Raceway Fitting Accessories - Page 3 | Raptor Supplies United Kingdom

Raceway Fitting Accessories

Filter
COOPER B-LINE -

Upright Network Equipment Rack Top Plate Runway Support Kits

WIREMOLD -

Raceway Fitting for OFR Raceway

StyleModelFunctionHeightItemLengthNumber Of GangsSub-categoryWidthPrice (inc. VAT)
AOFR48-2--Box13"2Boxes7"£271.04
BOFR48-4--Box18"4Boxes12.5"£291.64
COFR10AAllow Power Into Raceway3.5"Raceway Entrance End Fitting4.5"-End Fittings6 15/16"£179.81
DOFR11Make Right Angle Turn1/2"Flat Elbow8 11/16"-Elbows8 11/16"£266.53
BUYERS PRODUCTS -

D-Rings

StyleModelHeightPrice (inc. VAT)
AB523.5"£51.22
BB514"£52.31
SUPER-STRUT -

Track Support

StyleModelDepth
ATS272HDG1-5/8"
RFQ
ATS-2721-5/8"
RFQ
ATS273HDG3-1/2"
RFQ
ATS2733-1/2"
RFQ
SUPER-STRUT -

Raceway Joiner Set

StyleModelFinish
AB822-
RFQ
AA-822-EG-
RFQ
AB802-
RFQ
AA802-
RFQ
AA822-
RFQ
AA802EGElectro-Galvanized
RFQ
AE802Gold Galvanized
RFQ
HUBBELL WIRING DEVICE-KELLEMS -

Super Base Track Raceway Fittings & Accessories

Hubbell Wiring Device-Kellems Super Base-Track raceway fittings are used for covering open enclosures, mounting raceways and offering wiring solutions. Ceiling raceway adapters are used to connect & extend raceway pieces and discreetly route cables. They are PVC constructed for abrasion resistance and a clean finish. Choose from a wide range of fittings like adapters, caps, elbows, boxes and tees.
Raptor Supplies also offers Hubbell Wiring Device-Kellems Premise-Trak raceway fittingsincluding fixture boxes having 1 or 2 gangs.

StyleModelHeightItemLengthSub-categoryWidthPrice (inc. VAT)
APS3WC-Wire Clip-Clips-£2.60
BPS3CACF6.29"Conduit Adapter/Ceiling Fitting6.93"Adapters4.32"£51.32
CPS3EC6.88"End Cap Fitting2.06"Caps1.5"£18.40
DPS3EE6.93"External Elbow Cover Only6.81"Elbows-£27.03
EPS3EEBC6.93"External Elbow Base, And Cover6.81"Elbows-£36.70
FPS3IEBC6.93"Internal Elbow Base And Cover4.36"Elbows4.36"£35.06
GPS3FCIB6.95"Full Capacity Box 1 Gang4.38"Boxes3.46"£33.54
HPS3IND6.95"Inline Box 3 Gang7"Boxes2.28"£29.88
IPS3TCBC9.68"Tee Fitting Base And Cover10"Tees3.3"£58.04
JPS3FEBC9.74"Flat Elbow Base And Cover9.85"Elbows2.08"£58.04
HUBBELL WIRING DEVICE-KELLEMS -

Lan-Trak Raceway Fittings & Accessories

Hubbell Wiring Device-Kellems Lan-Trak raceway fittings are used for installation of new raceways and wiring. These fittings feature PVC construction for abrasion resistance, light weight, mechanical strength and toughness. Caps are used to close off open raceway ends and provide a professional finish. Mountings facilitate easy installation on walls. Elbows, covers, tees and adapters are also available on Raptor Supplies.

