What general safety instructions should be followed while operating Baldor motors?

Avoid overtightening of belts as this may cause shaft breakage or premature bearing failure.Allow clearance for end to end shaft movement.Direct coupled machines should be precisely aligned and the shaft should rotate smoothly without any binding.

What are the factors to consider while purchasing a motor?

A current powers the motor, but excessive current can damage the motor as well. For DC motors, stall and operating current are important. Stall current applies sufficient torque for the motor to run either at stall speed or 0 RPM. This is the maximum amount of current the motor can draw. Overcurrent may lead to a rise in heat, resulting in wire melting.Voltage is important as it keeps net current flowing in a single direction and overcomes back current. The higher the voltage, the higher the torque. Make sure that the recommended voltage is applied. If you apply very low voltage, the motor will not work, while applying too much voltage can lead to a short-circuit and consequently result in power loss or complete failure.Operating torque is the amount of torque produced by the motor, while stall torque generates when you apply power from stall speed. The user must look at the required operating torque, but some applications require knowing how far to push the motor. For example, with a wheeled robot, good torque means good acceleration, but you should make sure the stall torque is high enough to lift the weight of the robot. In this case, torque is more important than speed.Velocity or speed can be complex in regards to motors. Generally, a motor runs smoothly & efficiently at the highest speed, but it is not always possible if gearing is needed. Adding gears will reduce the motor efficiency, so reduce both the speed and torque simultaneously.

Farm Duty Motors

Filter

Farm duty motors work well in harsh & rugged operations and are ideal for agricultural settings. They feature enclosures that protect them from moisture. These motors are suitable for...Read more

BALDOR MOTOR -

Extra High Torque Farm Duty Motors, Single Phase, Foot Mounted

Style	Model	Frame	Power Factor	Amps	HP	Insulation	No-load Current	Output	Break-down Torque	Price (inc. VAT)
A	FDL3611TM	182T	67	28/14	2	B	8.5 Amps	2	23 LB-FT	£1,892.29
A	FDL3611M	184	73	24.8/12.4	2	B	8.55 Amps	2	16 LB-FT	£1,941.46
B	FDL3610M	184	76	15.5	3	F	10.7 Amps	3	32 LB-FT	£2,304.80
B	FDL3610TM	184T	76	15.5	3	F	10.7 Amps	3	32 LB-FT	£2,249.25
C	FDL3612TM	184T	88	23	5	F	10 Amps	5	43 LB-FT	£2,360.35
B	FDL3619TM	184T	90	13.2	3	F	6.2 Amps	3	22 LB-FT	£1,811.24
D	FDL3732M	213	97	30	7.5	F	-	7.5	-	£3,337.45
D	FDL3733TM	213T	97	30	7.5	F	-	7.5	-	£3,072.46
D	FDL3731M	215	93	20.5	5	F	7.48 Amps	5	50 LB-FT	£2,900.35
E	FDL3737TM	215T	96	39	10	F	10 Amps	10	107.2 LB-FT	£3,594.25
E	FDL3712TM	215T	94	40	10	F	7 Amps	10	90 LB-FT	£3,376.61

BALDOR MOTOR -

Extra High Torque Farm Duty Motors, C-Face Footless, F-2 Single Phase

Style	Model	Overall Length	Service Factor	Amps	Power Factor	Frame	Speed	Full Load Amps	Motor Type	Price (inc. VAT)
A	VFDFL3516TM	14.17"	1.15	8.9 A @ 208 V 7.9 A @ 230 V	99	145TC	1,740 rpm	7.9 A	3535LC	£1,946.01
A	VFDFL3612TM	18.04"	1	23.0 A	88	184TC	1,725 rpm	23.0 A	3646LC	£3,219.07
A	VFDFL3610TM	18.05"	1	15.5 A	76	184TC	1,750 rpm	15.5 A	3640LC	£2,636.27

