Die Grinders | Raptor Supplies United Kingdom

Die Grinders

Filter
SPEEDAIRE -

Mini Air Die Grinder

Speedaire air-powered die grinders are used for tasks such as reworking dies, polishing metal, removing gaskets and smoothing welds. These units run on compressed air and feature lighter construction than corded or cordless grinders to reduce operator fatigue during extended use. An attachment's rated speed must equal or exceed the grinder's maximum speed for preventing the attachment from breaking or flying apart. These tools comprise few moving parts, so they tend to run cool and have an extended lifespan. They are available in right angle & straight die grinders options.

StyleModelAverage Cfm @ 15 Second Run TimeCfm @ Full LoadFree SpeedPrice (inc. VAT)
A10D2301.687.7317,000 rpm£102.28
B10D2311.686.7215,000 rpm£98.16
C10D2351.837.3225,000 rpm£75.51
JET TOOLS -

Cordless Die Grinders

StyleModelPrice (inc. VAT)
A505401£66.85
B505415£103.69
C505402£133.71
D505403£85.96
JET TOOLS -

Sanders

StyleModelItemPrice (inc. VAT)
A612024Pad£48.63
B578248Sander£686.24
POWERMATIC -

Disc Sanders

StyleModelPrice (inc. VAT)
A1791264£3,386.39
B1791291K£2,090.60
C1791276£3,286.79
CHICAGO PNEUMATIC -

CP3119 Series Die Grinders, 900 Watts

StyleModelFree SpeedItemOverall LengthPrice (inc. VAT)
ACP3119-18ES18,000 rpmAir Die Grinder14.2"£1,450.65
BCP3119-1212000 rpmDie Grinder8.8"£1,378.20
CCP3119-12EL12000 rpmDie Grinder23.7"£2,408.11
DCP3119-1818000 rpmDie Grinder Governed Motor 0.8 HP8.8"£1,440.91
ECP3119-2222000 rpmDie Grinder8.8"£1,298.36
CHICAGO PNEUMATIC -

Die Grinders, 750 Watts

StyleModelAverage Cfm @ 15 Second Run TimeCfm @ Full LoadExhaustFree SpeedOverall LengthVariable SpeedPrice (inc. VAT)
ACP3451-18SEC7.530.0Rear18,000 rpm13"No£706.99
BCP9113GES8.032.0Side25,000 rpm12.625"Yes£628.25
CCP9113G8.032.0Front25,000 rpm6.7"Yes£411.34
DOTCO -

Air-Powered Die Grinders

StyleModelPrice (inc. VAT)
A10L2000-01£808.61
B12L2218-36£1,333.83
C10LF280-36£996.06
D12L1000-36£478.98
INGERSOLL-RAND -

Air-Powered Die Grinders

StyleModelItemPrice (inc. VAT)Pkg. Qty.
AM2A120RG4Die Grinder£1,056.101
BM2X180RG4Die Grinder£946.851
AM2A180RG4Die Grinder£1,068.091
BM2X200RG4Die Grinder£943.561
CM2H250RG4Die Grinder£691.301
BM2X250RG4Die Grinder£959.001
BM2X075RG4Die Grinder£1,043.601
D5103MAX-24Die Grinder£5,588.7224
E301BKKit£129.581
F77H50B106Wire Brush£2,272.741
F77H30B106Wire Brush£2,283.061
SHARP -

Surface Grinders

StyleModelPrice (inc. VAT)
ASH-1224£64,110.44
BSG-618-2A£38,267.73
CSG-820-2A£46,852.23
ASH-920£53,190.58
BSG-618£23,145.10
DSH-1632£80,777.88
CHICAGO PNEUMATIC -

CP3000 Series Inline Die Grinders

StyleModelAverage Cfm @ 15 Second Run TimeCfm @ Full LoadFree SpeedHpOverall LengthPrice (inc. VAT)
ACP3000-325R4.217.025,000 rpm0.46"£429.57
ACP3000-330R4.7519.030,000 rpm0.46"£409.47
ACP3000-415R5.321.215,000 rpm0.57 23/32"£473.10
ACP3000-418R5.321.218,000 rpm0.57 23/32"£478.07
ACP3000-424R5.823.324,000 rpm0.57 23/32"£468.89
ACP3000-420R5.823.320,000 rpm0.57 23/32"£471.23
BCP3000-515R6.2525.015,000 rpm0.77 3/5"£475.44
CCP3000-518R7.028.018,000 rpm0.77 3/5"£564.60
CCP3000-520R7.028.020,000 rpm0.77 3/5"£543.19
CHICAGO PNEUMATIC -