StyleModelHeightItemLengthSub-categoryWidthPrice (inc. VAT)
APL1MC-Mounting Clip-Clips-£2.62
BPL1SC1.12"Splice Cover1.55"Covers1.11"£2.48
CPL1EC1.39"End Cap1.04"Caps1"£2.69
DPL1EEBC1.57"External Elbow Base And Cover5.06"Elbows-£10.67
EPL1IEBC1.57"Internal Elbow Base And Cover2.51"Elbows2.51"£9.45
FPLP1CACF3.9"Conduit Adapter/Ceiling Fitting2.29"Adapters3.31"£12.29
GPL1TCBC3.15"Tee Fitting Base And Cover4.75"Tees1.11"£9.76
HPL1FEBC3.19"Flat Elbow Base And Cover3.19"Elbows1.11"£9.45
WIREMOLD -

Raceway Fitting for 500 and 700 Raceways

StyleModelHeightItemLengthMaterialRaceway TypeSub-categoryWidthPrice (inc. VAT)
A5701-Coupling2"Steel500/700 SeriesCouplings-£1.20
BV5703-Supporting Clip2.5"Steel500/700 SeriesClips-£1.13
CV5748S0.937"Shallow Switch and Receptacle Box4.62"Steel-Boxes2.87"£13.88
DV57381"Fixture Box-Steel-Boxes4.75 Dia.£27.69
EV5738AF1"Round Fan Box-Steel-Boxes5.5 Dia.£28.63
FV57471.37"Shallow Device Box4.62"Steel-Boxes2.87"£14.28
GV57411.37"Shallow Device Box4.62"Steel-Boxes2.81"£18.50
FV57481.75"Deep Device Box4.62"Steel-Boxes2.87"£18.41
HV5748-21.75"Raceway Two Gang Box4.75"2 Piece MetallicSingle ChannelBoxes4.75"£30.43
IV57152.5"Tee Fitting2.5"Steel-Tees0.87"£10.73
JV5744S2.25"Deep Switch and Receptacle Box4.62"Steel-Boxes2.87"£37.15
KV24442.87"Single-gang Extra Deep Device Box4.62"Steel-Boxes2.75"£45.99
LV57354.75"Distribution Box1.375"Steel500/700 SeriesBoxes4.75"£30.53
HUBBELL WIRING DEVICE-KELLEMS -

Metal Raceway Entrance / Conduit Connectors

Hubbell Wiring Device-Kellems raceway connectors are used to connect raceways carrying electrical wirings to panels or conduits in commercial and industrial applications. They have steel construction to provide strength and durability. These connectors provide press-fit mounting for a secure connection. The entrance connectors have one, 3/4 inch knockout for panel or conduit connection and come with one, 3/4 inch chase nipple and locknut, whereas the conduit connectors come with 0.5 inch male or 0.75 inch female holes for connecting wirings.

StyleModelColorConnector TypeHole Dia.ItemLengthPrice (inc. VAT)
AHBL5782AGraySteel0.75"Raceway Conduit Connector1.75"£28.66
BHBL5782CGraySteel0.5"Raceway Conduit Connector1.75"£8.34
CHBL5786AIVAIvory0.750" KO0.75"Raceway Entrance Connector3.89"£23.68
WIREMOLD -

Raceway Fitting for PN05 Raceway

StyleModelItemLengthSub-categoryWidthPrice (inc. VAT)
APN05F19V90 Degrees External Elbow3.125"Elbows1.12"£5.08
BPN05F18V90 Degrees External Elbow1.62"Elbows1.12"£3.53
CPN05F11V90 Degrees Flat Elbow2.93"Elbows1.12"£3.40
DPN05F20VBlank End Fitting0.687"End Fittings1.12"£3.55
EPN05F06VCover Clip1"Clips1.12"£2.83
FPN05F86VDrop Ceiling Connector4.37"Connectors1.31"£10.60
GPN05F17VInternal Elbow2.125"Elbows1.12"£3.53
HPN05F15VTee Fitting4.75"Tees2.93"£5.25
HUBBELL WIRING DEVICE-KELLEMS -

HBL500 Series Raceway Accessories

Hubbell Wiring Device-Kellems HBL500 Series raceway accessories are used for mounting & covering HBL500 fittings & raceways. These accessories feature steel construction for enhanced durability over PVC and better impact resistance. The mounting straps provide easy installation of raceways on walls, panels, workbenches & cabinets. Choose from a wide range of raceway accessories, including covers and elbows.
Raptor Supplies also offers Hubbell Wiring Device-Kellems HBL500 Series raceway fittingssuch as enclosure boxes for covering switches & receptacles.

