Cable Support Grips

Filter
HUBBELL WIRING DEVICE-KELLEMS -

Liquid Tight Cable Grips

StyleModelItemPrice (inc. VAT)
ASHCM201022Cable Grip£13.00
BSECM16BCord Connector£2.97
RACO -

Liquid Tight Cable Grips

StyleModelPrice (inc. VAT)
A4804-2£25.29
B3722-1£11.62
C4702-6£16.90
D4702-4£16.90
E3794-3£19.03
F3792-2£10.71
G4803-5£25.45
H4803-2£19.29
I4801-4£22.71
J4801-3£23.16
K4801-0£21.99
L4804-1£26.26
M3723-3£12.01
N3703-1£11.39
O3704-1£17.02
P3796-0£37.66
Q3745-3£17.04
R4802-5£23.35
S4804-0£27.00
T3703-2£11.63
U4703-2£21.03
V4704-3£29.87
W3704-2£19.67
X4702-1£17.41
Y3795-3£22.39
HUBBELL WIRING DEVICE-KELLEMS -

Support Grips, Single Eye, Rod Closing

Hubbell Wiring Device-Kellems cable support mesh grips are used with fibre-optic cables to absorb vibration & relieve tension. These CSA certified grips feature tin-coated bronze / stainless steel construction for structural rigidity and resisting corrosion on exposed surfaces. They are used when cable ends are not accessible and provide breaking strengths up to 5750 lb. Choose from a wide range of these rod closing cable support grips, available in eye lengths ranging from 3 to 24 inches.

StyleModelBreaking StrengthEye LengthItemMaterialStyleTypePrice (inc. VAT)
A022291017300 Lb.3"Support Grip, Fiber Optic CableTin Coated BronzeSplit Mesh Rod ClosingSingle Eye Single Weave£62.11
B02203013530 Lb.7"Cable Support GripTin-coated bronzeSplit, Rod ClosingSingle Eye£73.75
B02203014790 Lb.8"Cable Support GripTin-coated bronzeSplit, Rod ClosingSingle Eye£92.98
B022030151020 Lb.8"Cable Support GripTin-coated bronzeSplit, Rod ClosingSingle Eye£84.70
C024030151020 Lb.8"Support GripStainless SteelSplit Mesh Rod ClosingSingle Eye Single Weave£120.81
B022030191610 Lb.12"Cable Support GripTin-coated bronzeSplit, Rod ClosingSingle Eye£107.76
B022030181610 Lb.10"Cable Support GripTin-coated bronzeSplit, Rod ClosingSingle Eye£106.87
C024030171610 Lb.9"Support GripStainless SteelSplit Mesh Rod ClosingSingle Eye Single Weave£127.41
C024030181610 Lb.10"Support GripStainless SteelSplit Mesh Rod ClosingSingle Eye Single Weave£145.67
C024030191610 Lb.12"Support GripStainless SteelSplit Mesh Rod ClosingSingle Eye Single Weave£156.41
B022030171610 Lb.9"Cable Support GripTin-coated bronzeSplit, Rod ClosingSingle Eye£91.02
B022030202150 Lb.14"Cable Support GripTin-coated bronzeSplit, Rod ClosingSingle Eye£151.76
B022030213260 Lb.16"Cable Support GripTin-coated bronzeSplit, Rod ClosingSingle Eye£168.95
B022030223260 Lb.18"Cable Support GripTin-coated bronzeSplit, Rod ClosingSingle Eye£192.63
D22030245750 lb.24"Cable Support GripTin Coated BronzeSingle-£296.77
HUBBELL WIRING DEVICE-KELLEMS -

Support Grips, Single Eye, Closed Mesh

Hubbell Wiring Device-Kellems closed mesh cable support grips are designed for permanent installations that allow access to a cable end. These CSA certified grips feature tin-coated bronze / stainless steel / galvanised steel construction to ensure wear & corrosion resistance. They have higher grip strength than lace closing or rod closing mesh grips and can withstand loads up to 4900 lb. Choose from a wide range of these closed mesh cable support grips, available in eye lengths ranging from 3 to 24 inches.

