Micro 100 Carbide End Mills | Raptor Supplies United Kingdom

MICRO 100 -

Non Center Carbide End Mill

A

B

C

Style	Model	Diameter	Dimension Type	Finish	Length Of Cut	List Number	Number Of Flutes	Overall Length	Shank Dia.	Price (inc. VAT)
A	SDH-500-03	1/2"	Fractional Inch	Uncoated	1"	SDH	3	3"	1/2"	£94.69
B	SDH-500-03X	1/2"	Fractional Inch	AlTiN Coated	1"	SDH	3	3"	1/2"	£110.22
A	SDH-500-04X	1/2"	Fractional Inch	AlTiN Coated	1"	SDH	4	3"	1/2"	£118.96
A	SDH-500-04	1/2"	Fractional Inch	Uncoated	1"	SDH	4	3"	1/2"	£105.85
C	SDH-250-03	1/4"	Fractional Inch	Uncoated	3/4"	SDH	3	2.5"	1/4"	£43.48
A	SDH-250-03X	1/4"	Fractional Inch	AlTiN Coated	3/4"	SDH	3	2.5"	1/4"	£49.21
A	SDHM-060-3	6mm	Metric	Uncoated	18mm	SDHM	3	57mm	6.00mm	£34.95
A	SDHM-120-4	12mm	Metric	Uncoated	30mm	SDHM	4	83mm	12.00mm	£79.95
A	SDHM-160-3X	16mm	Metric	AlTiN Coated	35mm	SDHM	3	92mm	16.00mm	£173.92

MICRO 100 -

Center Carbide End Mill

A

B

C

D

E

F

G

H

I

Style	Model	Corner Radius	Diameter	Dimension Type	End	End Style	Finish	Helix Angle	Length Of Cut	Price (inc. VAT)
A	ARMM-060-3	-	6mm	Metric	Single	Square	Uncoated	45 Degrees	20mm	£39.73
B	SEM-203-04X	-	13/64"	Fractional Inch	Single	Square	AlTiN Coated	30 Degrees	3/8"	£40.86
C	MMBM-004-3X	-	0.4mm	Metric	Single	Ball Nose	AlTiN Coated	30 Degrees	0.4mm	£67.03
D	SME-006-2	-	0.006"	Decimal Inch	Single	Square	Uncoated	30 Degrees	0.009"	£76.04
D	SME-006-2X	-	0.006"	Decimal Inch	Single	Square	AlTiN Coated	30 Degrees	0.009"	£79.57
D	SME-009-2	-	0.009"	Decimal Inch	Single	Square	Uncoated	30 Degrees	0.013"	£53.09
D	SME-009-2X	-	0.009"	Decimal Inch	Single	Square	AlTiN Coated	30 Degrees	0.013"	£56.34
D	SME-010-2	-	0.01"	Decimal Inch	Single	Square	Uncoated	30 Degrees	0.015"	£53.09
E	RMEM-007-2	-	0.7mm	Metric	Single	Square	Uncoated	30 Degrees	2.1mm	£28.30
D	SME-010-2X	-	0.01"	Decimal Inch	Single	Square	AlTiN Coated	30 Degrees	0.015"	£58.34
D	SME-012-2	-	0.012"	Decimal Inch	Single	Square	Uncoated	30 Degrees	0.018"	£43.59
D	SME-012-2X	-	0.012"	Decimal Inch	Single	Square	AlTiN Coated	30 Degrees	0.018"	£53.14
D	SME-013-2	-	0.013"	Decimal Inch	Single	Square	Uncoated	30 Degrees	0.019"	£44.65
E	RMEM-008-2X	-	0.8mm	Metric	Single	Square	AlTiN Coated	30 Degrees	2.4mm	£29.45
E	RMEM-010-2	-	1mm	Metric	Single	Square	Uncoated	30 Degrees	3mm	£28.30
F	SEM-156-04	-	5/32"	Fractional Inch	Single	Square	Uncoated	30 Degrees	5/16"	£32.47
F	SEM-234-04	-	15/64"	Fractional Inch	Single	Square	Uncoated	30 Degrees	7/16"	£38.98
E	RMEM-011-2	-	1.1mm	Metric	Single	Square	Uncoated	30 Degrees	3.3mm	£28.16
E	RMEM-011-2X	-	11mm	Metric	Single	Square	AlTiN Coated	30 Degrees	3.3mm	£29.42
D	SME-014-2X	-	0.014"	Decimal Inch	Single	Square	AlTiN Coated	30 Degrees	0.021"	£45.76
G	SEM-250-03	-	1/4"	Fractional Inch	Single	Square	Uncoated	30 Degrees	1/2"	£40.17
E	RMEM-014-2X	-	1.4mm	Metric	Single	Square	AlTiN Coated	30 Degrees	4.2mm	£30.18
H	AELM-030-4X	-	3mm	Metric	Single	Square	AlTiN Coated	30 Degrees	15mm	£58.02
B	SEM-265-04X	-	17/64"	Fractional Inch	Single	Square	AlTiN Coated	30 Degrees	1/2"	£45.48
I	AELM-100-4	-	10mm	Metric	Single	Square	Uncoated	30 Degrees	50mm	£90.32