MARATHON MOTORS -

Crop Dryer Motors, Single Phase, Dripproof/Air Over, Rigid Base

Style	Model	HP	Nominal Efficiency	Frame	Length Less Shaft	Motor Design	Motor Thermal Protection	Nameplate RPM	Full Load Amps	Price (inc. VAT)
A	145TBDR5309	3	81.5%	145TZ	10 11/16"	Capacitor-Start/Run	Auto	3510	13	£889.36
B	184TCDW7615	5	78.5%	184TZ	12.875"	Capacitor-Start	T-stat	3535	27.2	£1,075.71

LEESON -

Farm Duty AC Motors

Style	Model	Price (inc. VAT)
A	117883.00	£609.20
B	117888.00	£451.27
C	117884.00	£640.80
D	117889.00	£533.36
E	119783.00	£922.10

BALDOR MOTOR -

Farm Duty Motors, Single Phase, Grain Dryer/Vane Axial Fan

Style	Model	Type	Output	Amps	Enclosure	Frame	HP	Insulation	No-load Current	Price (inc. VAT)
A	UCLE3145	-	-	-	-	-	4-1/2 hp / 3 hp	-	-	£1,655.52
A	UCLE153	3532LC	1.5-3	12.5	TEAO	145TZ	1.5-3	F	2.6 Amps	£1,616.37
B	UCL3145	3540LC	3-4.5	14.3-20	OLC	145TZ	3-4.5	F	-	£1,563.55
B	UCL345	3634L	3-4.5	22	Open	182Z	3-4.5	F	-	£1,628.20
B	UCL570	3646L	5-7	35	OPAO	182TZ	5-7	F	17.7 Amps	£1,924.16
A	UCLE570	3646LC	5-7	20.5-27.7	TEAO	182TZ	5-7	H	6 Amps	£2,015.22
B	UCL710	3646LC	7.5-10	31-42	Open	182TZ	7.5-10	F	-	£2,063.48
A	UCLE7510	3646LC	7.5-10	38	TEAO	182TZ	7.5-10	F	6.2 Amps	£2,179.13
B	UCL7510	3729L	7.5-10.5 AIR OV	37-46	OPAO	215Z	7.5-10.5	F	25.7 Amps	£2,611.68
B	UCL1015	3744LC	10-15	44-55	Open	215Z	10-15	F	-	£3,346.56
A	UCLE1015	3750LC	10-15	46-61	TEAO	215Z	10-15	F	17.3 Amps	£3,376.61