StyleModelBreaking StrengthEye LengthItemMaterialStyleTypePrice (inc. VAT)
A02216002290 Lb.5"Support GripTin Coated BronzeClosed MeshSingle Eye Single Weave£24.27
B02416002290 Lb.5"Support GripStainless SteelClosed MeshSingle Eye Single Weave£38.94
B02416001290 Lb.3"Support GripStainless SteelClosed MeshSingle Eye Single Weave£36.09
C073041276350 Lb.3"Cable Support GripStainless SteelSingle-£26.85
C073041277450 Lb.4"Cable Support GripGalvanized SteelSingle-£28.03
A02216004500 lb.5.5"Support GripTin Coated BronzeClosed MeshSingle Eye Single Weave£32.77
A02216003500 lb.5.5"Support GripTin Coated BronzeClosed MeshSingle Eye Single Weave£28.24
D02401013530 Lb.7"Support GripStainless SteelClosed MeshSingle Eye Single Weave£75.74
E02201013530 Lb.7"Cable Support GripTin-coated bronzeClosedSingle Eye£64.54
C073041278550 Lb.6"Cable Support GripStainless SteelSingle-£35.27
A02216005660 Lb.6"Support GripTin Coated BronzeClosed MeshSingle Eye Single Weave£35.98
A02216006790 Lb.7"Support GripTin Coated BronzeClosed MeshSingle Eye Single Weave£36.97
A02216008790 Lb.7"Support GripTin Coated BronzeClosed MeshSingle Eye Single Weave£41.23
E02201014790 Lb.8"Cable Support GripTin-coated bronzeClosedSingle Eye£71.18
D02401014790 Lb.8"Support GripStainless SteelClosed MeshSingle Eye Single Weave£99.82
C0730412791000 lb.7"Cable Support GripStainless SteelSingle-£41.07
E022010151020 Lb.8"Cable Support GripTin-coated bronzeClosedSingle Eye£77.02
D024010151020 Lb.8"Support GripStainless SteelClosed MeshSingle Eye Single Weave£95.88
C0730412811400 Lb.8"Cable Support GripStainless SteelSingle-£49.22
C0730412801400 Lb.7"Cable Support GripStainless SteelSingle-£51.18
C0730412821500 lb.9"Cable Support GripStainless SteelSingle-£46.54
E022010171610 Lb.9"Cable Support GripTin-coated bronzeClosedSingle Eye£80.03
E022010191610 Lb.12"Cable Support GripTin-coated bronzeClosedSingle Eye£94.60
E022010181610 Lb.10"Cable Support GripTin-coated bronzeClosedSingle Eye£75.10
D024010181610 Lb.10"Support GripStainless SteelClosed MeshSingle Eye Single Weave£123.52
HUBBELL WIRING DEVICE-KELLEMS -

Support Grips, Double Eye, Single Weave, Split Mesh

Hubbell Wiring Device-Kellems double eye, split mesh cable support grips are ideal for temporary installations when a cable end is not accessible. These grips are made of tin coated bronze for excellent solderability and decent contact resistance. They provide quicker installation than lace closing grips and are capable of withstanding loads up to 1610 lb. Variants are available in eye lengths of 4 and 5 inches. Raptor Supplies also offers single eye lace closing grips providing breaking strengths up to 4900 lb.

StyleModelBreaking StrengthEye LengthPrice (inc. VAT)
A022030031020 Lb.4"£90.34
A022030051610 Lb.5"£97.13
A022030071610 Lb.5"£124.73
A022030061610 Lb.5"£110.27
HUBBELL WIRING DEVICE-KELLEMS -

Offset Eye, Closed Mesh

StyleModelBreaking StrengthEye LengthPrice (inc. VAT)
A02201037500 lb.4"£47.53
A02201038750 lb.4"£51.33
A02201039950 Lb.4"£51.15
A022010421500 lb.5"£68.39
A022010411500 lb.5"£66.28
A022010431500 lb.5"£88.13
A022010442000 Lb.6"£109.13
A022010453100 Lb.9"£130.76
HUBBELL WIRING DEVICE-KELLEMS -