MICRO 100 -

GEL Series, End Mill

A

B

C

D

E

Style	Model	Diameter	Finish	Length Of Cut	Number Of Flutes	Overall Length	Shank Dia.	Price (inc. VAT)
A	GEL-500-2X	1/2"	AlTiN Coated	3"	2	6"	1/2"	£130.70
B	GEL-500-2	1/2"	Uncoated	3"	2	6"	1/2"	£113.58
C	GEL-250-4	1/4"	Uncoated	1.5"	4	4"	1/4"	£61.00
A	GEL-375-2X	3/8"	AlTiN Coated	1.75"	2	4"	3/8"	£74.47
D	GEL-375-2	3/8"	Uncoated	1.75"	2	4"	3/8"	£71.04
A	GEL-187-2X	3/16"	AlTiN Coated	1.125"	2	3"	3/16"	£41.75
E	GEL-312-4	5/16"	Uncoated	1.625"	4	4"	5/16"	£52.92

MICRO 100 -

GEC Series, End Mill

A

B

C

D

E

F

G

Style	Model	Corner Radius	Diameter	Finish	Length Of Cut	Number Of Flutes	Overall Length	Shank Dia.	Price (inc. VAT)
A	GEC-031-3-005	0.005"	1/32"	Uncoated	5/64"	3	1.5"	1/8"	£29.66
A	GEC-031-3-005X	0.005"	1/32"	AlTiN Coated	5/64"	3	1.5"	1/8"	£37.14
B	GEC-062-4-005	0.005"	1/16"	Uncoated	3/16"	4	1.5"	1/8"	£27.78
B	GEC-093-4-005X	0.005"	3/32"	AlTiN Coated	3/8"	4	1.5"	1/8"	£27.07
A	GEC-062-3-005X	0.005"	1/16"	AlTiN Coated	3/16"	3	1.5"	1/8"	£27.21
C	GEC-062-3-005	0.005"	1/16"	Uncoated	3/16"	3	1.5"	1/8"	£29.28
D	GEC-031-4-005	0.005"	1/32"	Uncoated	5/64"	4	1.5"	1/8"	£29.97
B	GEC-062-4-005X	0.005"	1/16"	AlTiN Coated	3/16"	4	1.5"	1/8"	£32.85
E	GEC-062-2-005	0.005"	1/16"	Uncoated	3/16"	2	1.5"	1/8"	£28.64
B	GEC-031-4-005X	0.005"	1/32"	AlTiN Coated	5/64"	4	1.5"	1/8"	£37.14
E	GEC-500-4-010X	0.01"	1/2"	AlTiN Coated	1"	4	3"	1/2"	£134.38
F	GEC-375-2-010X	0.01"	3/8"	AlTiN Coated	7/8"	2	2.5"	3/8"	£65.07
E	GEC-187-4-010X	0.01"	3/16"	AlTiN Coated	5/8"	4	2"	3/16"	£37.49
D	GEC-187-4-010	0.01"	3/16"	Uncoated	5/8"	4	2"	3/16"	£56.37	RFQ
G	GEC-250-2-010	0.01"	1/4"	Uncoated	3/4"	2	2.5"	1/4"	£53.62
A	GEC-062-3-010	0.01"	1/16"	Uncoated	3/16"	3	1.5"	1/8"	£28.64
B	GEC-375-4-010	0.01"	3/8"	Uncoated	7/8"	4	2.5"	3/8"	£54.50
A	GEC-062-3-010X	0.01"	1/16"	AlTiN Coated	3/16"	3	1.5"	1/8"	£27.21
F	GEC-312-2-010X	0.01"	5/16"	AlTiN Coated	13/16"	2	2.5"	5/16"	£58.68
B	GEC-250-4-010	0.01"	1/4"	Uncoated	3/4"	4	2.5"	1/4"	£42.84
E	GEC-062-4-010X	0.01"	1/16"	AlTiN Coated	3/16"	4	1.5"	1/8"	£35.34
A	GEC-093-3-010	0.01"	3/32"	Uncoated	3/8"	3	1.5"	1/8"	£25.55
B	GEC-375-4-010X	0.01"	3/8"	AlTiN Coated	7/8"	4	2.5"	3/8"	£65.05
E	GEC-093-3-010X	0.01"	3/32"	AlTiN Coated	3/8"	3	1.5"	1/8"	£34.27
E	GEC-312-2-010	0.01"	5/16"	Uncoated	13/16"	2	2.5"	5/16"	£48.95