BALDOR MOTOR -

Super-E Farm Duty Motors, Three Phase

Style	Model	Power Factor	Motor Type	Amps	Frame	Frame Material	Frame Size	Full Load Amps	HP	Price (inc. VAT)
A	FDEM3615T	-	-	-	-	Cast Iron	184T	13.9-13.4/6.7	5 hp	£1,454.22
A	FDEM3558	-	-	-	-	Cast Iron	56	5.8/2.9	2 hp	£1,166.77
A	FDEM4103T	-	-	-	-	Cast Iron	284T	60/30	25 hp	£5,739.85
A	FDEM3558T	-	-	-	-	Cast Iron	145T	5.8/2.9	2 hp	£1,201.70
A	FDEM2334T	-	-	-	-	Cast Iron	256T	48/24	20 hp	£4,391.29
A	FDEM3714T	-	-	-	-	Cast Iron	215T	25.4-24/12	10 hp	£2,357.72
A	FDEM3710T	-	-	-	-	Cast Iron	213T	18.8/9.4	7-1/2 hp	£2,092.67
A	FDEM3611T	-	-	-	-	Cast Iron	182T	9-8.4/4.2	3 hp	£1,331.54
A	FDEM4104T	-	-	-	-	Cast Iron	286T	76/38	30 hp	£6,794.68
A	FDEM2333T	-	-	-	-	Cast Iron	254T	36.2/18.1	15 hp	£3,632.85
A	FDEM4110T	-	-	-	-	Cast Iron	324T	96/48	40 hp	£8,938.40
A	FDEM3546T	71	3520M	3.1 A @ 208 V 3.0 A @ 230 V 1.5 A @ 460 V	143T	Steel	-	1.5 A	-	£1,128.27
A	FDEM3546	71	3520M	3.1 A @ 208 V 3.0 A @ 230 V 1.5 A @ 460 V	56	Steel	-	1.5 A	-	£1,113.04
A	FDEM3554	72	3526M	4.6 A @ 208 V 4.4 A @ 230 V 2.2 A @ 460 V	56	Steel	-	2.2 A	-	£1,138.11
A	FDEM3554T	72	3526M	4.6 A @ 208 V 4.4 A @ 230 V 2.2 A @ 460 V	145T	Steel	-	2.2 A	-	£1,160.51
A	FDEM3709T	84	3728M	19.4 A @ 208 V 18.0 A @ 230 V 9.0 A @ 460 V	213T	Steel	-	9.0 A	-	£2,307.58
A	FDEM4115T	85	1272M	128.0 A @ 208 V 116.0 A @ 230 V 58.0 A @ 460 V	326T	Iron	-	58.0 A	-	£9,752.36
A	FDEM4316T	87	A36068M	169.0 A @ 230 V 84.9 A @ 460 V	365T	Iron	-	84.9 A	-	£16,325.88
A	FDEM3711T	87	3728M	24.9 A @ 208 V 23.6 A @ 230 V 11.8 A @ 460 V	215T	Steel	-	11.8 A	-	£2,338.92
A	FDEM4107T	87	0946M	62.0 A @ 208 V 58.0 A @ 230 V 29.0 A @ 460 V	284TS	Iron	-	29.0 A	-	£5,664.62
A	FDEM4314T	87	A3662M	135.0 A @ 230 V 67.8 A @ 460 V	364T	Iron	-	67.8 A	-	£14,003.06
A	FDEM4400T	87	A40064M	224.0 A @ 230 V 112.0 A @ 460 V	405T	Iron	-	112.0 A	-	£20,324.96
A	FDEM2394T	87	0930M	38.0 A @ 208 V 35.0 A @ 230 V 17.5 A @ 460 V	254T	Iron	-	17.5 A	-	£3,963.27
A	FDEM4109T	88	1240M	100.0 A @ 208 V 92.0 A @ 230 V 46.0 A @ 460 V	324TS	Iron	-	46.0 A	-	£9,253.59
A	FDEM4106T	89	0936M	50.0 A @ 208 V 46.0 A @ 230 V 23.0 A @ 460 V	256T	Iron	-	23.0 A	-	£4,345.62

BALDOR MOTOR -

Dairy/ Vaccum Fan Farm Duty Motors, Single Phase, Foot Mounted

Style	Model	No-load Current	Revision	Amps	Output	Power Factor	Break-down Torque	RPM	Temp. Rise	Price (inc. VAT)
A	DEL3737TM	10.5 Amps	G	39	10	96	111 LB-FT	1760	85 Deg C	£5,685.05
A	DEL3733TM	10.8 Amps	AP	28	7.5	98	58 LB-FT	1725	88 Deg C	£4,654.22

BALDOR MOTOR -

Direct Drive Fan HVAC Motors, Resillent Base, Single Phase

Style	Model	Power Factor	RPM	Amps	Revision	Frame	Type	HP	Number of Poles	Price (inc. VAT)
A	CHC3413A	62	1700	4.8/2.4	W	48Z	3414C	.25	04	£598.28
A	CHC3417A	67	1100	5.6/2.8	-	48Z	3421C	.33	06	£814.10
A	CHC3416A	69	1700	5.6/2.8	Z	48Z	3418C	.33	04	£651.10
A	CHC3525A	92	1100	5.2/2.6	B	56Z	3528C	.5	06	£934.30

