What is the difference between an eyebolt and a ringbolt?

A standard eyebolt features a single forged ring on the top of the shank, whereas a ringbolt is equipped with an extra ring around the first ring. Eyebolts can only accommodate forces that are vertically above or below, while ringbolts can handle angled forces as well.

How to install eyebolts?

Determine the thickness of the material in which the bolt will be installed. Choose a bolt such that the threaded portion of the eyebolt protrudes out of the surface. If the eyebolt has unthreaded portion inside the material, use washers to raise the height of the bolt such that only the threaded portion is inside the material. Install the eyebolt inside the pre-tapped hole in the material. Use a screwdriver as a lever to screw in the bolt or hand-tighten it. Attach a nut if possible.

What are some safety precautions while using or installing eyebolts?

Use eyebolts with a higher working load limit than required. Check for signs of wear or damage on the bolts. The threads on the eyebolt's shank & tapped hole should be clean. Do not grind or cut the eyebolt as that would damage the inner strength of the bolt. Loads should be applied on the axis of the eye.

Eyebolts | Raptor Supplies United Kingdom

TE-CO -

Eye Bolts

A

B

C

D

E

F

G

H

I

J

K

L

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Overall Length	Shank Dia.	Shank Length	Thread Length	Thread Size	Price (inc. VAT)
A	42935	1/4"	5/8"	3-5/16	5/16"	2 11/16"	1.5"	5/16-18	£12.54
B	42955	3/4"	1.5"	5.25	3/4"	3.75"	2"	3/4-10	£34.67
C	42942	3/8"	3/4"	4.125	3/8"	3.375"	2"	3/8-16	£14.21
D	42943	3/8"	3/4"	5.375	3/8"	4.625"	2.5"	3/8-16	£16.91
E	42946	3/8"	1"	5.5	1/2"	4.5"	2"	1/2-13	£23.47
F	42951	3/8"	1.25"	6.625	5/8"	5.375"	2.5"	5/8-11	£31.30
G	42941	3/8"	3/4"	3.375	3/8"	2.625"	1.5"	3/8-16	£12.95
H	42945	3/8"	1"	4.25	1/2"	3.25"	1.5"	1/2-13	£19.91
I	42950	3/8"	1.25"	5.125	5/8"	3.875"	2"	5/8-11	£31.78
J	42930	3/16"	1/2"	2.25	1/4"	1.75"	3/4"	1/4-20	£8.64
K	42931	3/16"	1/2"	3.25	1/4"	2.75"	1.25"	1/4-20	£10.79
L	42940	5/16"	3/4"	3.375	3/8"	2.625"	1.5"	3/8-16	£12.14

KEN FORGING -

Eye Bolts

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Eyebolt Type	Finish	Material	Min. Tensile Strength	Overall Length	Shank Dia.	Price (inc. VAT)
A	K2008-LT	1 1/2"	2 13/16"	Lift without Shoulder	Plain	Steel	95,000 PSI	5.06"	3/4"	£77.41
B	N2028-316SS-6	1 1/2"	2 13/16"	Lift with Shoulder	Plain	Stainless Steel	-	9.39"	3/4"	£99.49
C	K2028-LT	1 1/2"	2 13/16"	Lift with Shoulder	Plain	Steel	95,000 PSI	5.5"	3/4"	£79.82
D	K2028-A-HDG	1 1/2"	2 13/16"	Lift with Shoulder	Galvanized	Steel	65,000 PSI	4.89"	3/4"	£30.02
E	K2028-4-SS	1 1/2"	2 13/16"	Lift with Shoulder	Plain	Stainless Steel	75,000 PSI	7.39"	3/4"	£98.71
F	K2028-3-SS	1 1/2"	2 13/16"	Lift with Shoulder	Plain	Stainless Steel	75,000 PSI	6.39"	3/4"	£89.14
G	K2028-2-1/2-SS	1 1/2"	2 13/16"	Lift with Shoulder	Plain	Stainless Steel	75,000 PSI	5.89"	3/4"	£83.60
H	K2028-4	1 1/2"	2 13/16"	Lift with Shoulder	Plain	Steel	65,000 PSI	3.4"	3/4"	£30.34
I	K2028-6	1 1/2"	1 1/2"	Lift with Shoulder	Plain	Steel	65,000 PSI	9.39"	3/4"	£31.57
J	N2008-316SS-12	1 1/2"	2 13/16"	Lift without Shoulder	Plain	Stainless Steel	-	14.81"	3/4"	£120.46
K	N2008-316SS-6	1 1/2"	2 13/16"	Lift without Shoulder	Plain	Stainless Steel	-	8.81"	3/4"	£98.08
L	K2028-SS	1 1/2"	2 13/16"	Lift with Shoulder	Plain	Stainless Steel	75,000 PSI	5.5"	3/4"	£64.13
D	K2028-HDG	1 1/2"	2 13/16"	Lift with Shoulder	Galvanized	Steel	65,000 PSI	5.5"	3/4"	£28.42
M	K2008-6	1 1/2"	2 13/16"	Lift without Shoulder	Plain	Steel	65,000 PSI	8.95"	3/4"	£30.23
N	K2008-SS	1 1/2"	2 13/16"	Lift without Shoulder	Plain	Stainless Steel	75,000 PSI	5.06"	3/4"	£62.34
O	K2008-HDG	1 1/2"	2 13/16"	Lift without Shoulder	Galvanized	Steel	65,000 PSI	5.06"	3/4"	£26.86
P	N2028-316SS-12	1 1/2"	2 13/16"	Lift with Shoulder	Plain	Stainless Steel	-	15.39"	3/4"	£112.44
Q	N2029-316SS-6	1 3/4"	3 1/2"	Lift with Shoulder	Plain	Stainless Steel	-	10.06"	7/8"	£111.76
R	N2029-316SS-12	1 3/4"	3 1/2"	Lift with Shoulder	Plain	Stainless Steel	-	16.06"	7/8"	£139.41
S	N2009-316SS-12	1 3/4"	3 1/2"	Lift without Shoulder	Plain	Stainless Steel	-	15.53"	7/8"	£117.31
T	N2009-316SS-6	1 3/4"	3 1/2"	Lift without Shoulder	Plain	Stainless Steel	-	9.53"	7/8"	£100.75
U	K2007-LT	1 3/8"	2 1/2"	Lift without Shoulder	Plain	Steel	95,000 PSI	4.56"	5/8"	£11.73
I	K2027-6	1 3/8"	2 1/2"	Lift with Shoulder	Plain	Steel	65,000 PSI	9.06"	5/8"	£26.03
V	N2007-316SS-6	1 3/8"	2 1/2"	Lift without Shoulder	Plain	Stainless Steel	-	8.5"	5/8"	£71.52
W	K2027-2-1/2-SS	1 3/8"	2 1/2"	Lift with Shoulder	Plain	Stainless Steel	75,000 PSI	5.56"	5/8"	£60.06