MICRO 100 -

DMM Drill Point End Mill

A

B

C

Style	Model	Diameter	End	Finish	Length Of Cut	Number Of Flutes	Overall Length	Shank Dia.	Price (inc. VAT)
A	DMM-030-4120	3mm	120 Degrees Included	Uncoated	8mm	4	38mm	3.00mm	£31.61
A	DMM-030-4120X	3mm	120 Degrees Included	AlTiN Coated	8mm	4	38mm	3.00mm	£36.30
B	DMM-030-490	3mm	90 Degrees Included	Uncoated	8mm	4	38mm	3.00mm	£35.04
B	DMM-030-2120	3mm	120 Degrees Included	Uncoated	8mm	2	38mm	3.00mm	£33.61
B	DMM-030-290	3mm	90 Degrees Included	Uncoated	8mm	2	38mm	3.00mm	£33.61
B	DMM-030-290X	3mm	90 Degrees Included	AlTiN Coated	8mm	2	38mm	3.00mm	£30.21
B	DMM-030-490X	3mm	90 Degrees Included	AlTiN Coated	8mm	4	38mm	3.00mm	£35.86
B	DMM-040-490X	4mm	90 Degrees Included	AlTiN Coated	11mm	4	50mm	4.00mm	£49.16
B	DMM-040-490	4mm	90 Degrees Included	Uncoated	11mm	4	50mm	4.00mm	£46.85
B	DMM-040-2120X	4mm	120 Degrees Included	AlTiN Coated	11mm	2	50mm	4.00mm	£43.45
B	DMM-040-2120	4mm	120 Degrees Included	Uncoated	11mm	2	50mm	4.00mm	£41.50
B	DMM-040-290	4mm	90 Degrees Included	Uncoated	11mm	2	50mm	4.00mm	£47.02
B	DMM-040-290X	4mm	90 Degrees Included	AlTiN Coated	11mm	2	50mm	4.00mm	£47.33
B	DMM-040-4120	4mm	120 Degrees Included	Uncoated	11mm	4	50mm	4.00mm	£49.11
A	DMM-050-290	5mm	90 Degrees Included	Uncoated	13mm	2	57mm	6.00mm	£48.38
C	DMM-050-2120	5mm	120 Degrees Included	Uncoated	13mm	2	57mm	6.00mm	£42.60
A	DMM-050-2120X	5mm	120 Degrees Included	AlTiN Coated	13mm	2	57mm	6.00mm	£60.77
B	DMM-050-290X	5mm	90 Degrees Included	AlTiN Coated	13mm	2	57mm	6.00mm	£60.77
C	DMM-060-290	6mm	90 Degrees Included	Uncoated	16mm	2	57mm	6.00mm	£49.53
A	DMM-060-290X	6mm	90 Degrees Included	AlTiN Coated	16mm	2	57mm	6.00mm	£58.63
C	DMM-060-2120X	6mm	120 Degrees Included	AlTiN Coated	16mm	2	57mm	6.00mm	£50.35
A	DMM-060-490X	6mm	90 Degrees Included	AlTiN Coated	16mm	4	57mm	6.00mm	£57.31
B	DMM-060-2120	6mm	120 Degrees Included	Uncoated	16mm	2	57mm	6.00mm	£52.58
B	DMM-080-4120	8mm	120 Degrees Included	Uncoated	22mm	4	63mm	8.00mm	£60.69
B	DMM-080-4120X	8mm	120 Degrees Included	AlTiN Coated	22mm	4	63mm	8.00mm	£73.04