BALDOR MOTOR -

Farm Duty Motors, C-Face, Foot Mounted, Single Phase

Style	Model	Voltage	Output	Amps	Break-down Torque	Frame	HP	Insulation	No-load Current	Price (inc. VAT)
A	CFDL3514M	115/208-230	1.5	12.4/6.8-6.2	12.1 LB-FT	56CH	1.5	B	1.76 Amps	£1,535.32
A	CFDL3507M	115/230	.75	8.8/4.4	7 LB-FT	56C	.75	B	3.2 Amps	£1,210.23
B	CFDL3510M	115/230	1	11.8/5.9	7.19 LB-FT	56CH	1	F	3.48 Amps	£1,365.94
B	CFDL3504M	115/230	.5	7.4/3.7	4.13 LB-FT	56C	.5	B	2.8 Amps	£1,041.76

BALDOR MOTOR -

Aeration Fan Farm Duty Motors, Three Phase, Foot Mounted

Style	Model	Type	Voltage	Amps	Frame	HP	Output	Power Factor	Revision	Price (inc. VAT)
A	AFM3528	3413M	230/460	2.6/1.3	56Z	.75	.75	73	AG	£595.48
A	AFM3529	3416M	230/460	3.6/1.8	56Z	1	1	71	AC	£647.41
A	AFM3530	3424M	208-230/460	4.9-4.6/2.3	143TZ	1.5	1.5	74	E	£747.70
A	AFM3532	3528M	208-230/460	8.1-7.6/3.8	145T	3	3	89	Z	£991.26

BALDOR MOTOR -

Extra High Torque Farm Duty Motors, C-Face Footless, Single Phase

Style	Model	HP	Revision	Amps	No-load Current	Output	Power Factor	Break-down Torque	RPM	Price (inc. VAT)
A	VFDL3516TM	2	F	8.6-8.3	1.4 Amps	2	99	14.5 LB-FT	1725	£1,946.01
A	VFDL3610TM	3	Q	15.5	10.7 Amps	3	76	32 LB-FT	1750	£2,636.27
B	VFDL3612TM	5	B	23	10 Amps	5	88	43 LB-FT	1725	£3,219.07

BALDOR MOTOR -

Universal Crop Dryer Farm Duty Motors, Single Phase, PSC

Style	Model	Amps	Frame	HP	Output	Power Factor	Revision	Type	Price (inc. VAT)
A	UCC5700	19.5-29	184TZ	5-7	5-7	97	AA	3634C	£1,724.73
A	UCC7100	28-39	184TZ	7.5-10	7.5-10	95	AA	3640C	£1,895.02
A	UCC10150	41-57	215Z	10-15	10-15	98	AD	3740C	£3,582.41

MARATHON MOTORS -

Extra-High Torque Chore Motors, Farm Duty/Agriculture, Single Phase, TEFC, Rigid Base

Style	Model	Nameplate RPM	Shaft Dia.	Frame	Nominal Efficiency	Overall Length	Full Load Amps	Shaft Length	Voltage	Price (inc. VAT)
A	213TBFW7027	1740	1.125"	213TZ	82.5%	18 5/16"	22.6	3.5"	230	£1,514.89
B	215TBFW7028	1750	1.125"	215TZ	85.5%	21 1/16"	30.5	3.5"	230	£1,652.44
C	182TCFW9061	1760	7/8"	182TZ	74%	14.437"	24/12	2 13/16"	115/230	£980.25

LEESON -

Hatchery And Incubator Fan Motors, Single Phase, TEAO

Style	Model	Type	Motor Thermal Protection	Duty	Frame	Full Load Amps	HP	Insulation Class	kW	Price (inc. VAT)
A	101341.00	PLE?	7AM035A5	Continuous	48Y	2.8 / 1.4	1/4	B	.187	£322.63
B	103878.00	PN	A-A56227-52	AIROVER	48Z	3.25 / 1.65	1/3	F	0.25	-	RFQ