Wire Management Cable Support Grips, Double Eye, Closed Mesh

Hubbell Wiring Device-Kellems double eye, closed mesh cable support grips are ideal for permanent installations when there is access to the ends of the cables. They feature tin coated bronze construction to withstand corrosion & offer high ductility and have a strong grip. These grips are configured with double eyes to pull out the grips after inserting the cable ends and can handle runs of cable with a single weave. They are integrated with strand equaliser position wires for equal loading and closed mesh grips, ensuring secure attachments. Variants are available in eye lengths of 4 and 5 inches.

StyleModelBreaking StrengthEye LengthPrice (inc. VAT)
A02201002790 Lb.4"£61.72
A022010031020 Lb.4"£62.31
A022010051610 Lb.5"£74.38
A022010071640 Lb.5"£89.51
HUBBELL WIRING DEVICE-KELLEMS -

Support Grips, Offset Eye, Rod Closing

Hubbell Wiring Device-Kellems offset eye, single weave support grips are placed over cables to support them in vertical runs & bends. These strain relief grips feature tin-coated bronze construction for excellent solderability and wear resistance. They provide quicker installation than lace closing grips and come integrated with strand equaliser position wires for uniform loading throughout the grip length. With a maximum breaking strength of 2000 lb, these grips are available in eye lengths of 4, 5 & 6 inches. Raptor Supplies also offers lace closing support grips providing breaking strengths up to 4900 lb.

StyleModelBreaking StrengthEye LengthPrice (inc. VAT)
A02203037500 lb.4"£72.85
A02203038750 lb.4"£71.90
A02203039950 Lb.4"£84.57
A022030411500 lb.5"£90.22
B022030421500 lb.5"£93.06
B022030431500 lb.5"£104.04
B022030442000 Lb.6"£123.90
HUBBELL WIRING DEVICE-KELLEMS -

Strain Relief Grips, Wire Mesh

Hubbell Wiring Device-Kellems I-grip cable mesh supports can be easily placed over a cable and attached to the plug body to provide strain relief and control cable bend. These supports feature eye tabs that fit under the nylon cord clamp and screws that slide through the eyelets, securing the grip in place. They are UL listed and made of galvanised steel to offer breaking strength up to 1500 lb.

StyleModelBreaking StrengthEye LengthTrade SizePrice (inc. VAT)
A07310001450 Lb.1.25"1.25"£61.24
A07310002550 Lb.1.25"1.25"£62.68
A073100031000 lb.1.5"1.5"£69.40
A073100041400 Lb.1.5"1.5"£71.47
A073100051400 Lb.1.5"1.5"£75.73
A073100061500 lb.1.5"1.5"£74.17
HARTING -

Liquid Tight Cable Grips

StyleModelPrice (inc. VAT)
A19000005094£62.19
B19000005182£24.30
A19000005081£27.87
A19000005095£80.32
B19000005180£26.34
A19000005084£46.70
A19000005082£22.45
A19000005091£51.31
A19000005092£39.64
A19000005080-
RFQ
A19000005090£46.11
A19000005096£71.73
A19000005098£116.42
WOODHEAD -

130097 Series Cable Support Grip

StyleModelCable Dia.Thread Size
A1300970334.5-.625"1" NPT
RFQ
B1300970266.7-.97"1" NPT
RFQ
A1300970337.75-.875"1" NPT
RFQ
B1300970270.94-1.25"1 1/4" NPT
RFQ
A1300970335.625-.75"1" NPT
RFQ
A1300970336.687-.812"1" NPT
RFQ
A1300970338.875-1"1" NPT
RFQ
PASS AND SEYMOUR -

Flexcor Series Double Weave, Long Length, Split Lace, Offset Eye Pulling Grips

StyleModelCable Dia.
ASSK10021 To 1.24"
RFQ
BSSK15021.5 To 1.74"
RFQ
CSSK12521.25 To 1.49"
RFQ
DSSK20022 To 2.49"
RFQ
ESSK25022.5 To 2.99"
RFQ
FSSK30023 To 3.49"
RFQ
PASS AND SEYMOUR -

