Hydraulic Quick Couplers

The H Series couplings by Snap-Tite are widely used in general-purpose hydraulic and pneumatic applications where either single or double shut-off valving is required. These Snap-Tite couplings are made of high-pressure components, and are therefore ideal for use with oil and gas. They feature a self-locking valve sleeve that provides protection against accidental disconnection. Snap-Tite quick couplings are available in various corrosion-resistant materials with options in size and end configuration.

Parker 9200 Series hydraulic quick couplers allow zero pressure connection / disconnection with their compatible nipples, when both components (or either one of them) are under pressure. These galvanised steel units are integrated with a lever actuator that locks the valves in "open" position to prevent from unwanted pressure surges or in the "closed position" while lines are under pressure. The right & left handed operation with color coded grips (red / yellow) allow easy identification of raise and lower pressure lines. They further feature breakaway design, ensuring quick disconnection of the coupling in case of a breakaway situation that might lead to mass fluid spillage or hose burst. Choose from a wide range of these hydraulic quick couplers, available in NPTF and UNF connection types.

Snap-Tite H Series coupler nipples are ideal for high-pressure operation in agricultural and industrial applications. These nipples ensure superior flow with minimum pressure drop and are ideal for applications where either single or double shut-off valving is required. These Snap-Tite fittings can be quickly attached or detached and have a tapered thread connection to create a fluid-tight seal which, in turn, increases the productivity of hydraulic systems. The company's H Series couplings are available in different materials, sizes and end configurations.

Parker FH Series couplers are ideal for connecting with the FH Series nipples under push-to-connect operation for hydraulic applications in high pressure test equipment, rescue equipment and hydraulic crimpers, cutters, benders, clamps & wedges. They meet the Hydraulic Tool Manufacturer's Association (HTMA) and ISO 16028 standards by not connecting with lower pressure quick couplings and have easily identifiable red finish on the sleeve for indicating high pressure. These non-spill couplings with flush face valves reduce spillage and prevent entry of air while connecting or disconnecting fluid lines. They have steel construction with zinc & clear trivalent chromate plating and a nitrile seal for corrosion resistance and preventing entry of contaminants. These couplers are integrated with sleeve lock guards for preventing accidental disconnections. Choose from a wide range of these 3/8 inch sized couplers, available in male and female threaded NPTF connections.