LEESON -

60 Hertz Feed Auger Drive Agricultural Duty Motors, Single Phase, TEFC

Style	Model	Motor Thermal Protection	kW	Assembly	Frame	Full Load Amps	HP	Hz	Insulation Class	Price (inc. VAT)
A	112615.00	CED2797	0.75	LC-48	56	14 / 7	1	60	F	£630.13
B	101119.00	Manual	.56	LO101119	48Y	10.8/5.3-5.4A	3/4	60 Hz	F	£562.83
C	101120.00	Manual	.37	LO101120	48Y	8/4.4-4A	1/2	60 Hz	F	£483.46
D	101159.00	Manual	.246	LO101159	48Y	6.2/3.1A	1/3	60 Hz	B	£446.04

LEESON -

Industry Agricultural Duty Motors, Single Phase, TEFC, C Face Less Base

Style	Model	Full Load Amps	HP	kW	Motor Thermal Protection	Power Factor	Price (inc. VAT)
A	117878.00	6.6 / 3.1-3.3	1/3	0.25	MED4772	60	£441.14
B	117879.00	8.8 / 4.2-4.4	1/2	.37	MED3778	58	-	RFQ
C	117881.00	13.4 / 6.8-6.7	1	.75	CED3706	69.5	£568.56

WORLDWIDE ELECTRIC -

Integral Farm Duty Motors

Style	Model	Price (inc. VAT)
A	FD10-18-215TC	£1,851.38	RFQ
B	FD5-18-184TC	£1,031.80	RFQ
C	FD7.5-18-215T	£1,524.89	RFQ
D	FD7.5-18-215TZ	£1,524.89	RFQ
E	FD10-18-215T	£1,777.33	RFQ
F	FD2-18-145T	£636.55	RFQ
G	FD3-18-184T	£840.03	RFQ
H	FD7.5-18-215TC	£1,588.42	RFQ
I	FD2-18-182T	£705.96	RFQ
J	FD2-18-182TC	£798.61	RFQ
K	FD3-18-184TC	£875.03	RFQ
L	FD5-18-184T	£990.51	RFQ

DAYTON -

Farm Duty AC Motors, Rigid Base Mounting
Dayton farm duty motors are ideal for producing high starting torque in various applications including aeration fans, conveyors, silo unloaders, barn cleaners, compressors and manure pumps. These units have steel construction with green coated finish for strength & durability. These units come equipped with ball bearings for smooth & continuous operation and have totally enclosed fan cooled (TEFC) enclosures for withstanding dusty and rough environments, as well as keeping away moisture. They further include shaft slingers and gasketed conduit boxes, protecting motor components against harsh weather conditions and ingress of contaminants. Choose from an array of these agricultural motors, available in motor power outputs ranging from 1/3 to 10 hp.