Flexcor Series Cord Grips

StyleModelCable SizeConstruction
ACG30018127--
RFQ
BCG101845--
RFQ
CCGN50900620.062 To 0.125"Nylon
RFQ
DCGN500620.062 To 0.125"Nylon
RFQ
DCGN250750.075 To 0.135"Nylon
RFQ
DCGN252000.2 To 0.265"Nylon
RFQ
ECG50905620.5 To 0.56"Aluminum
RFQ
ECG75905620.5 To 0.56"Aluminum
RFQ
ACG7556220.5 To 0.56"Aluminum
RFQ
ACG5056230.5 To 0.56"Aluminum
RFQ
FCGSS506250.5 To 0.56"Stainless Steel
RFQ
ACG5056220.5 To 0.56"Aluminum
RFQ
GCG50455620.5 To 0.56"Aluminum
RFQ
ACG7556240.5 To 0.56"Aluminum
RFQ
FCGSS756250.5 To 0.56"Stainless Steel
RFQ
ACG7556230.5 To 0.56"Aluminum
RFQ
GCG75455620.5 To 0.56"Aluminum
RFQ
CCGN50905000.5 To 0.562"Nylon
RFQ
DCGN505000.5 To 0.562"Nylon
RFQ
CCGN75905620.5 To 0.625"Nylon
RFQ
DCGN755620.5 To 0.625"Nylon
RFQ
CCGN100905000.5 To 0.625"Nylon
RFQ
DCGN1005000.5 To 0.625"Nylon
RFQ
ACG5018810.12 To 0.18"Aluminum
RFQ
ACG5018820.12 To 0.18"Aluminum
RFQ
WOODHEAD -

130097 Series Strain Relief Cord Grip

StyleModelCable Dia.Grommet ColorThread Size
A1300970326.5-.562"Black1/2" NPT
RFQ
A1300970330.5-.625"Gray3/4" NPT
RFQ
A1300970340.25-.375"Green3/4" NPT
RFQ
A1300970322.25-.375"Black1/2" NPT
RFQ
A1300970321.187-.25"Orange1/2" NPT
RFQ
A1300970323.312-.375"Gray1/2" NPT
RFQ
A1300970324.375-.437"Green1/2" NPT
RFQ
A1300970341.375-.437"Green3/4" NPT
RFQ
A1300970329.437-.562"Black3/4" NPT
RFQ
A1300970328.562-.625"-1/2" NPT
RFQ
B1300970331.562-.687"Green3/4" NPT
RFQ
A1300970332.625-.75"Orange3/4" NPT
RFQ
A1300970333.687-.812"-3/4" NPT
RFQ
A130097032511.1-.437-.5"Orange1/2" NPT
RFQ
HUBBELL WIRING DEVICE-KELLEMS -

Support Grips, Single Eye

Hubbell Wiring Device-Kellems support grips are designed to hold the weight of electrical cables as they hang in a vertical, sloping or horizontal position. These support grips feature strand equalisers that position wires for equal loading throughout the grip length. They are CSA certified and come in an endless weave design that provides easy installation onto the cable & can be easily repositioned. These units absorb additional strain from flexure, vibration, expansion and contraction. They are available in breaking strength capacities ranging from 530 to 4900 lb.

StyleModelBreaking StrengthEye LengthMaterialStylePrice (inc. VAT)
A02202013530 Lb.7"Tin-coated bronzeSplit, Lace Closing£65.68
A02202014790 Lb.8"Tin-coated bronzeSplit, Lace Closing£78.40
A022020151020 Lb.8"Tin-coated bronzeSplit, Lace Closing£70.57
A022020171610 Lb.9"Tin-coated bronzeSplit, Lace Closing£81.57
A022020181610 Lb.10"Tin-coated bronzeSplit, Lace Closing£96.06
A022020191610 Lb.12"Tin-coated bronzeSplit, Lace Closing£98.71
A022020202150 Lb.14"Tin-coated bronzeSplit, Lace Closing£155.56
A022020213260 Lb.16"Tin-coated bronzeSplit, Lace Closing£176.35
B22020244900 lb.24"Tin Coated BronzeSingle£288.64
PASS AND SEYMOUR -

