TEXAS PNEUMATIC TOOLS Pneumatic Control Accessories

Texas Pneumatic Tools absorber rings are used with cushions and springs to absorb and dampen shock impulses. They also reduce noise and vibration.

Texas Pneumatic Tools stroke pistons are ideal replacements for damaged / worn out pistons in chipping hammers used for demolition and maintenance applications. They feature one piece design for impact strength and selected models feature steel construction for minimising wear against high temperatures and friction.

Texas Pneumatic Tools plunger springs are designed to close valve openings and prevent backflow. They counter the force applied by solenoid coils when current is passed through them. The valve opens if the coil force is greater than the spring recoil and closes when the solenoid force reduces. These springs are ideal for deciding the flow rate of compressed air passing through valves.

Texas Pneumatic Tools pistons are used to replace damaged or old pistons to maintain the efficiency of compressed-air tools. These pistons are powered by compressed air and can handle high-speed cycles for powering air tools and their attachment heads.

Texas Pneumatic Tools lever pins are used with compatible levers for moving or lifting objects with less force.

Texas Pneumatic Tools levers are used for moving or lifting objects, as well as push against objects without actually moving them. They exert a higher force over a small distance at one end by exerting smaller force over a long distance at the other end.

Texas Pneumatic Tools exhaust or muffler deflectors are shields installed at exit ports of the pipes to direct engine exhaust fumes towards particular directions. They include single-piece housing with outlet walls for outlet apertures, flanges to define inlet apertures and intermediate walls to interconnect both.

Texas Pneumatic Tools sand rammers are designed to compress and compact soil for uniformity. The brand's packing assemblies provide sealing in sand rammers to prevent dust and dirt from entering inside. Choose from a wide range of front, middle and rear packings on Raptor Supplies.

Texas Pneumatic Tools rivet busters are compressed air powered pneumatic tools, used to cut & drive metal rivets by breaking the concrete surface. They are ideal for road & bridge repair work, railroad car repair, metal tank demolition and mixing tank cleaning. Rivet buster pistons are made of steel and are used to drive & produce oscillating motion of the hammer. Rivet busters have positive retention of the piston to prevent injuries and a built-in barrel bridge for safety.

Texas Pneumatic Tools offers throttle valve springs that are used to throttle the valve to a closed position. They aid in controlling the air flowing into the engine in an air intake system.

Texas Pneumatic Tools jumbo upper sleeves are suitable replacements for damaged sleeves in rivet buster tools used for demolition applications. They feature one piece design for impact strength and selected models feature steel construction for high abrasion resistance in corrosive environments.

Texas Pneumatic Tools back-out punches drive out rivets, bolts & pins in electric and plumbing applications. They are suitable for operations where precise & smooth holes are needed and feature heat treated heads for high tensile strength. These punches are ideal for 5/8, 3/4, 7/8 or 1 inch rivet diameters, available in overall sizes of 5/8 and 9 inches.
Raptor Supplies also offers Texas Pneumatic Tools Jumbo Back Out Punches, ideal for 3/4, 7/8, 1/2 and 1 inch rivets.

Texas Pneumatic Tools jumbo back out punches are used for driving fasteners such as dowels & nails, making a hole, or forming an impression or indentation on the tip on workpieces. These punches are suitable for structural steel work and have a long piston stroke to deliver a powerful blow for concrete removal and bridge demolition.

Texas Pneumatic Tools ground clamps are used for connecting ground cables to workpieces. These clamps are either connected directly to the fixture or the table upon which the workpiece is positioned. They are ideal for soldering, welding, assembling, marking-off and pipe installation.

Texas Pneumatic Tools rivet buster lower sleeves protect percussion tools from the adverse effects of vibrations. Selected models are available in a split design for use with standard or jumbo chisels with sizes beyond 24 inches that are, otherwise, unable to snap in through the big-front retainer opening.

Texas Pneumatic Tools packing sets are ideal for positive high pressure sealing, low wear and extended service life to the sand air rammers. Graphite packing sets are highly resistant sealants that offer excellent heat conductivity, chemical inertness and resistance against extrusion. These packing sets are ideal for use in pharmaceutical, chemical, mining, paper and food industries.