Style	Model	Insulation Class	Service Factor	Frame	Motor Design	Motor Mounting Position	Nameplate RPM	Full Load Amps	Shaft Dia.	Price (inc. VAT)
A	6K710	B	1.15	56	Capacitor-Start	All Angle	1725	6.6/3.3	5/8"	£481.52
B	6K311	B	1.15	145T	Capacitor-Start/Run	Horizontal	1725	16.2/8.1	7/8"	£808.59
C	6K719	B	1.15	56	Capacitor-Start	All Angle	1725	11.4/5.7	5/8"	£635.05
D	6K740	B	1.15	56H	Capacitor-Start/Run	All Angle	1725	16.2/8.1	5/8"	£663.49
E	4K090	F	1.00	56HZ	Capacitor-Start/Run	All Angle	1725	20/10	7/8"	£816.82
F	6K714	F	1.15	56	Capacitor-Start	All Angle	1725	9.0/4.5	5/8"	£642.27
G	6K610	F	1.00	184T	Capacitor-Start	Horizontal	1740	14.5	1.125"	£1,716.24
H	6K130	F	1.00	213T	Capacitor-Start/Run	Horizontal	1730	23.0	1.375"	£2,369.97
I	6K970	F	1.00	215T	Capacitor-Start/Run	Horizontal	1730	38.0	1.375"	£3,474.67
J	6K727	F	1.15	56H	Capacitor-Start	All Angle	1725	14.0/7.0	5/8"	£592.93
K	6K969	F	1.00	215T	Capacitor-Start/Run	Horizontal	1740	30.0	1.375"	£2,763.38
L	6K887	F	1.15	182TZ	Capacitor-Start/Run	Horizontal	1750	25.6/12.8	7/8"	£1,641.74
M	6K883	F	1.15	215TZ	Capacitor-Start/Run	Horizontal	1725	29.0	1.125"	£2,364.23
N	6K313	F	1.00	182T	Capacitor-Start	Horizontal	1740	23.6/11.8	1.125"	£1,497.65
O	6K994	F	1.15	143T	Capacitor-Start	All Angle	1725	15.0/7.5	7/8"	£774.32
P	6K886	F	1.15	143T	Capacitor-Start/Run	Horizontal	1725	19.2/10.1	7/8"	£798.66
Q	6K885	F	1.15	215T	Capacitor-Start/Run	Horizontal	1735	41.0	1.375"	£3,398.59
R	6K882	F	1.15	184T	Capacitor-Start/Run	Horizontal	1740	24.0	1.125"	£1,928.41
S	6K881	F	1.15	184T	Capacitor-Start/Run	Horizontal	1760	17.0	1.125"	£2,005.12
T	6K847	F	1.00	184T	Capacitor-Start/Run	Horizontal	1740	22.0	1.125"	£1,535.12
Q	6K884	F	1.15	215TZ	Capacitor-Start/Run	Horizontal	1720	30.8	1.125"	£2,894.18

LEESON -

High Torque Agricultural Duty Motors, Single Phase, TEFC, C Face Less Base

Style	Model	Voltage	Lubrication	Assembly	Frame	Full Load Amps	HP	Insulation Class	kW	Price (inc. VAT)
A	110493.00	115 / 208-230	Polyrex EM	042504	56C	10.8 / 5.4	3/4	B	.56	£518.94
B	110492.00	115 / 208-230	Polyrex EM	042504	56C	8.8 / 4.4	1/2	B	.37	£451.27
C	110494.00	115 / 208-230	Polyrex EM	042504	56C	14 / 7	1	F	.75	£564.08
D	113290.00	208-230 / 115	VERIFY	-	56C	6.4 / 3.2	1/3	B	0.25	£422.28
E	131603.00	230	Polyrex EM	180-034	184TC	19.0	3	F	2.24	£1,126.83
F	131602.00	230	Polyrex EM	180-034	184TC	20.5	5	F	3.7	£1,397.35

BALDOR MOTOR -

Grain Dryer/ Centrifugal Fan Farm Duty Motors, Three Phase, Open Drip Proof Cooled

Style	Model	Motor Type	Power Factor	Amps	Output	Overall Length	Break-down Torque	Speed	Voltage	Price (inc. VAT)
A	EGDM3218T	3640M	80	14.0 A @ 208 V 13.2 A @ 230 V 6.6 A @ 460 V	5.000 hp	17.5"	-	1,750 rpm	208 V 230 V 460 V	£1,582.26
A	EGDM3311T	3734M	79	20.4 A @ 208 V 19.4 A @ 230 V 9.7 A @ 460 V	7.500 hp	17.32"	77.6 LB-FT	1,770 rpm	208 V 230 V 460 V	£2,319.21
A	EGDM3313T	3742M	82	26.0 A @ 208 V 25.0 A @ 230 V 12.5 A @ 460 V	10.000 hp	18.45"	87.58 LB-FT	1,770 rpm	208 V 230 V 460 V	£2,748.13
A	EGDM2513T	3948M	85	38.0 A @ 208 V 36.0 A @ 230 V 18.0 A @ 460 V	15.000 hp	24.19"	141 LB-FT	1,765 rpm	230 V 460 V	£3,803.88
A	EGDM2515T	3948M	85	52.0 A @ 208 V 48.0 A @ 230 V 24.0 A @ 460 V	20.000 hp	24.19"	187 LB-FT	1,765 rpm	230 V 460 V	£4,402.93
A	EGDM2531T	4050M	82	64.0 A @ 208 V 60.0 A @ 230 V 30.0 A @ 460 V	25.000 hp	26.06"	216 LB-FT	1,770 rpm	460 V 230 V	£5,443.45
A	EGDM2535T	4060M	82	76.0 A @ 208 V 72.0 A @ 230 V 36.0 A @ 460 V	30.000 hp	27.06"	280 LB-FT	1,775 rpm	460 V 230 V	£6,089.97