MICRO 100 -

DM Drill Point End Mill

A

B

C

D

E

F

G

Style	Model	Diameter	Finish	Length Of Cut	Number Of Flutes	Overall Length	Shank Dia.	Price (inc. VAT)
A	DM-500-290X	1/2"	AlTiN Coated	1"	2	3"	1/2"	£129.42
B	DM-500-290	1/2"	Uncoated	1"	2	3"	1/2"	£108.03
A	DM-500-490	1/2"	Uncoated	1"	4	3"	1/2"	£126.98
B	DM-500-490X	1/2"	AlTiN Coated	1"	4	3"	1/2"	£133.35
C	DM-250-290X	1/4"	AlTiN Coated	3/4"	2	2.5"	1/4"	£52.62
D	DM-250-490X	1/4"	AlTiN Coated	3/4"	4	2.5"	1/4"	£66.07
E	DM-250-290	1/4"	Uncoated	3/4"	2	2.5"	1/4"	£45.79
A	DM-250-490	1/4"	Uncoated	3/4"	4	2.5"	1/4"	£51.64
F	DM-125-490	1/8"	Uncoated	1/2"	4	1.5"	1/8"	£33.49
D	DM-125-490X	1/8"	AlTiN Coated	1/2"	4	1.5"	1/8"	£28.55
C	DM-125-290X	1/8"	AlTiN Coated	1/2"	2	1.5"	1/8"	£31.47
E	DM-125-290	1/8"	Uncoated	1/2"	2	1.5"	1/8"	£31.32
B	DM-750-290X	3/4"	AlTiN Coated	1.5"	2	4"	3/4"	£349.53
A	DM-750-490X	3/4"	AlTiN Coated	1.5"	4	4"	3/4"	£327.62
A	DM-750-290	3/4"	Uncoated	1.5"	2	4"	3/4"	£343.69
B	DM-750-490	3/4"	Uncoated	1.5"	4	4"	3/4"	£331.81
G	DM-375-490	3/8"	Uncoated	1"	4	2.5"	3/8"	£81.23
E	DM-375-290	3/8"	Uncoated	1"	2	2.5"	3/8"	£67.89
C	DM-375-290X	3/8"	AlTiN Coated	1"	2	2.5"	3/8"	£87.89
D	DM-375-490X	3/8"	AlTiN Coated	1"	4	2.5"	3/8"	£84.49
E	DM-187-290	3/16"	Uncoated	5/8"	2	2"	3/16"	£39.45
F	DM-187-490	3/16"	Uncoated	5/8"	4	2"	3/16"	£46.69
C	DM-187-290X	3/16"	AlTiN Coated	5/8"	2	2"	3/16"	£40.53
D	DM-187-490X	3/16"	AlTiN Coated	5/8"	4	2"	3/16"	£45.79
B	DM-625-490	5/8"	Uncoated	1.25"	4	3.5"	5/8"	£231.49

MICRO 100 -

GEM Series, End Mill
Micro 100 GEM Series end mills are designed to remove material from workpieces, creating complex shapes and achieving surface finishes. The GEM Series End Mills are used in milling, slotting and profiling operations on materials, including metals, composites and plastics. They have 4 flutes for efficient material removal and smoother cuts. These end mills feature solid carbide construction for wear resistance and toughness. The AlTiN coating on these mills reduce friction, heat & tool wear and improve tool life and performance. These end mills have a cutting edge that allows them to plunge and start cutting from the centre. They are available in 1.5, 2, 2.5, 3, 3.5 and 4 inch length variants.