StyleModelHeightItemLengthSub-categoryWidthPrice (inc. VAT)
AHBL504IV-Raceway Mounting Strap0.5"Straps0.58"£0.80
BHBL506IV0.8"Raceway Connection Cover-Covers0.6"£1.04
CHBL518IV0.58"Raceway External Elbow2.59"Elbows-£4.57
DHBL517IV0.58"Raceway Internal Flat Elbow3.33"Elbows-£4.98
EHBL511IV2.68"Raceway 90 Degree Flat Elbow2.68"Elbows0.61"£3.88
BUYERS PRODUCTS -

Triple Oval Light Box

StyleModelMaterialPrice (inc. VAT)
ALB3253ALDTAlum£109.42
BLB3253SSTSST£136.73
HUBBELL WIRING DEVICE-KELLEMS -

HBL750 Series Raceway Accessories

Hubbell Wiring Device-Kellems HBL750 Series raceway accessories are used for mounting & covering HBL750 fittings & raceways. These accessories feature steel construction for enhanced durability over PVC and better impact resistance. The mounting straps provide easy installation of raceways on walls, panels, workbenches & cabinets. Connection covers are installed over the joining point of two raceways for providing a clean finish. Choose from a wide range of raceway accessories, including bushing and elbows.

StyleModelHeightItemLengthPrice (inc. VAT)
AHBL717IVA0.9"Raceway Internal Elbow3.33"£5.89
BHBL711IVA2.68"Raceway 90 Degree Flat Elbow2.68"£4.17
HUBBELL WIRING DEVICE-KELLEMS -

Wall Track Raceway Fittings & Accessories

Hubbell Wiring Device-Kellems Wall-Trak raceway fittings are used for covering open enclosures, mounting raceways and wiring solutions. They are made of PVC for abrasion resistance and a clean finish. Ceiling raceway adapters are used to connect & extend raceway pieces and discreetly route cables. Choose from a wide range of fittings like caps, covers and tees. Raptor Supplies also offers Hubbell Wiring Device-Kellems Super Base-Track raceway fittingsincluding caps, elbows, boxes and tees.

StyleModelHeightItemLengthSub-categoryWidthPrice (inc. VAT)
APW2SC1.11"Splice Cover1.11"Covers2.3"£2.69
BPW2EC2.14"End Cap1.04"Caps1"£4.47
CPW2IEBC2.32"Internal Elbow Base And Cover2.83"Elbows2.83"£12.71
DPW2EEBC2.32"External Elbow Base And Cover5"Elbows-£11.04
EPW2TCBC3.91"Tee Fitting Base And Cover5.42"Tees1.9"£15.04
FPW2FEBC3.94"Flat Elbow Base And Cover3.94"Elbows1.11"£12.71
GPW2CACF4.18"Conduit Adapter/Ceiling Fitting4.2"Adapters3.32"£15.45
WIREMOLD -

Raceway Fitting for 1500 Raceway

StyleModelColorHeightItemLengthSub-categoryWidthPrice (inc. VAT)
A1585Gray1.66"Combination Connector3.25"Connectors1.62"£21.04
B1500WCGray45139"Wire Clip0.37"Clips1"£1.95
C1517Ivory0.343"Internal Elbow2.5"Elbows1.5"£16.60
D1511Stainless Steel0.343"90 Degrees Flat Elbow2.75"Elbows1.5"£16.91
WIREMOLD -