CENTURY -

Pump Duty Motor, 1 hp, 3450 Rpm, 208-230VAC

Model	Item	Price (inc. VAT)
B583	CH6NLJ	£832.01

1 234

Farm Duty Motors

Farm duty motors produce high starting torque and facilitate moderate starting current for conveyors, barn cleaners, compressors and manure pumps. These pre-lubricated units feature an epoxy finish for resistance against high temperature & moisture, offering smooth movement of the motor components. Raptor Supplies offers a wide range of these farm duty motors from brands like Baldor, Century, Dayton, Marathon Motors and Leeson. Baldor farm motors feature double-sealed bearings to reduce the frictional losses and prevent overheating. These farm duty motors are also integrated with a condensate drain valve to remove the excess moisture condensed by cooling of the motor, which may lead to corrosion of motor parts and bursting of the pump when the water freezes. Dayton farm duty motors are capable of delivering continuous-duty operations in applications like aeration fans, auger drives, grain stirrers, irrigation tower drives and crop driers. These agricultural motors feature steel frame construction for structural rigidity and withstanding heavy impact loads. They further come equipped with a totally enclosed non-ventilated enclosure with gasketed capacitor covers, junction boxes and shaft slinger for preventing the ingress of external contaminants and motor damage. Totally enclosed farm duty motors from these brands prevent the entrance of insects, rodents and other foreign materials.

Uses

These farm duty motors are suitable for low to high starting torque applications in the aggregate & cement, air handling, food & beverage, chemical, oil and gas industries.

Features

Dayton Farm Duty Motors

Dayton farm duty motors keep fans moving under heavy load conditions.
They have totally enclosed, fan-cooled motor design to prevent the motor from contamination.
These farm duty motors comprise a fan that blows outside over the motor, keeping it cool rather than permitting outside air to circulate freely inside the motor.
They come equipped with a rolled steel frame for enhanced durability and have ball bearings to prevent overheating.
The units are available in horizontal, vertical and all angle installation positions with cradle / stud / yoke / base / flange mounting options, especially designed for operations including hatchery & poultry applications.
These farm duty motors are supplied in single or 3 phase units for efficient and robust performance.

Baldor Super-E & 1 ph Farm Duty Motors

Baldor motors are used on vane axial fan crop dryers with a soft start and deliver full load efficiency on a voltage up to 460V.
These units protect against noise & vibration problems from motor regeneration and are also less sensitive to voltage variations.
They have tan epoxy paint for harsh environments.
Baldor motors provides moisture resistant grease, capable of withstanding temperatures of Class F insulation (up to 155 degrees Celsius).
Baldor 1 ph farm duty motors are made of steel for structural rigidity.

Century Motors

Century agricultural fan motors, featuring high starting torque, provide dependable service during dirty & rough services, such as crop drying, running poultry equipment, manure pumps, augers or conveyors.
They feature double shielded bearings for extended service life.
Further, most of the Century motors have automatic reset thermal protectors to prevent power overload.
The moderate starting torque of motors enables reduction in fan stresses.
They come in a gasketed conduit box to protect wiring from dust entry.