CP3019 Series Air-Powered Die Grinders

StyleModelFree SpeedItemLengthPrice (inc. VAT)
ACP3019-12AC12000 rpmDie Grinder8.5"£867.32
BCP3019-20AC20000 rpmAngle Die Grinder"dustrial 1/4"8.5"£873.98
CCP3019-2020000 rpmDie Grinder Governed Motor 0.5 HP6.7"£660.96
CCP3019-2525000 rpmDie Grinder Governed Motorr 0.5 HP6.6"£671.61
DCP3019-25ES25000 rpmDie Grinder Extend Governed Motor 0.5 HP9.8"£898.83
ECP3019-40ES40000 rpmDie Grinder9.8"£922.54
CHICAGO PNEUMATIC -

CP74 Series Die Grinders

StyleModelAir ConsumptionDbaHpMax. SpeedOrientationOverall LengthRpmStylePrice (inc. VAT)
A89410740502.7 cfm87.20.328000 RPMStraight6 7/8"28000 RPMStraight£170.34
B89410740602.7 cfm89.10.323000 RPM90° Angle6 3/8"23000 RPMRight Angle£167.10
C89410740802.7 cfm89.60.323000 RPM120°7 3/4"23000 RPM120°£188.84
D89410741002.7 cfm87.10.327000 RPMStraight, Extended9 3/4"27000 RPMStraight£188.84
E89410741203.6 cfm91.40.622000 RPM-13"22000 RPMStraight£449.55
F89410741103.6 cfm91.70.622000 RPMStraight7 1/8"22000 RPMStraight£241.53
CHICAGO PNEUMATIC -

Die Grinder Kits

StyleModelItemPrice (inc. VAT)
ACP875KAir Die Grinder£192.28
BCP7411KKit£267.72
CHICAGO PNEUMATIC -

Die Grinders, 400 Watts

StyleModelAverage Cfm @ 15 Second Run TimeCfm @ Full LoadDutyExhaustFree SpeedHpItemOverall LengthPrice (inc. VAT)
ACP860ES------Die Grinder Extended 0.5 HP 1/4"-£459.48
BCP8755.522.0GeneralFront22,500 rpm0.3Air Die Grinder4.875"£73.04
CCP8605.2521.0IndustrialRear24,000 rpm0.5Air Die Grinder5.75"£232.02
DCP8766.024.0GeneralRear30,000 rpm0.3Air Die Grinder4.75"£113.15
StyleModelItemPrice (inc. VAT)
A7100075502Air Disc Sander£1,401.59
A7100142325Disc Sander£981.95
DYNABRADE -

Air-Powered Die Grinders

StyleModelItemPrice (inc. VAT)
A48317Angle Grinder£1,110.34
B56759Die£955.35
C47200Die£1,255.16
DDGR31Die Grinder£240.11
DDGR32Die Grinder£240.11
EDGS31Die Grinder£185.48
F52289Die Grinder£1,027.76
GDGR52Die Grinder£257.89
HDGS52Die Grinder£185.48
EDGS32Die Grinder£185.48
I56739Grinder£1,103.98
J48337Grinder£802.90
CHICAGO PNEUMATIC -

CP3030 Series Right Angle Air Die Grinders

StyleModelAverage Cfm @ 15 Second Run TimeCfm @ Full LoadFree SpeedHpOverall LengthPrice (inc. VAT)
ACP3030-325R4.7519.025,000 rpm0.46.125"£463.66
BCP3030-330R4.7519.030,000 rpm0.46.125"£437.84
CCP3030-420R5.723.020,000 rpm0.56 13/16"£495.12
CCP3030-418R5.2521.018,000 rpm0.56.875"£525.08
CCP3030-424R6.2525.024,000 rpm0.56 13/16"£535.74
DCP3030-520R7.530.020,000 rpm0.76 13/16"£549.74
CLECOTOOLS -

Air-Powered Die Grinders

StyleModelItemPrice (inc. VAT)
A12L1082-36Die Grinder£498.75
B10LF200-36Die Grinder£990.16
C10L2500-01Die Grinder£807.78
A12L1080-36Die Grinder£523.27
D12L1181-36Grinder£857.56
A12L1003-36Grinder£458.16
DYNABRADE -

