Pneumatic Control Accessories

Texas Pneumatic Tools retainer buffers reduce damage in the buffer tube, under spring tension. These units feature 17-4 stainless steel bar stock, heat treated to H900 hardness for reliable performance in harsh working conditions.

Texas Pneumatic Tools exhaust or muffler deflectors are shields installed at exit ports of the pipes to direct engine exhaust fumes towards particular directions. They include single-piece housing with outlet walls for outlet apertures, flanges to define inlet apertures and intermediate walls to interconnect both.

Texas Pneumatic Tools jumbo lower sleeves replace worn out / damaged lower sleeves for rivet buster tools used for demolition applications. They feature one piece design for impact strength and selected models have machined, heavy duty alloy steel construction for preventing oxidation against moisture & abrasive conditions. These sleeves fit jumbo size rivet busters for precise fitting.

Texas Pneumatic Tools jumbo back out punches are used for driving fasteners such as dowels & nails, making a hole, or forming an impression or indentation on the tip on workpieces. These punches are suitable for structural steel work and have a long piston stroke to deliver a powerful blow for concrete removal and bridge demolition.

Texas Pneumatic Tools manifold bodies are used to channel compressed air supply from a single hose into multiple outlets for operating multiple air tools with the same supply. They let the operator control the amount of fluid flowing between the components of the hydraulic machinery. Various manifolds can be combined into a single body for desired air regulation.

Texas Pneumatic Tools plunger springs are designed to close valve openings and prevent backflow. They counter the force applied by solenoid coils when current is passed through them. The valve opens if the coil force is greater than the spring recoil and closes when the solenoid force reduces. These springs are ideal for deciding the flow rate of compressed air passing through valves.

Texas Pneumatic Tools packing sets are ideal for positive high pressure sealing, low wear and extended service life to the sand air rammers. Graphite packing sets are highly resistant sealants that offer excellent heat conductivity, chemical inertness and resistance against extrusion. These packing sets are ideal for use in pharmaceutical, chemical, mining, paper and food industries.

Texas Pneumatic Tools sand rammers are designed to compress and compact soil for uniformity. The brand's packing assemblies provide sealing in sand rammers to prevent dust and dirt from entering inside. Choose from a wide range of front, middle and rear packings on Raptor Supplies.

Texas Pneumatic Tools stroke pistons are ideal replacements for damaged / worn out pistons in chipping hammers used for demolition and maintenance applications. They feature one piece design for impact strength and selected models feature steel construction for minimising wear against high temperatures and friction.

Texas Pneumatic Tools jumbo upper sleeves are suitable replacements for damaged sleeves in rivet buster tools used for demolition applications. They feature one piece design for impact strength and selected models feature steel construction for high abrasion resistance in corrosive environments.

Texas Pneumatic Tools back-out punches drive out rivets, bolts & pins in electric and plumbing applications. They are suitable for operations where precise & smooth holes are needed and feature heat treated heads for high tensile strength. These punches are ideal for 5/8, 3/4, 7/8 or 1 inch rivet diameters, available in overall sizes of 5/8 and 9 inches.
Raptor Supplies also offers Texas Pneumatic Tools Jumbo Back Out Punches, ideal for 3/4, 7/8, 1/2 and 1 inch rivets.

Texas Pneumatic Tools oil felts are used as oil or grease seals for retaining lubrication and preventing dirt or dust from entering the bearing. These oil felts are made of NBR to offer excellent tensile strength, improved finish & enhanced waterproofing. They feature wicking and oil absorption properties for fine filtring & resilience.

Texas Pneumatic Tools ground clamps are used for connecting ground cables to workpieces. These clamps are either connected directly to the fixture or the table upon which the workpiece is positioned. They are ideal for soldering, welding, assembling, marking-off and pipe installation.

Texas Pneumatic Tools lever pins are used with compatible levers for moving or lifting objects with less force.