General Purpose Leeson Farm Duty Motors

Leeson general purpose farm duty motors are ideal for rugged use in commercial and industrial settings and are widely used in pumps, compressors, blowers and fans.
The brand's single and three-phase AC motors are explosion proof and designed for continuous duty applications in agriculture, woodworking and metallurgy industries.
They feature double sealed ball bearings for prolonged service life and a gasket capacitor case having a conduit box cover to prevent the entry of foreign contaminants.
These units are available in single and 3 phase motor designs for powerful performance.

Marathon Farm Duty Motors

Marathon farm duty motors are suitable for power generating applications in the automotive, food & beverage, marine and oil & gas industries.
These high torque motors are single-phase units having one / two speed operation.
They have totally enclosed fan cooled, totally enclosed air over or totally enclosed non ventilated enclosures to suit multiple applications.
Further, these units are supplied with thru bolts for quick and secure fastening.
These motors have a direct drive option (incorporating auger drive in selected models), providing maximum speed and positional & dynamic accuracy.

Working Mechanism

Farm duty AC motors work on the principle of magnetism as they contain two fixed magnets and a coil of wire surrounding a shaft. When an electric charge is applied to the coil of wire, it becomes an electromagnet, hence generating a magnetic field. The equipped stator includes a loop of wire, solid metal axle, coil, squirrel cage made of metal bars and some other freely rotating metal parts that are capable of conducting electricity. In an AC motor, sending power to the outer coils make up the stator & the coils energise in sequence & pairs, generating a magnetic field that rotates around the motor.

Standards and Approvals

Dayton motors are manufactured in compliance with ISO industry standard to deliver high quality product services.
Baldor motors are UL listed, NEMA rated and also comply with CSA & CE certifications.
Century farm duty motors are UL listed and adheres to CSA standards.
Leeson duty AC motors are UL and CSA recognised.
Marathon motors have NEMA ratings to guarantee a degree of protection of the equipment inside the enclosure against ingress of foreign objects.

Features

Working Mechanism

Standards and Approvals

Frequently Asked Questions

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Farm Duty Motors

Extra High Torque Farm Duty Motors, Single Phase, Foot Mounted

Extra High Torque Farm Duty Motors, C-Face Footless, F-2 Single Phase

Crop Dryer Motors, Single Phase, Dripproof/Air Over, Rigid Base

Farm Duty AC Motors

Farm Duty Motors, Single Phase, Grain Dryer/Vane Axial Fan

Super-E Farm Duty Motors, Three Phase

Dairy/ Vaccum Fan Farm Duty Motors, Single Phase, Foot Mounted

Direct Drive Fan HVAC Motors, Resillent Base, Single Phase

Farm Duty Motors, C-Face, Foot Mounted, Single Phase

Aeration Fan Farm Duty Motors, Three Phase, Foot Mounted

Extra High Torque Farm Duty Motors, C-Face Footless, Single Phase

Universal Crop Dryer Farm Duty Motors, Single Phase, PSC

Extra-High Torque Chore Motors, Farm Duty/Agriculture, Single Phase, TEFC, Rigid Base

Hatchery And Incubator Fan Motors, Single Phase, TEAO

60 Hertz Feed Auger Drive Agricultural Duty Motors, Single Phase, TEFC

Industry Agricultural Duty Motors, Single Phase, TEFC, C Face Less Base

Integral Farm Duty Motors

High Torque Agricultural Duty Motors, Single Phase, TEFC, C Face Less Base

Grain Dryer/ Centrifugal Fan Farm Duty Motors, Three Phase, Open Drip Proof Cooled

Pump Duty Motor, 1 hp, 3450 Rpm, 208-230VAC

Farm Duty Motors

Uses

We are here to help!

Looking for a part not listed here?

Explore More

Select your cookie preferences

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Farm Duty Motors

Pump Duty Motor, 1 hp, 3450 Rpm, 208-230VAC

Farm Duty Motors

Uses

Features

Working Mechanism

Standards and Approvals

Frequently Asked Questions

What general safety instructions should be followed while operating Baldor motors?

What are the factors to consider while purchasing a motor?

We are here to help!

Looking for a part not listed here?

Explore More