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Style	Model	Diameter	Finish	Length Of Cut	Number Of Flutes	Overall Length	Shank Dia.	Price (inc. VAT)
A	GEM-001-4	1"	Uncoated	1.5"	4	4"	1"	£357.13
B	GEM-500-3	1/2"	Uncoated	1"	3	3"	1/2"	£89.68
B	GEM-500-2	1/2"	Uncoated	1"	2	3"	1/2"	£88.26
C	GEM-500-2X	1/2"	AlTiN Coated	1"	2	3"	1/2"	£98.99
D	GEM-500-4X	1/2"	AlTiN Coated	1"	4	3"	1/2"	£98.57
A	GEM-500-4	1/2"	Uncoated	1"	4	3"	1/2"	£88.00
E	GEM-500-3X	1/2"	AlTiN Coated	1"	3	3"	1/2"	£99.18
F	GEM-250-3	1/4"	Uncoated	3/4"	3	2.5"	1/4"	£38.64
F	GEM-250-2	1/4"	Uncoated	3/4"	2	2.5"	1/4"	£42.41
G	GEM-250-2X	1/4"	AlTiN Coated	3/4"	2	2.5"	1/4"	£42.68
G	GEM-250-3X	1/4"	AlTiN Coated	3/4"	3	2.5"	1/4"	£42.68
H	GEM-250-4	1/4"	Uncoated	3/4"	4	2.5"	1/4"	£38.24
H	GEM-250-4X	1/4"	AlTiN Coated	3/4"	4	2.5"	1/4"	£45.80
I	GEM-125-4	1/8"	Uncoated	1/2"	4	1.5"	1/8"	£19.84
J	GEM-125-4X	1/8"	AlTiN Coated	1/2"	4	1.5"	1/8"	£22.96
K	GEM-125-3	1/8"	Uncoated	1/2"	3	1.5"	1/8"	£17.62
K	GEM-125-2	1/8"	Uncoated	1/2"	2	1.5"	1/8"	£17.87
L	GEM-125-2X	1/8"	AlTiN Coated	1/2"	2	1.5"	1/8"	£23.61
L	GEM-125-3X	1/8"	AlTiN Coated	1/2"	3	1.5"	1/8"	£23.51
M	GEM-062-2X	1/16"	AlTiN Coated	3/16"	2	1.5"	1/8"	£25.63
N	GEM-062-3X	1/16"	AlTiN Coated	3/16"	3	1.5"	1/8"	£28.31
N	GEM-062-3	1/16"	Uncoated	3/16"	3	1.5"	1/8"	£22.16
O	GEM-062-4X	1/16"	AlTiN Coated	3/16"	4	1.5"	1/8"	£25.75
P	GEM-062-4	1/16"	Uncoated	3/16"	4	1.5"	1/8"	£24.20
M	GEM-062-2	1/16"	Uncoated	3/16"	2	1.5"	1/8"	£20.72

MICRO 100 -

GELM Series, End Mill

A

B

C

Style	Model	Diameter	Finish	Length Of Cut	Number Of Flutes	Overall Length	Shank Dia.	Price (inc. VAT)
A	GELM-040-2X	4mm	AlTiN Coated	25mm	2	75mm	4.00mm	£42.02
B	GELM-060-4	6mm	Uncoated	25mm	4	75mm	6.00mm	£48.54
C	GELM-060-3	6mm	Uncoated	25mm	3	75mm	6.00mm	£48.23
C	GELM-080-3	8mm	Uncoated	30mm	3	75mm	8.00mm	£57.73
C	GELM-100-3X	10mm	AlTiN Coated	38mm	3	100mm	10.00mm	£87.74

MICRO 100 -

GEMM Series, End Mill

A

B

C

Style	Model	Diameter	Finish	Length Of Cut	Number Of Flutes	Overall Length	Shank Dia.	Price (inc. VAT)
A	GEMM-010-3	1mm	Uncoated	3mm	3	38mm	3.00mm	£22.87
B	GEMM-010-2X	1mm	AlTiN Coated	3mm	2	38mm	3.00mm	£26.70
B	GEMM-010-2	1mm	Uncoated	3mm	2	38mm	3.00mm	£23.26
A	GEMM-010-3X	1mm	AlTiN Coated	3mm	3	38mm	3.00mm	£24.47
C	GEMM-010-4	1mm	Uncoated	3mm	4	38mm	3.00mm	£23.53
B	GEMM-020-2X	2mm	AlTiN Coated	6mm	2	38mm	3.00mm	£24.73
B	GEMM-020-2	2mm	Uncoated	6mm	2	38mm	3.00mm	£20.79
C	GEMM-020-4	2mm	Uncoated	7mm	4	38mm	3.00mm	£20.89
C	GEMM-020-4X	2mm	AlTiN Coated	7mm	4	38mm	3.00mm	£24.80
A	GEMM-030-3X	3mm	AlTiN Coated	7mm	3	38mm	3.00mm	£20.45
A	GEMM-030-3	3mm	Uncoated	7mm	3	38mm	3.00mm	£18.71
B	GEMM-030-2	3mm	Uncoated	7mm	2	38mm	3.00mm	£18.70
C	GEMM-030-4	3mm	Uncoated	8mm	4	38mm	3.00mm	£18.91
B	GEMM-030-2X	3mm	AlTiN Coated	7mm	2	38mm	3.00mm	£22.65
C	GEMM-040-4	4mm	Uncoated	11mm	4	50mm	4.00mm	£28.05
B	GEMM-040-2	4mm	Uncoated	8mm	2	50mm	4.00mm	£28.53
A	GEMM-040-3	4mm	Uncoated	8mm	3	50mm	4.00mm	£27.79
B	GEMM-050-2	5mm	Uncoated	10mm	2	50mm	5.00mm	£30.50
C	GEMM-050-4	5mm	Uncoated	13mm	4	50mm	5.00mm	£29.64
C	GEMM-060-4	6mm	Uncoated	13mm	4	57mm	6.00mm	£34.94
B	GEMM-060-2	6mm	Uncoated	10mm	2	57mm	6.00mm	£34.73
A	GEMM-060-3	6mm	Uncoated	10mm	3	57mm	6.00mm	£34.87
B	GEMM-060-2X	6mm	AlTiN Coated	10mm	2	57mm	6.00mm	£37.35
C	GEMM-080-4	8mm	Uncoated	19mm	4	63mm	8.00mm	£43.06
B	GEMM-080-2X	8mm	AlTiN Coated	16mm	2	63mm	8.00mm	£51.73