FABORY -

Eye Bolts

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Eyebolt Type	Finish	Item	Material	Overall Length	Shank Dia.	Price (inc. VAT)
A	L16180.080.0120	8 mm	18.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£1,031.63
B	L16180.080.0050	8 mm	18.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£1,156.74
C	M16180.080.0090	8 mm	18 mm	without Shoulder	Unfinished	Eye Bolt	Steel	90 mm	M8	£96.52
D	L16180.080.0140	8 mm	18.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£1,061.44
E	L16180.080.0080	8 mm	18.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£1,104.00
F	L16180.100.0060	10 mm	20.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£937.21
G	L16180.100.0070	10 mm	20.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£895.13
H	L16180.120.0150	12 mm	25.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£643.44
I	L16180.160.0160	16 mm	32.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£689.31
J	L16180.160.0060	16 mm	32.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£791.30
K	L16180.160.0200	16 mm	32.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£671.48
L	L16180.160.0120	16 mm	32.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£551.04
M	L16180.160.0080	16 mm	32.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£744.46
I	L16180.200.0160	18 mm	40.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£623.00
N	L51940.080.0001	20 mm	36.0 mm	with Shoulder	Plain	Eye Bolt	Stainless Steel	49.0 mm	8 mm	£928.75
O	L16180.240.0080	22 mm	45.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£1,248.64
P	L16180.240.0140	22 mm	45.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£738.83
Q	L16180.240.0150	22 mm	45.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£800.65
R	L16180.300.0160	28 mm	55.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£943.69
I	L16180.300.0180	28 mm	55.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£723.32
S	L16180.300.0200	28 mm	55.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	£826.16
T	L16010.120.0001	30 mm	54.0 mm	with Shoulder	Zinc	Eye Bolt	Steel	74.5 mm	12 mm	£279.37
T	L16010.200.0001	40 mm	72.0 mm	with Shoulder	Zinc	Eye Bolt	Steel	102.0 mm	20 mm	£303.38
U	L16000.240.0001	50 mm	90.0 mm	Lift with Shoulder	Plain	Eye Bolt	Steel	126.0 mm	24 mm	£334.58
U	M16000.240.0001	50.0mm	90.0mm	Lift with Shoulder	Plain	Lifting Eye Bolt	Steel	126mm	24.0mm	£126.57

CROSBY -

Eye Bolts

A

B

C

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Finish	Overall Length	Shank Length	Thread Size	Working Load Limit	Price (inc. VAT)
A	1045176	1 1/4"	2 1/4"	Galvanized	6.44"	4"	2-11	5,200 Lbs.	£59.41
B	9900257	2 1/4"	4 3/16"	Black Oxide	7.2"	2 3/4"	1 1/8-7	-	£138.86
B	9900280	3 1/2"	6 1/4"	Black Oxide	10.48"	3 3/4"	1 3/4-5"	-	£581.60
B	9900298	4 1/2"	8 3/4"	Black Oxide	14.88"	5"	2 1/2-4	-	£1,158.72
B	9900289	4"	7 5/8"	Black Oxide	12.33"	4"	2-4 1/2"	-	£752.84
C	1045050	5/8"	1 1/18"	Galvanized	3.5"	2 1/4"	1 1/2-18	1,200 Lbs.	£21.64

CHICAGO HARDWARE -

Eye Bolts

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Eyebolt Type	Finish	Material	Overall Length	Shank Dia.	Shank Length	Price (inc. VAT)
A	07465 0	1"	1.875"	Turned Wire	Plain	Stainless Steel	6"	1/2"	4"	£13.11
A	07460 5	1"	1.875"	Turned Wire	Plain	Stainless Steel	4"	1/2"	2"	-	RFQ
B	12845 2	1"	1-21/32"	Lift with Shoulder	Plain	Steel	3.25"	3/8"	1.25"	-	RFQ
C	11601 5	1"	1.875"	Turned Wire	Black Oxide	Steel	6"	1/2"	4"	-	RFQ
B	26056 5	1"	1-21/32"	Lift with Shoulder	Zinc	Steel	3.25"	3/8"	1.25"	£375.55
D	12045 6	1"	1.875"	Turned Wire	Black Oxide	Steel	8"	1/2"	6"	-	RFQ
E	07215 1	1"	1.875"	Turned Wire	Zinc	Steel	6"	1/2"	4"	£2.58
A	07470 4	1"	1.875"	Turned Wire	Plain	Stainless Steel	8"	1/2"	6"	-	RFQ
F	08262 4	1"	2"	Forged without Shoulder	Plain	Stainless Steel	5.25"	-	3.25"	-	RFQ
G	14215 1	1"	1-21/32"	Lift without Shoulder	Plain	Stainless Steel	2 29/32"	-	1.25"	£35.65
C	11591 9	1"	1.875"	Turned Wire	Black Oxide	Steel	4"	1/2"	2"	-	RFQ
E	07210 6	1"	1.875"	Turned Wire	Zinc	Steel	4"	1/2"	2"	-	RFQ
H	07220 5	1"	1.875"	Turned Wire	Zinc	Steel	8"	1/2"	6"	£2.96
I	26059 6	1-3/32"	1-27/32"	Lift with Shoulder	Zinc	Steel	3.625"	7/16"	1.375"	-	RFQ
B	12905 3	1-9/32"	2-9/32"	Lift with Shoulder	Plain	Steel	4.5"	9/16"	1.625"	-	RFQ
J	12968 8	1-11/16"	3.25"	Lift with Shoulder	Plain	Steel	6"	7/8"	2.25"	£279.12
B	12988 6	1-13/16"	3-9/16"	Lift with Shoulder	Plain	Steel	7"	1"	2.5"	£367.06
B	SP20371	1.5"	2-13/16"	Lift with Shoulder	Zinc	Steel	5 9/16"	3/4"	2.5"	£676.03
B	12948 0	1.5"	2-13/16"	Lift with Shoulder	Plain	Steel	5.25"	3/4"	2"	-	RFQ
K	14230 4	1.5"	2-13/16"	Lift without Shoulder	Plain	Stainless Steel	4 13/16"	-	2"	£136.24
F	11851 4	1.25"	2-5/16"	Forged without Shoulder	Plain	Stainless Steel	6 13/16"	-	4.5"	-	RFQ
L	08682 0	1.25"	2-5/16"	Forged with Shoulder	Plain	Stainless Steel	7.25"	-	4.5"	-	RFQ
M	11524 7	1.187"	2-1/16"	Blank with Shoulder	Plain	Stainless Steel	3.156"	1/2"	3/4"	£70.50
N	SP23134	1.187"	2-1/16"	Blank without Shoulder	Plain	Stainless Steel	2 13/16"	1/2"	3/4"	£70.50
O	12885 8	1.187"	2-1/16"	Lift with Shoulder	Plain	Steel	4"	1/2"	1.5"	-	RFQ