Right Angle Air Die Grinder

StyleModelAverage Cfm @ 15 Second Run TimeCfm @ Full LoadExhaustFree SpeedHpMin. Hose SizeOverall LengthPrice (inc. VAT)
A522065.020.0Rear30,000 rpm0.41/4"6"£797.82
B522045.020.0Front25,000 rpm0.41/4"6"£797.82
C472125.7523.0Rear5000 rpm0.41/4"9"£1,025.22
D483355.7523.0Rear25,000 rpm0.41/4"7 9/32"£802.90
C472115.7523.0Rear3200 rpm0.41/4"9"£1,025.22
E482055.7523.0Rear25,000 rpm0.41/4"9"£891.83
F522215.7523.0Rear18,000 rpm0.53/8"8.25"£974.40
G522166.526.0Front15,000 rpm0.53/8"6"£928.67
H494206.526.0Rear3200 rpm0.41/4"11 21/32"£2,019.95
I494256.2525.0Rear3200 rpm0.41/4"7 23/32"£1,462.24
D483166.2525.0Rear15,000 rpm0.41/4"6.5"£1,110.34
J460026.2525.0Rear20,000 rpm0.41/4"8"£860.34
K460006.2525.0Rear12,000 rpm0.41/4"8"£1,131.93
K460016.2525.0Rear15,000 rpm0.41/4"8"£1,131.93
L522127.028.0Front20,000 rpm0.51/4"6"£928.67
M522187.028.0Front20,000 rpm0.53/8"6"£928.67
N522117.028.0Front18,000 rpm0.51/4"6"£928.67
O522938.534.0Rear18,000 rpm0.73/8"8.125"£1,074.77
P522909.036.0Front20,000 rpm0.73/8"5.125"£1,027.76
Q543439.538.0Rear12,000 rpm0.71/4"7.875"£1,375.85
O522949.2537.0Rear20,000 rpm0.73/8"8.125"£1,074.77
Q5435910.2541.0Rear18,000 rpm0.71/4"7.875"£1,375.85
R5436310.2541.0Rear18,000 rpm0.71/4"11.25"£1,590.55
DYNABRADE -

Die Grinders

StyleModelMax. SpeedOrientationOverall LengthRpmStyleTool WeightPrice (inc. VAT)
ADGR5114000 rpmRight Angle7 1/8"14000 RPMRight Angle1.6 lbs.£257.89
BDGS5120000 RPMStraight7"20000 RPMStraight1.3 lbs.£185.48
DYNABRADE -

Straight Air Die Grinder

StyleModelAir InletAverage Cfm @ 15 Second Run TimeCfm @ Full LoadExhaustFree SpeedHandle MaterialHpMin. Hose SizePrice (inc. VAT)
A483601/4" NPT5.7523.0Rear20,000 rpmComposite with Rubber Grip0.41/4"£630.12
B513051/4" NPT6.526.0Rear18,000 rpmComposite0.53/8"£730.48
C535101/4" NPT7.530.0Rear18,000 rpmComposite0.53/8"£1,142.10
D538081/4" NPT7.029.0Rear24,000 rpmSteel0.53/8"£777.49
E483251/4" NPT5.7523.0Rear25,000 rpmComposite with Rubber Grip0.41/4"£475.75
F538111/4" NPT9.2537.0Front20,000 rpmSteel0.73/8"£688.56
G535111/4" NPT7.7531.0Rear20,000 rpmComposite0.53/8"£1,142.10
H522771/4" NPT8.534.0Rear18,000 rpmComposite0.73/8"£914.69
I522761/4" NPT8.032.0Rear15,000 rpmComposite0.73/8"£914.69
J522571/4" NPT8.033.0Front18,000 rpmComposite0.71/4"£866.42
K522561/4" NPT7.7531.0Front15,000 rpmComposite0.71/4"£866.42
L522021/4" NPT5.020.0Front30,000 rpmComposite0.41/4"£619.96
L522001/4" NPT5.020.0Front25,000 rpmComposite0.41/4"£619.96
M521021/4" NPT8.535.0Rear4500 rpmComposite0.73/8"£1,206.89
E483271/4" NPT5.7523.0Rear30,000 rpmComposite with Rubber Grip0.41/4"£630.12
N513061/4" NPT6.527.0Rear20,000 rpmComposite0.53/8"£730.48
O513071/4" NPT6.527.0Rear24,000 rpmComposite0.53/8"£730.48
P513041/4" NPT6.2525.0Rear15,000 rpmComposite0.53/8"£730.48
Q472011/4" NPT5.7523.0Rear3200 rpmComposite0.41/4"£929.94
R483551/4" NPT5.7523.0Rear35,000 rpmComposite with Rubber Grip0.41/4"£630.12
Q472021/4" NPT5.7523.0Rear5000 rpmComposite with Rubber Grip0.41/4"£929.94
J522581/4" NPT8.534.0Front20,000 rpmComposite0.73/8"£866.42
S526671/4" NPT9.7539.0Rear15,000 rpmComposite1.03/8"£1,002.35
T526691/4" NPT11.044.0Rear20,000 rpmComposite1.03/8"£1,002.35
U513031/4" NPT6.024.0Front24,000 rpmComposite0.53/8"£691.10

We are here to help!

Looking for a part not listed here?