MICRO 100 -

HMCM Series, End Mill

A

B

C

Style	Model	Corner Radius	Diameter	Finish	Length Of Cut	Overall Length	Shank Dia.	Price (inc. VAT)
A	HMCM-0405-4	0.5mm	4mm	Uncoated	11mm	57mm	6.00mm	£97.07
A	HMCM-0805-4X	0.5mm	8mm	AlTiN Coated	19mm	75mm	8.00mm	£125.86
A	HMCM-1005-4X	0.5mm	10mm	AlTiN Coated	22mm	80mm	10.00mm	£134.29
A	HMCM-0305-4X	0.5mm	3mm	AlTiN Coated	8mm	57mm	6.00mm	£137.86
A	HMCM-1005-4	0.5mm	10mm	Uncoated	22mm	80mm	10.00mm	£124.30
B	HMCM-2010-4X	1.0mm	20mm	AlTiN Coated	38mm	125mm	20.00mm	£502.83
C	HMCM-0510-4X	1.0mm	5mm	AlTiN Coated	13mm	57mm	6.00mm	£119.11
A	HMCM-0610-4X	1.0mm	6mm	AlTiN Coated	13mm	57mm	6.00mm	£110.99

MICRO 100 -

GLRM Series, End Mill

A

B

C

Style	Model	Diameter	Finish	Length Of Cut	Neck Dia.	Neck Length	Number Of Flutes	Overall Length	Shank Dia.	Price (inc. VAT)
A	GLRM-020-2X	2mm	AlTiN Coated	5mm	1.50mm	15mm	2	57mm	6.00mm	£46.77
B	GLRM-020-4	2mm	Uncoated	5mm	1.50mm	15mm	4	57mm	6.00mm	£34.57
C	GLRM-030-2X	3mm	AlTiN Coated	8mm	2.50mm	30mm	2	75mm	6.00mm	£60.16
A	GLRM-030-2	3mm	Uncoated	8mm	2.50mm	30mm	2	75mm	6.00mm	£46.54
B	GLRM-030-4	3mm	Uncoated	8mm	2.50mm	30mm	4	75mm	6.00mm	£44.44
C	GLRM-040-2X	4mm	AlTiN Coated	8mm	3.50mm	30mm	2	75mm	6.00mm	£59.79
B	GLRM-040-4X	4mm	AlTiN Coated	8mm	3.50mm	30mm	4	75mm	6.00mm	£60.16
A	GLRM-050-2	5mm	Uncoated	10mm	4.50mm	50mm	2	100mm	6.00mm	£47.95
C	GLRM-060-2	6mm	Uncoated	12mm	5.50mm	50mm	2	100mm	6.00mm	£57.39
B	GLRM-060-4	6mm	Uncoated	12mm	5.50mm	50mm	4	100mm	6.00mm	£47.73
C	GLRM-100-2	10mm	Uncoated	18mm	9.50mm	65mm	2	120mm	10.00mm	£83.98
C	GLRM-100-2X	10mm	AlTiN Coated	18mm	9.50mm	65mm	2	120mm	10.00mm	£98.45
B	GLRM-120-4	12mm	Uncoated	22mm	11.50mm	80mm	4	130mm	12.00mm	£106.05