BUYERS PRODUCTS -

Eye Bolts

A

B

C

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Overall Length	Shank Length	Thread Size	Working Load Limit	Price (inc. VAT)
A	B56728	1 1/2"	2 13/16"	0.75"	2"	3/4-10	6,000 Lbs.	£18.66
A	B56727	1 3/8"	2 1/2"	0.63"	1 3/4"	5/8-11	4,000 Lbs.	-	RFQ
B	B56725	1 3/16"	2 1/16"	0.5"	1 1/2"	1/2-13	2,400 Lbs.	£9.76
A	B56729	1 11/16"	3 1/4"	0.88"	2 1/4"	7/8-9	7,000 Lbs.	£23.03
A	B56730	1 13/16"	3 9/16"	1.0"	2 1/4"	1-8	8,000 Lbs.	£33.40
B	B56723	1"	1 21/32"	0.38"	1 1/4"	3/8-16	1,400 Lbs.	£7.68
C	B56734BLK	2 9/16"	5 1/2"	1.5"	3 1/2"	Unthreaded	18,000 Lbs.	£62.64
B	B56721	3/4"	13/16"	N/A	1"	1/4-20	400 Lbs.	£7.05
B	B56722	7/8"	1 1/2"	0.31"	1 1/8"	5/16-18	1,000 Lbs.	£7.38

VULCAN HART -

Eye Bolts

A

B

Style	Model	Price (inc. VAT)
A	00-719331	£8.50	RFQ
B	00-402570-00003	-	RFQ
B	00-402570-00002	-	RFQ

PROTO -

Eye Bolt Lifts

A

B

C

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Item	Overall Length	Shank Dia.	Shank Length	Thread Length	Thread Size	Price (inc. VAT)
A	J94022	1"	1-11/16"	Eyebolt	3.5"	3/8"	1.25"	1.25"	3/8-16	£11.06
B	J94023	1-1/16"	1-13/16"	Eyebolt	3.75"	7/16"	1.375"	1.375"	7/16-14	£10.62
B	J94027	1.5"	2-13/16"	Eye Bolt	5.5"	3/4"	2"	2"	3/4-10	£26.68
B	J94029	1.75"	3-9/16"	Eyebolt	6.5"	1"	2.5"	2.5"	1-8	-	RFQ
B	J94025	1.375"	2-9/16"	Eyebolt	4.75"	9/16"	1.75"	1.75"	9/16-12	-	RFQ
B	J94026	1.375"	2-9/16"	Eyebolt	4.75"	5/8"	1.75"	1.75"	5/8-11	£22.47
C	J94028	1.625"	3.187"	Eyebolt	5.75"	7/8"	2.25"	2.25"	7/8-9	-	RFQ
B	J94030	2"	4-1/16"	Eyebolt	7.5"	1.125"	2.75"	2.75"	8	£55.93
B	J94032	2.5"	5.187"	Eyebolt	9.5"	1.5"	3.5"	3.5"	7	-	RFQ
B	J94033	2.75"	6"	Eyebolt	10.75"	1.75"	3.75"	3.75"	6	£241.07
B	J94031	2.187"	4.437"	Eyebolt	8.25"	1.25"	3"	3"	8	-	RFQ
B	J94034	3.25"	6.875"	Eyebolt	11.75"	2"	4"	4"	2.5	£179.19
B	J94021	7/8"	1.437"	Eyebolt	3"	5/16"	1.125"	1.125"	5/16-18	£10.50

CROSBY -

Pad Eyes

A

B

C

D

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Eyebolt Type	Finish	Overall Length	Price (inc. VAT)
A	1090768	0.63"	1 9/64"	Forged with Shoulder	Powder Coat	1.31"	£12.01
B	1090786	0.75"	1 1/2"	Forged with Shoulder	Powder Coat	1.63"	£12.13
C	1090820	1 1/4"	2 5/8"	Blank without Shoulder	Black Oxide	2.75"	£34.90
D	1090802	1"	2 9/64"	Forged with Shoulder	Powder Coat	2.34"	£21.64
C	1090722	1/4"	5/8"	Blank without Shoulder	Black Oxide	0.75"	£6.87
C	1090740	5/16"	7/8"	Blank without Shoulder	Black Oxide	1.03"	£8.92