Flexcor Series Standard Duty, Closed Mesh, Single Eye Support Grips

StyleModelBale LengthCable Dia.Item
AFS075-USS--Support Grip
RFQ
BFR175-U--Support Grip
RFQ
CFC175-USS--Pulling Grip
RFQ
DFR200-USS--Support Grip
RFQ
EFR062-USS--Support Grip
RFQ
FFC062-USS--Support Grip
RFQ
BFC100-U--Support Grip
RFQ
BFR100-U--Support Grip
RFQ
CFC150-USS--Support Grip
RFQ
FFC050-U7"0.5 To 0.61"Support Grip
RFQ
GFC075-U8"0.75 To 0.99"Support Grip
RFQ
FFC062-U8"0.62 To 0.74"Support Grip
RFQ
HFS100-U9"1 To 1.24"Support Grip
RFQ
CFC125-U10"1.25 To 1.49"Support Grip
RFQ
CFC150-U12"1.5 To 1.74"Support Grip
RFQ
CFC175-U14"1.75 To 1.99"Support Grip
RFQ
IFC200-U16"2 To 2.49"Support Grip
RFQ
IFC250-U18"2.5 To 2.99"Support Grip
RFQ
IFC300-U21"3 To 3.49"Support Grip
RFQ
WOODHEAD -

130096 Series Liquid Tight Cord Grip

StyleModel
A1300960053
RFQ
B1300960046
RFQ
B1300960047
RFQ
C1300960039
RFQ
WOODHEAD -

130097 Series Cord Grip

WOODHEAD -

130094 Series Cable Support Grip

StyleModelBale LengthCable Dia.
A1300940456--
RFQ
A1300940407--
RFQ
A1300940006--
RFQ
A1300940449--
RFQ
A1300940460--
RFQ
A1300940462--
RFQ
A1300940454--
RFQ
B13009403314".5-.61"
RFQ
B13009403334".625-.75"
RFQ
C13009402544".625-.75"
RFQ
C13009402524".5-.61"
RFQ
D13009402894".5-.61"
RFQ
B13009403354".75-.99"
RFQ
E13009404114".75-.99"
RFQ
D13009402914".625-.75"
RFQ
F13009402124".625-.75"
RFQ
G13009403694".625-.75"
RFQ
G13009403714".75-.99"
RFQ
D13009402934".75-.99"
RFQ
F13009402104".5-.61"
RFQ
E13009404094".625-.75"
RFQ
C13009402564".75-.99"
RFQ
H13009404414".75-.99"
RFQ
I13009402144".75-.99"
RFQ
D13009402955"1-1.24"
RFQ
WOODHEAD -

130096 Series Cord Grip

Woodhead 130096 Series cord grips provide strain relief to cords attached on plugs, connectors, enclosures, push-button stations and pendant or hanging boxes. They feature an aluminium body equipped with a stainless-steel mesh for additional corrosion protection. These MAX-LOC grips have an O-ring that provides a tight seal to prevent the entry of dust, moisture and other contaminants.

StyleModel
A1300970177
RFQ
A1300970176
RFQ
A1300970175
RFQ
PASS AND SEYMOUR -

Flexcor Series Heavy Duty, Closed Mesh, Single Eye Support Grips

StyleModelCable Dia.
AFCHL075-U0.75 To 0.99"
RFQ
BFSHL075-U0.75 To 0.99"
RFQ
AFCHL100-U1 To 1.24"
RFQ
BFSHL100-U1 To 1.24"
RFQ
BFSHL150-U1.5 To 1.99"
RFQ
CFCHL150-U1.5 To 1.99"
RFQ
AFCHL125-U1.25 To 1.49"
RFQ
BFSHL125-U1.25 To 1.49"
RFQ
12...1718

We are here to help!

Looking for a part not listed here?