MICRO 100 -

GLR Series, End Mill

A

B

C

Style	Model	Diameter	Finish	Length Of Cut	Neck Dia.	Neck Length	Number Of Flutes	Overall Length	Shank Dia.	Price (inc. VAT)
A	GLR-375-2	3/8"	Uncoated	3/4"	0.355"	2.75"	2	4"	3/8"	£74.19
B	GLR-187-2	3/16"	Uncoated	3/8"	0.167"	2"	2	3"	3/16"	£53.52
C	GLR-187-4X	3/16"	AlTiN Coated	3/8"	0.167"	2"	4	3"	3/16"	£56.41
C	GLR-312-4X	5/16"	AlTiN Coated	5/8"	0.292"	2.625"	4	4"	5/16"	£84.74

MICRO 100 -

High Performance Roughing/Finishing Coated Carbide Corner Radius End Mills

A

B

C

D

E

Style	Model	Price (inc. VAT)
A	VHMM-040-5K	£46.68
B	VHSM-060-5K	£49.09
B	VHSM-040-5K	£40.17
A	VHMM-120-5K	£111.11
B	VHSM-120-5K	£99.37
B	VHSM-100-5K	£75.05
C	VHS-312-5-020K	£62.81
D	VLM-312-5-020K	£72.56
C	VHS-500-5-090K	£107.86
A	VHMM-080-5K	£65.04
A	VHM-375-5-020K	£72.49
A	VHMM-060-5K	£53.45
C	VHS-375-5-020K	£66.26
E	VLR-375-5-020K	£121.29
C	VHS-500-5-030K	£107.83
E	VLR-500-5-030K	£213.02
E	VLR-500-5-090K	£212.50
E	VLR-500-5-125K	£207.95
D	VLM-500-5-090K	£147.40
D	VLM-375-5-020K	£87.35
B	VHSM-080-5K	£59.55

MICRO 100 -

General Purpose Finishing Coated Carbide Corner Radius End Mills

A

Style	Model	Price (inc. VAT)
A	GEC-250-2-010X	-	RFQ
A	AECM-1215-2X	£106.56
A	AECM-1215-3X	£106.56
A	GEC-031-2-005X	£32.95

MICRO 100 -

High Performance Finishing Carbide Square End Mills

A

B

Style	Model	Price (inc. VAT)
A	SDHM-180-3X	£250.76
A	SDHM-200-3X	£322.27
B	ARMM-140-5X	£170.95
B	ARMM-180-5X	£282.51

MICRO 100 -

Miniature General Purpose Carbide Square End Mills

A

Style	Model	Price (inc. VAT)
A	MEF-075-600	£51.27
A	MEF-020-250	£48.42
A	MEF-015-100	£60.83
A	MEF-015-200	£64.67
A	MEF-025-250	£47.27
A	MEF-015-023	£52.84
A	MEF-030-045	£35.27
A	MEF-025-038	£38.59
A	MEF-031-047	£35.27
A	MEF-031-375	£49.84
A	MEF-030-375	£48.41
A	MEF-031-100	£42.40
A	MEF-030-100	£43.37
A	MEF-031-200	£43.97
A	MEF-045-150	£43.37
A	MEF-030-200	£45.01
A	MEF-060-350	£46.76
A	MEF-060-500	£51.27
A	MEF-050-075	£34.07
A	MEF-047-071	£35.27
A	MEF-060-750	£61.17
A	MEF-047-150	£42.40
A	MEF-050-300	£44.61
A	MEF-060-200	£43.55
A	MEF-045-068	£35.27

MICRO 100 -

Miniature High Performance Carbide Square End Mills

A

B

Style	Model	Price (inc. VAT)
A	MEF-045-250K	£49.36
A	MEF-047-250K	£49.36
A	MEF-050-550K	£58.16
A	MEF-050-300K	£52.54
A	MEF-060-750K	£67.16
A	MEF-047-500K	£56.96
A	MEF-075-250K	£47.83
A	MEF-075-113K	£41.37
A	MEF-075-900K	£69.57
A	MEF-075-400K	£50.94
A	MEF-093-750K	£60.15
A	MEF-093-1000K	£67.40
A	MEF-093-500K	£50.80
A	MEF-090-900K	£64.10
A	MEF-060-090K	£41.26
A	MEF-090-400K	£50.70
A	MEF-090-250K	£48.26
A	MEF-078-250K	£50.29
A	MEF-078-900K	£67.27
A	MEF-078-650K	£59.28
A	MEF-078-400K	£51.04
A	MEF-040-250K	£53.47
A	MEF-047-071K	£41.26
A	MEF-040-500K	£63.51
B	MEF-125-1000K	£65.67