FABORY -

Lifting Eye Bolts

A

B

C

D

E

F

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Item	Shank Dia.	Thread Size	Working Load Limit	Price (inc. VAT)
A	L16100.080.0001	20 mm	36 mm	Lifting Eye Bolt	-	M8 x 1.25	1400 (N)	£876.52	RFQ
A	L16100.060.0001	20 mm	36 mm	Lifting Eye Bolt	-	M6 x 1	900 (N)	£2,334.57	RFQ
B	L16000.060.0001	20 mm	36.0 mm	Eye Bolt	20 mm	M6 x 1	900 (N)	£413.30
B	L16000.080.0001	20 mm	36.0 mm	Eye Bolt	20 mm	M8 x 1.25	1400 (N)	£417.35
B	L16000.100.0001	25 mm	45.0 mm	Eye Bolt	25 mm	M10 x 1.5	2300 (N)	£414.26
A	L16100.100.0001	25 mm	45 mm	Lifting Eye Bolt	-	M10 x 1.5	2300 (N)	£845.33	RFQ
C	L16000.140.0001	30 mm	54.0 mm	Eye Bolt	30 mm	M14 x 2	5000 (N)	£889.47
B	L16000.120.0001	30 mm	54.0 mm	Eye Bolt	30 mm	M12 x 1.75	3400 (N)	£468.26
A	L16100.120.0001	30 mm	54 mm	Lifting Eye Bolt	-	M12 x 1.75	3400 (N)	£810.45	RFQ
D	L16000.160.0001	35 mm	63.0 mm	Eye Bolt	35 mm	M16 x 2	7000 (N)	£326.68
A	L16100.160.0001	35 mm	63 mm	Lifting Eye Bolt	-	M16 x 2	7000 (N)	£835.48	RFQ
D	L16000.220.0001	40 mm	72.0 mm	Eye Bolt	40 mm	M22x2.5	15,000 (N)	£346.09
A	L16100.220.0001	40 mm	72 mm	Lifting Eye Bolt	-	M22x2.5	15,000 (N)	£319.58
A	L16100.200.0001	40 mm	72 mm	Lifting Eye Bolt	-	M20 x 2.5	12,000 (N)	£938.43	RFQ
D	L16000.200.0001	40 mm	72.0 mm	Eye Bolt	40 mm	M20 x 2.5	12,000 (N)	£349.89
D	L16000.270.0001	50 mm	90.0 mm	Eye Bolt	50 mm	M27x3	25,000 (N)	£580.10
A	L16100.240.0001	50 mm	90 mm	Lifting Eye Bolt	-	M24 x 3	18,000 (N)	£292.64
E	L16000.330.0001	60 mm	108.0 mm	Eye Bolt	65 mm	M33x3.5	42,000 (N)	£658.56
D	L16000.300.0001	60 mm	108.0 mm	Eye Bolt	65 mm	M30x3.5	32,000 (N)	£336.88
A	L16100.300.0001	60 mm	108 mm	Lifting Eye Bolt	-	M30x3.5	32,000 (N)	£651.89
F	L16000.390.0001	70 mm	126.0 mm	Eye Bolt	75 mm	M39x4	60,000 (N)	£441.68
F	L16000.360.0001	70 mm	126.0 mm	Eye Bolt	75 mm	M36x4	46,000 (N)	£317.23
A	L16100.360.0001	70 mm	126 mm	Lifting Eye Bolt	-	M36x4	46,000 (N)	£480.92

SUPER-STRUT -

Eye Bolt

A

Style	Model	Finish	Length	Size
A	E157-5/8X12B	Black	12"	5/8"	RFQ
A	E157-3/8X8B	Black	8"	3/8"	RFQ
A	E157-1/2X36B	Black	36"	1/2"	RFQ
A	E157-1/2X8EG	Electro-Galvanized	8"	1/2"	RFQ

GRAINGER -

Low Carbon Steel 4.6 Eye Bolt, Plain Finish

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Thread Size	Price (inc. VAT)
A	M16180.060.0030	6.0mm	14.0mm	M6	£61.07
B	M16180.060.0070	6.0mm	14.0mm	M6	£110.47
C	M16180.060.0040	6.0mm	14.0mm	M6	£85.03
D	M16180.060.0050	6.0mm	14.0mm	M6	£37.38
E	M16180.060.0080	6.0mm	14.0mm	M6	£112.09
F	M16180.080.0050	8.0mm	18.0mm	M8	£64.53
G	M16180.080.0140	8.0mm	18.0mm	M8	£133.10
H	M16180.080.0100	8.0mm	18.0mm	M8	£112.94
I	M16180.080.0060	8.0mm	18.0mm	M8	£100.04
J	M16180.080.0070	8.0mm	18.0mm	M8	£99.62
K	M16180.080.0080	8.0mm	18.0mm	M8	£104.08
L	M16180.080.0120	8.0mm	18.0mm	M8	£121.51
M	M16180.100.0070	10.0mm	20.0mm	M10	£108.18
N	M16180.100.0050	10.0mm	20.0mm	M10	£110.09
O	M16180.100.0060	10.0mm	20.0mm	M10	£98.62
P	M16180.100.0040	10.0mm	20.0mm	M10	£104.60
Q	M16180.100.0090	10.0mm	20.0mm	M10	£122.49
R	M16180.100.0110	10.0mm	20.0mm	M10	£139.79
S	M16180.100.0140	10.0mm	20.0mm	M10	£164.16
T	M16180.100.0080	10.0mm	20.0mm	M10	£116.91
U	M16180.100.0100	10.0mm	20.0mm	M10	£111.10
V	M16180.120.0140	12.0mm	25.0mm	M12	£84.51
W	M16180.120.0120	12.0mm	25.0mm	M12	£80.91
X	M16180.120.0100	12.0mm	25.0mm	M12	£64.51
Y	M16180.120.0070	12.0mm	25.0mm	M12	£61.49