Raceway Fitting for V2400, 4000, 40N2, 60N2 and Wall Source Box Raceways

StyleModelItemPrice (inc. VAT)
A5507DRaceway Duplex Receptacle Cover£6.70
B5507RRaceway GFCI/Decora/Styleline Cover£7.28
C5507RJRaceway RJ11/RJ45 Cover£6.19
D5507SWRaceway Toggle Switch Cover£6.72
WIREMOLD -

Raceway Fitting for 60N2 Raceway

StyleModelColorPrice (inc. VAT)
A40N2C08VIvory£43.51
RFQ
B40N2C08WHWhite£43.95
RFQ
WIREMOLD -

Raceway Fitting for 2400 Raceway

StyleModelHeightItemLengthMaterialSub-categoryWidthPrice (inc. VAT)
A24010.5"Coupling2"SteelCouplings1.9"£1.59
BV2400C0.25"Cover60"SteelCovers1.9"£15.60
RFQ
C2400WC0.25"Wire Clip1"PlasticClips1.9"£1.33
DV2410B0.75"Blank End Fitting1.25"SteelEnd Fittings1.9"£2.63
EV2411DFO0.87"Full Capacity Flat Elbow5.5"SteelElbows1.9"£42.47
FV24061"Connection Cover2"SteelCovers1.5"£2.91
GV2417M1.75"Internal Elbow1.75"SteelElbows1.9"£14.34
HV2418M1.75"External Elbow3"SteelElbows1.9"£26.76
IV24481.75"Single-gang Device Box4.62"SteelBoxes2.75"£26.03
JV2448-21.75"Two Gang Raceway Box4.75"SteelBoxes4.75"£52.91
KV2418DFO1.87"Full Capacity External Elbow6.5"SteelElbows6.5"£47.14
LV2444-22.75"Two-gang Extra Deep Device Box4.75"SteelBoxes4.75"£45.89
MV2444D2.87"One-gang Divided Device Box4.62"SteelBoxes2.75"£44.32
NV2411M3.94"90 Degrees Flat Elbow3.94"SteelElbows1.75"£16.30
OV2417DFO4"Full Capacity Internal Elbow4"SteelElbows1.87"£42.36
PV2444D-2A4.75"Two-gang Divided Device Box2.75"SteelBoxes4.75"£80.93
WIREMOLD -

Raceway Fitting for PN10 Raceway

StyleModelColorItemLengthSub-categoryWidthPrice (inc. VAT)
APN10F86VBlank End FittingConnector4.37"End Fittings2.5"£6.79
BPN10F21VIvoryEntrance End Fitting3.87"End Fittings0.88"£9.56
CPN10F11VIvory90 Degrees Flat Elbow3.687"Elbows1.687"£3.59
DPN10F15VIvoryTee Fitting5.31"Tees3.68"£5.71
EPN10F17VIvoryInternal Elbow2.125"Elbows1.687"£3.41
FPN10F18VIvory90 Degrees External Elbow1.625"Elbows1.687"£3.93
GPN10F06VIvoryCover Clip1"Clips1.687"£6.56
HPN10F19VIvory90 Degrees External Elbow3.375"Elbows1.687"£5.21
IPN10F20VIvoryBlank End Fitting0.687"End Fittings1.687"£3.90
PANDUIT -

For Use With Pan-Way(R) T-45 or LD Profile Raceways

StyleModelColorItemLengthWidthPrice (inc. VAT)
AJBP2SIWInternational WhiteRaceway Two Gang Divided Junction Box5.05"5.05"£23.32
BJBP2FSIWInternational WhiteRaceway Two Gang Fast-Snap Box6.14"5"£22.56
CJBX3510IW-AOff WhiteRaceway Single Gang Junction Box5"3.26"£10.55
BUYERS PRODUCTS -

Fender Mount

StyleModelColorMaterialPrice (inc. VAT)Pkg. Qty.
A8591005BlackPoly£69.962
B8591001GraySST£373.321
1234...9

We are here to help!

Looking for a part not listed here?