MICRO 100 -

High Performance Roughing/Finishing Carbide Square End Mills

A

B

C

D

E

F

Style	Model	Price (inc. VAT)
A	VLM-500-5K	£143.16
B	VHM-500-5K	£136.78
C	VLR-500-5K	£210.80
D	VHS-500-5K	£113.13
B	VHM-250-5	£50.35
C	VLR-250-5K	£81.59
E	VHS-250-5	£42.43
B	VHM-750-5	£285.02
C	VLR-375-5K	£123.06
F	VHM-625-5K	£192.29

MICRO 100 -

High Performance Roughing/Finishing Bright Finish Carbide Corner Radius End Mills

A

B

C

D

E

Style	Model	Price (inc. VAT)
A	VLR-500-5-060	£192.89
B	VHS-375-5-020	£55.55
B	VHS-500-5-090	£91.55
C	VHMM-080-5	£53.34
D	VHSM-080-5	£47.87
C	VHMM-060-5	£45.36
D	VHSM-060-5	£42.94
C	VHM-625-5-060	£186.48
A	VLR-312-5-020	£76.47
B	VHS-312-5-020	£51.57
D	VHSM-040-5	£34.53
C	VHMM-040-5	£37.60
A	VLR-375-5-020	£109.16
C	VHM-500-5-125	£102.12
E	VLM-375-5-020	£78.20
C	VHM-750-5-125	£283.21
B	VHS-250-5-020	£43.20
E	VLM-250-5-020	£58.38
B	VHS-500-5-030	£91.89
C	VHMM-120-5	£94.37
E	VLM-500-5-060	£133.04
A	VLR-500-5-090	£192.17
A	VLR-500-5-030	£194.85
E	VLM-500-5-090	£132.20
D	VHSM-120-5	£85.62

MICRO 100 -

High Performance Roughing Carbide Corner Radius End Mills

A

B

Style	Model	Price (inc. VAT)
A	ARC-750-5-020X	£324.67
B	ARC-625-5-090X	£217.78

MICRO 100 -

High Performance Finishing Coated Carbide Corner Radius End Mills

A

B

Style	Model	Price (inc. VAT)
A	VHMM-250-4X	£465.28
B	HMCM-2020-4X	£528.62
B	HMCM-1610-4X	£384.84
B	HMCM-2015-4X	£528.62
B	HMCM-0815-4X	£132.66
B	HMCM-1215-4X	£184.69
B	HMCM-1210-4X	£184.69
B	HMCM-1205-4X	£184.69
B	HMCM-1620-4X	£384.84
B	HMCM-2030-4X	£528.62

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

MICRO 100 Carbide End Mills

Right-handed carbide end mills widely used in slotting, roughing, profiling and finishing applications. Available in both metric and SAE dimensions with options in 2- and 4-flute variants

Non Center Carbide End Mill

Center Carbide End Mill

GEL Series, End Mill

GEC Series, End Mill

DMM Drill Point End Mill

DM Drill Point End Mill

GELM Series, End Mill

GEMM Series, End Mill

HMCM Series, End Mill

GLRM Series, End Mill

GLR Series, End Mill

High Performance Roughing/Finishing Coated Carbide Corner Radius End Mills

General Purpose Finishing Coated Carbide Corner Radius End Mills

High Performance Finishing Carbide Square End Mills

Miniature General Purpose Carbide Square End Mills

Miniature High Performance Carbide Square End Mills

High Performance Roughing/Finishing Carbide Square End Mills

High Performance Roughing/Finishing Bright Finish Carbide Corner Radius End Mills

High Performance Roughing Carbide Corner Radius End Mills

High Performance Finishing Coated Carbide Corner Radius End Mills

We are here to help!

Looking for a part not listed here?

Explore More

Select your cookie preferences

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

MICRO 100 Carbide End Mills Right-handed carbide end mills widely used in slotting, roughing, profiling and finishing applications. Available in both metric and SAE dimensions with options in 2- and 4-flute variants

We are here to help!

Looking for a part not listed here?

Explore More

MICRO 100 Carbide End Mills

Right-handed carbide end mills widely used in slotting, roughing, profiling and finishing applications. Available in both metric and SAE dimensions with options in 2- and 4-flute variants