GRAINGER -

Low Carbon Steel C15E Lifting Eye Bolt, Plain Finish

A

B

C

D

E

F

G

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Shank Dia.	Thread Size	Working Load Limit	Price (inc. VAT)
A	M16000.080.0001	20.0mm	36.0mm	20.0mm	M8	1400 (N)	£77.80
B	M16100.080.0001	20.0mm	36.0mm	20.0mm	M8	1400 (N)	£74.55
B	M16100.060.0001	20.0mm	36.0mm	20.0mm	M6	900 (N)	£114.37
A	M16000.060.0001	20.0mm	36.0mm	20.0mm	M6	900 (N)	£56.45
B	M16100.100.0001	25.0mm	45.0mm	25.0mm	M10	2300 (N)	£124.18
A	M16000.100.0001	25mm	45mm	25.0mm	M10	2300 (N)	£128.19
C	M16100.140.0001	30.0mm	54.0mm	30.0mm	M14	5000 (N)	£85.22
B	M16100.120.0001	30.0mm	54.0mm	30.0mm	M12	3400 (N)	£192.46
D	M16000.140.0001	30mm	54mm	30.0mm	M14	5000 (N)	£187.48
A	M16000.120.0001	30mm	54mm	30.0mm	M12	3400 (N)	£213.23
B	M16100.160.0001	35.0mm	63.0mm	35mm	M16	7000 (N)	£116.74
E	M16000.160.0001	35mm	63mm	35mm	M16	7000 (N)	£94.71
E	M16000.220.0001	40.0mm	72.0mm	40.0mm	M22	15,000 (N)	£78.76
C	M16100.220.0001	40.0mm	72.0mm	40.0mm	M22	15,000 (N)	£85.39
B	M16100.200.0001	40.0mm	72.0mm	40.0mm	M20	12,000 (N)	£199.69
E	M16000.200.0001	40mm	72mm	40.0mm	M20	12,000 (N)	£137.85
E	M16000.270.0001	50.0mm	90.0mm	50.0mm	M27 x 3	25,000 (N)	£312.22
C	M16100.240.0001	50.0mm	90.0mm	50.0mm	M24	18,000 (N)	£157.38
E	M16000.300.0001	60.0mm	108.0mm	65mm	M30	32,000 (N)	£60.67
F	M16000.330.0001	60.0mm	108.0mm	65mm	M33	42,000 (N)	£158.84
C	M16100.300.0001	60.0mm	108.0mm	65mm	M30	32,000 (N)	£72.91
C	M16100.270.0001	60.0mm	108.0mm	65mm	M27	25,000 (N)	£313.26
G	M16000.360.0001	70.0mm	126.0mm	75mm	M36	46,000 (N)	£89.20
G	M16000.390.0001	70.0mm	126.0mm	75mm	M39	60,000 (N)	£160.61
C	M16100.360.0001	70.0mm	126.0mm	75mm	M36	46,000 (N)	£116.78

APPROVED VENDOR -

316 Stainless Steel Eyebolt, High Polish Finish

A

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Overall Length	Shank Dia.	Shank Length	Thread Length	Thread Size	Price (inc. VAT)
A	5LAE0	1/2"	1-1/16"	4.375"	5/16"	3"	2"	5/16-18	£13.53
A	5LAE2	1/2"	1-1/16"	6.375"	5/16"	5"	2"	5/16-18	£16.43
A	5LAE1	1/2"	1-1/16"	5 1/3"	5/16"	4"	2"	5/16-18	£14.51
A	5LAE3	1/2"	1-1/16"	7.375"	5/16"	6"	2"	5/16-18	£15.37
A	5LAD4	13/32"	23/32"	4"	3/16"	3"	2"	10-24	£9.33
A	5LAD3	13/32"	23/32"	3"	3/16"	2"	1.5"	10-24	£9.58
A	5LAD6	15/32"	29/32"	4.25"	1/4"	3"	2"	1/4-20	£11.95
A	5LAD8	15/32"	29/32"	6 5/16"	1/4"	5"	2"	1/4-20	£12.21
A	5LAD5	15/32"	29/32"	3.187"	1/4"	2"	1.5"	1/4-20	£10.35
A	5LAD7	15/32"	29/32"	5.187"	1/4"	4"	2"	1/4-20	£10.23
A	5LAD9	15/32"	29/32"	7"	1/4"	6"	2"	1/4-20	£11.86
A	5LAE4	21/32"	1-11/32"	4.5"	3/8"	3"	2"	3/8-16	£20.57
A	5LAE6	21/32"	1-11/32"	6.625"	3/8"	5"	2"	3/8-16	£22.37
A	5LAE7	21/32"	1-11/32"	7.625"	3/8"	6"	2"	3/8-16	£18.79
A	5LAE5	21/32"	1-11/32"	5.5"	3/8"	4"	2"	3/8-16	£21.75

APPROVED VENDOR -

Drop Forged Steel Eyebolt, Plain Finish

A

B

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Overall Length	Shank Dia.	Shank Length	Shoulder Dia.	Shoulder Length	Thread Length	Price (inc. VAT)
A	M16000.420.0001	80mm	147mm	210mm	42mm	63mm	85mm	67mm	63mm	£274.41
B	M16000.480.0001	90mm	168mm	236mm	48mm	68mm	100mm	78mm	68mm	£272.10
B	M16000.640.0001	110mm	208mm	298mm	64mm	90mm	120mm	98mm	90mm	£566.41

