49" to 1.25"SteelZinc Plated£8.0110
CA170Single End25 ga.0.37"0.365"1.25" to 1.75"1.12" to 1.75"SteelZinc Plated£9.5110
CA180Single End25 ga.0.37"3/8"0.7" to 1.37"0.55" to 1.37"SteelZinc Plated£27.3310

Snap Buttons

These snap buttons are widely used in wheelchairs, portable toilets, crutches, electrical transformers, telescoping poles, banner stands, kiosks, fishing equipment, soccer & hockey goals and pop-up tents. They are also used to attach fabric to solid surfaces such as plastic, cardboard or wood.

Frequently Asked Questions

What is a snap button barrel?

It is the stem-like part of the snap button that is riveted into the mating component. It extrudes out of the backside of the button top.

What causes snaps to stop holding?

A snap's stud (bottom) is frequently fastened to a solid surface, such as the side of a boat. It supports the socket (top), which is riveted to the button cap's underside. A taut wire spring that surrounds the stud as it is put on and lifted off, is located inside the socket. Over time, the spring loses strength, leading to the fastener's failure.

How do you stabilise snaps?

For stabilising, a sew-in material such as a non-fusible or woven interfacing, similar-weight cotton fabric or twill tape can be used.

Can you reuse snap buttons?

Do not reuse snap parts as they get damaged. Throw them and start with new parts.

How to replace worn-out snaps?

  • Determine the type and size of the existing snaps.
  • Remove the old socket by drilling off the rivet with a drill from the rolled side of the rivet.
  • Install the new socket with a snap fastener installation tool.

What is the significance of a snap button closure?

A snap closure uses snap fasteners, which are essentially two discs that fit together like snug jigsaw pieces. One disc has a projecting end, and the other is concave.

We are here to help!

Looking for a part not listed here?