APPROVED VENDOR -

Drop Forged Carbon Steel Eyebolt, Hot Dipped Galvanized Finish

A

B

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Overall Length	Shank Dia.	Shank Length	Thread Length	Thread Size	Working Load Limit	Price (inc. VAT)
A	U16181.050.0450	1"	2"	6.5"	1/2"	4.5"	3"	1/2-13	2200 Lbs.	£12.76
A	U16181.050.1200	1"	2"	14"	1/2"	12"	4"	1/2-13	2200 Lbs.	£23.89
A	U16181.050.0800	1"	2"	10"	1/2"	8"	4"	1/2-13	2200 Lbs.	£19.58
A	U16181.050.0325	1"	2"	4.5"	1/2"	3.25"	2"	1/2-13	2200 Lbs.	£9.24
A	U16181.050.0200	1"	2"	4"	1/2"	2"	1.625"	1/2-13	2200 Lbs.	£11.75
A	U16181.050.1000	1"	2"	12"	1/2"	10"	4"	1/2-13	2200 Lbs.	£19.10
A	U16181.050.0600	1"	2"	8"	1/2"	6"	3"	1/2-13	2200 Lbs.	£13.38
A	U16181.025.0200	1/2"	1"	3"	1/4"	2"	1.5"	1/4-20	500 Lbs.	£8.08
A	U16181.025.0400	1/2"	1"	5"	1/4"	4"	2"	1/4-20	500 Lbs.	£8.54
A	U16181.025.0300	1/2"	1"	4"	1/4"	3"	1.5"	1/4-20	500 Lbs.	£8.16
A	U16181.025.0600	1/2"	1"	7"	1/4"	6"	3"	1/4-20	500 Lbs.	£9.94
A	U16181.037.0300	3/4"	1.5"	4.5"	3/8"	3"	1.5"	3/8-16	1200 Lbs.	£10.07
A	U16181.037.0800	3/4"	1.5"	9.5"	3/8"	8"	4"	3/8-16	1200 Lbs.	£15.21
B	U16181.037.0600	3/4"	1.5"	7.5"	3/8"	6"	3"	3/8-16	1200 Lbs.	-	RFQ
A	U16181.037.0400	3/4"	1.5"	5.5"	3/8"	4"	2"	3/8-16	1200 Lbs.	£12.15
A	U16181.037.0250	3/4"	1.5"	4"	3/8"	2.5"	1.5"	3/8-16	1200 Lbs.	£10.39
A	U16181.037.0450	3/4"	1.5"	6"	3/8"	4.5"	3"	3/8-16	1200 Lbs.	£11.25

APPROVED VENDOR -

Drop Forged Steel Eyebolt, Zinc Plated Finish

A

B

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Overall Length	Shank Dia.	Shank Length	Shoulder Dia.	Shoulder Length	Thread Length	Price (inc. VAT)
A	M16010.080.0001	20mm	36mm	49mm	8mm	13mm	20mm	6mm	13mm	£8.45
A	M16010.100.0001	25mm	45mm	62mm	10mm	17mm	25mm	8mm	17mm	£14.75
A	M16010.120.0001	30mm	54mm	74.5mm	12mm	20.5mm	30mm	10mm	20.5mm	£13.30
A	M16010.160.0001	35mm	63mm	90mm	16mm	27mm	35mm	12mm	27mm	£26.68
B	M16010.200.0001	40mm	72mm	102mm	20mm	30mm	40mm	14mm	30mm	£16.68
B	M16010.240.0001	50mm	90mm	126mm	24mm	36mm	50mm	18mm	36mm	£37.62
B	M16010.300.0001	60mm	108mm	153mm	30mm	45mm	65mm	22mm	45mm	£57.31
B	M16010.360.0001	70mm	126mm	180mm	36mm	54mm	75mm	26mm	54mm	£81.34

APPROVED VENDOR -

Drop Forged Carbon Steel Eyebolt, Zinc Plated Finish

A

B

C

D

E

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Eyebolt Type	Overall Length	Shank Dia.	Shank Length	Shoulder Dia.	Shoulder Length	Price (inc. VAT)
A	U16010.037.0300	1"	1-11/16"	with Shoulder	4.84" to 5.22"	3/8"	3"	0.62 to 0.69"	0.12" to 0.19"	£7.93
A	U16010.037.0250	1"	1-11/16"	with Shoulder	4.34" to 4.72"	3/8"	2.5"	0.62 to 0.69"	0.12" to 0.19"	£12.17
B	U16010.037.0125	1"	1-11/16"	with Shoulder	3.09" to 3.47"	3/8"	1.25"	0.62 to 0.69"	0.12" to 0.19"	£4.85
C	U16182.037.0300	1"	1-11/16"	without Shoulder	4.56" to 4.94"	3/8"	3"	-	-	£6.23
C	U16182.037.0250	1"	1-11/16"	without Shoulder	4.06" to 4.44"	3/8"	2.5"	-	-	£7.43
D	U16010.087.0226	1-11/16"	3.25"	with Shoulder	5.755" to 6.19"	7/8"	2.25"	1.31 to 1.44"	0.31" to 0.38"	£26.49
E	U16010.100.0250	1-13/16"	3-9/16"	with Shoulder	6.44" to 6.88"	1"	2.5"	1.50 to 1.62"	0.38" to 0.44"	£48.62
A	U16010.075.0250	1.5"	2-13/16"	with Shoulder	5.56" to 6"	3/4"	2.5"	1.12 to 1.25"	0.25" to 0.31"	£28.97
A	U16010.075.0300	1.5"	2-13/16"	with Shoulder	6.06" to 6.5"	3/4"	3"	1.12 to 1.25"	0.25" to 0.31"	£27.70
C	U16182.075.0300	1.5"	2-13/16"	without Shoulder	5.69" to 6.06"	3/4"	3"	-	-	£23.32
A	U16010.075.0200	1.5"	2-13/16"	with Shoulder	5.06" to 5.5"	3/4"	2"	1.12 to 1.25"	0.25" to 0.31"	£23.58
C	U16182.050.0300	1.187"	2-1/16"	without Shoulder	5" to 5.38"	1/2"	3"	-	-	£10.48
B	U16010.050.0150	1.187"	2-1/16"	with Shoulder	3.81" to 4.19"	1/2"	1.5"	0.88 to 0.94"	0.19" to 0.25"	£12.10
A	U16010.050.0300	1.187"	2-1/16"	with Shoulder	5.31" to 5.69"	1/2"	3"	0.88 to 0.94"	0.19" to 0.25"	£12.12
C	U16182.050.0150	1.187"	2-1/16"	without Shoulder	3.5" to 3.88"	1/2"	1.5"	-	-	£5.80
C	U16182.050.0250	1.187"	2-1/16"	without Shoulder	4.5" to 4.88"	1/2"	2.5"	-	-	£8.79
A	U16010.050.0250	1.187"	2-1/16"	with Shoulder	4.81" to 5.19"	1/2"	2.5"	0.88 to 0.94"	0.19" to 0.25"	£11.91
A	U16010.062.0250	1.375"	2.5"	with Shoulder	5.31" to 5.69"	5/8"	2.5"	1.00 to 1.06"	0.25" to 0.31"	£24.27
C	U16182.062.0300	1.375"	2.5"	without Shoulder	5.44" to 5.81"	5/8"	3"	-	-	£28.00
A	U16010.062.0300	1.375"	2.5"	with Shoulder	5.81" to 6.19"	5/8"	3"	1.00 to 1.06"	0.25" to 0.31"	£23.18
A	U16010.062.0175	1.375"	2.5"	with Shoulder	4.56" to 4.94"	5/8"	1.75"	1.00 to 1.06"	0.25" to 0.31"	£15.03
C	U16182.025.0100	3/4"	1.187"	without Shoulder	2.06" to 2.38"	1/4"	1"	-	-	£2.12
B	U16010.025.0100	3/4"	1.187"	with Shoulder	2.22" to 2.53"	1/4"	1"	0.50 to 0.56"	0.12" to 0.19"	£5.11
B	U16010.031.0112	7/8"	1.437"	with Shoulder	2.66" to 2.97"	5/16"	1.125"	0.56 to 0.62"	0.12" to 0.19"	£5.84

APPROVED VENDOR -

Drop Forged Carbon Steel Eyebolt, Plain Finish

A

B

C

D

E

F

G

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Eyebolt Type	Overall Length	Shank Dia.	Shank Length	Shoulder Dia.	Shoulder Length	Price (inc. VAT)
A	U16180.037.0125	1"	1.625"	without Shoulder	2.81" to 3.19"	3/8"	1.25"	-	-	£5.10
B	U16000.037.0250	1"	1-11/16"	with Shoulder	4.34" to 4.72"	3/8"	2.5"	0.62 to 0.69"	0.12" to 0.19"	£5.20
B	U16000.037.0300	1"	1-11/16"	with Shoulder	4.84" to 5.22"	3/8"	3"	0.62 to 0.69"	0.12" to 0.19"	£31.69
B	U16000.037.0062	1"	1-11/16"	with Shoulder	2.47" to 2.85"	3/8"	5/8"	0.62 to 0.69"	0.12" to 0.19"	£3.88
A	U16180.037.0300	1"	1-11/16"	without Shoulder	4.56" to 4.94"	3/8"	3"	-	-	£12.62
A	U16180.037.0250	1"	1-11/16"	without Shoulder	4.06" to 4.44"	3/8"	2.5"	-	-	£13.50
B	U16000.037.0075	1"	1-11/16"	with Shoulder	2.59" to 2.97"	3/8"	3/4"	0.62 to 0.69"	0.12" to 0.19"	£5.39
B	U16000.037.0125	1"	1-11/16"	with Shoulder	3.09" to 3.47"	3/8"	1.25"	0.62 to 0.69"	0.12" to 0.19"	£5.44
C	U16000.043.0137	1-3/32"	1-27/32"	with Shoulder	3.41" to 3.78"	7/16"	1.375"	0.75 to 0.81"	0.19" to 0.25"	£8.64
D	U16000.087.0225	1-11/16"	3.25"	with Shoulder	5.755" to 6.19"	7/8"	2.25"	1.31 to 1.44"	0.31" to 0.38"	£27.40
E	U16000.100.0250	1-13/16"	3-9/16"	with Shoulder	6.44" to 6.88"	1"	2.5"	1.50 to 1.62"	0.38" to 0.44"	£37.89
A	U16180.075.0300	1.5"	2-13/16"	without Shoulder	5.69" to 6.06"	3/4"	3"	-	-	£31.23
C	U16000.075.0125	1.5"	2-13/16"	with Shoulder	4.31" to 4.75"	3/4"	1.25"	1.12 to 1.25"	0.25" to 0.31"	£20.51
A	U16180.075.0200	1.5"	2-13/16"	without Shoulder	4.69" to 5.06"	3/4"	2"	-	-	£24.30
C	U16000.075.0150	1.5"	2-13/16"	with Shoulder	4.56" to 5"	3/4"	1.5"	1.12 to 1.25"	0.25" to 0.31"	£24.01
D	U16000.075.0250	1.5"	2-13/16"	with Shoulder	5.56" to 6"	3/4"	2.5"	1.12 to 1.25"	0.25" to 0.31"	£27.94
F	U16180.075.0250	1.5"	2-13/16"	without Shoulder	5.19" to 5.56"	3/4"	2.5"	-	-	£32.90
D	U16000.075.0300	1.5"	2-13/16"	with Shoulder	6.06" to 6.5"	3/4"	3"	1.12 to 1.25"	0.25" to 0.31"	£28.86
D	U16000.075.0200	1.5"	2-13/16"	with Shoulder	5.06" to 5.5"	3/4"	2"	1.12 to 1.25"	0.25" to 0.31"	£22.73
C	U16000.050.0150	1.187"	2-1/16"	with Shoulder	3.81" to 4.19"	1/2"	1.5"	0.88 to 0.94"	0.19" to 0.25"	£10.77
C	U16000.050.0250	1.187"	2-1/16"	with Shoulder	4.81" to 5.19"	1/2"	2.5"	0.88 to 0.94"	0.19" to 0.25"	£14.41
A	U16180.050.0250	1.187"	2-1/16"	without Shoulder	4.5" to 4.88"	1/2"	2.5"	-	-	£20.34
A	U16180.050.0300	1.187"	2-1/16"	without Shoulder	5" to 5.38"	1/2"	3"	-	-	£20.11
G	U16000.050.0300	1.187"	2-1/16"	with Shoulder	5.31" to 5.69"	1/2"	3"	0.88 to 0.94"	0.19" to 0.25"	£19.74
C	U16000.050.0100	1.187"	2-1/16"	with Shoulder	3.31" to 3.69"	1/2"	1"	0.88 to 0.94"	0.19" to 0.25"	£10.14

APPROVED VENDOR -

Low Carbon Steel Eyebolt, Zinc Plated Finish

A

B

C

D

E

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Eyebolt Type	Overall Length	Shank Dia.	Shank Length	Thread Length	Thread Size	Price (inc. VAT)
A	U17420.050.0200	1"	1.875"	Turned Wire	4"	1/2"	2"	1.5"	1/2-13	£5.90
A	U17420.050.0400	1"	1.875"	Turned Wire	6"	1/2"	4"	2.5"	1/2-13	£2.71
B	U17420.050.0600	1"	1.875"	Turned Wire	8"	1/2"	6"	4"	1/2-13	£3.97
C	U17420.025.0100	1/2"	15/16"	Turned Wire	2"	1/4"	1"	7/8"	1/4-20	£4.46
A	U17420.025.0500	1/2"	15/16"	Turned Wire	6"	1/4"	5"	3"	1/4-20	£8.20
A	U17420.025.0300	1/2"	15/16"	Turned Wire	4"	1/4"	3"	1.5"	1/4-20	£6.13
A	U17420.025.0400	1/2"	15/16"	Turned Wire	5"	1/4"	4"	2.5"	1/4-20	£5.15
D	35Z550	1/2"	15/16"	Open Wire	3"	1/4"	2"	1 15/16"	1/4-20	£6.40
C	U17420.025.0200	1/2"	15/16"	Turned Wire	3"	1/4"	2"	1.25"	1/4-20	£5.20
C	U17420.025.0150	1/2"	15/16"	Turned Wire	2.5"	1/4"	1.5"	1.25"	1/4-20	£5.87
A	U17420.037.0200	3/4"	1-13/32"	Turned Wire	3.5"	3/8"	2"	1.25"	3/8-16	£14.60
A	U17420.037.0500	3/4"	1-13/32"	Turned Wire	6.5"	3/8"	5"	3"	3/8-16	£19.57
C	U17420.037.0100	3/4"	1-13/32"	Turned Wire	2.5"	3/8"	1"	7/8"	3/8-16	£10.57
B	U17420.037.0600	3/4"	1-13/32"	Turned Wire	7.5"	3/8"	6"	3.75"	3/8-16	£21.26
A	U17420.037.0300	3/4"	1-13/32"	Turned Wire	4.5"	3/8"	3"	1.5"	3/8-16	£14.03
A	U17420.037.0250	3/4"	1-13/32"	Turned Wire	4"	3/8"	2.5"	1.5"	3/8-16	£13.67
A	U17420.037.0400	3/4"	1-13/32"	Turned Wire	5.5"	3/8"	4"	2.5"	3/8-16	£14.67
E	U17420.050.1118	5/8"	1-33/64"	Turned Wire	12 13/16"	1/2"	11.187"	2.5"	1/2-13	£6.44
C	U17420.031.0100	5/8"	1-11/64"	Turned Wire	2.125"	5/16"	1"	7/8"	5/16-18	£7.18
C	U17420.031.0200	5/8"	1-11/64"	Turned Wire	3.125"	5/16"	2"	1.25"	5/16-18	£10.26
A	U17420.031.0300	5/8"	1-11/64"	Turned Wire	4.125"	5/16"	3"	1.5"	5/16-18	£9.51
A	U17420.031.0400	5/8"	1-11/64"	Turned Wire	5.125"	5/16"	4"	2.5"	5/16-18	£12.18

APPROVED VENDOR -

Steel Eyebolt, Black Oxide Finish

A

B

C

D

E

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Opening Size	Overall Length	Shank Dia.	Shank Length	Thread Length	Thread Size	Price (inc. VAT)
A	Z0047	3/4"	1.5"	3/4"	5.25"	1"	3 15/16"	1"	3/4-10	£95.77
B	Z0043	3/8"	1"	3/8"	4.5"	3/4"	3 11/16"	1"	1/2-13	£42.24
C	Z0041	3/8"	3/4"	3/8"	3.375"	5/8"	2 13/16"	1"	3/8-16	£38.39
D	Z0042	3/8"	1"	3/8"	4.25"	3/4"	3.437"	1"	1/2-13	£47.28
E	Z0040	3/16"	1/2"	3/16"	2.25"	3/8"	1 13/16"	3/4"	1/4-20	£30.00
B	Z0044	5/8"	1.25"	5/8"	5.125"	7/8"	4 1/16"	1"	5/8-11	£69.70
B	Z0046	5/8"	1.25"	5/8"	6.625"	7/8"	5 9/16"	1"	5/8-11	£85.66

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Eyebolts

Eye Bolts

Eye Bolts

Eye Bolts

Eye Bolts

Eye Bolts

Eye Bolts

Eye Bolts

Eye Bolt Lifts

Pad Eyes

Lifting Eye Bolts

Eye Bolt

Low Carbon Steel 4.6 Eye Bolt, Plain Finish

Low Carbon Steel C15E Lifting Eye Bolt, Plain Finish

316 Stainless Steel Eyebolt, High Polish Finish

Drop Forged Steel Eyebolt, Plain Finish

Drop Forged Carbon Steel Eyebolt, Hot Dipped Galvanized Finish

Drop Forged Steel Eyebolt, Zinc Plated Finish

Drop Forged Carbon Steel Eyebolt, Zinc Plated Finish

Drop Forged Carbon Steel Eyebolt, Plain Finish

Low Carbon Steel Eyebolt, Zinc Plated Finish

Steel Eyebolt, Black Oxide Finish

Eyebolts

Frequently Asked Questions

We are here to help!

Looking for a part not listed here?

Popular Search Queries

Explore More

Select your cookie preferences

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Eyebolts

Eyebolts

Frequently Asked Questions

What is the difference between an eyebolt and a ringbolt?

How to install eyebolts?

What are some safety precautions while using or installing eyebolts?

We are here to help!

Looking for a part not listed here?

Popular Search Queries

Explore More