GAST Air Motors

Gast air motors are ideal for various hand-held tools, such as sanders, drills, grinders and nut runners. They offer no-load speeds up to 3000 rpm and are available in shaft diameters ranging between 3/8 and 1 inches.

Filter

Gast air motors are ideal for hand-held tools, such as sanders, drills, grinders and nut runners. The rotary vane air gear motors provide inline power to pumps or mixers requiring limited area...Read more
GAST -

Air / Gear Motors

StyleModelItemMax. TorqueLengthCFMHeightHousing MaterialHPKeywayPrice (inc. VAT)
A4AM-RV-127-GR20Air Gearmotor-11.62"576.62"Cast iron1.502.25"£1,393.40
B4AM-NRV-92Air Motor-6.56"753.96"-1.83/16" Square x 1/2" Long£290.58
C1AM-NRV-56-GR11Air Motor-------£933.76
D4AM-ARV-119Air Motor-------£642.12
E2AM-NCC-16Air Motor-------£377.17
D4AM-RV-75Air Motor-------£988.65
D6AM-NRV-7AAir Motor-------£792.18
D2AM-NCC-43AAir Motor-------£579.68
F4AM-NRV-130Air Motor-------£463.26
G6AM-FRV-23AAir Motor-------£881.12
H4AM-NRV-54AAir Motor-------£596.34
I2AM-FCC-1Air Motor-------£402.98
J6AM-NRV-251Air Motor-8.29"1306.5"Cast Iron and Aluminum4.000.19"£697.29
K2AM-NCW-7BAir Motor-------£395.05
L8AM-FRV-75Air Motor-8.48"1756.03"Cast iron5.001.34"£713.68
D8AM-NRV-32AAir Motor21 Nm------£1,145.96
J4AM-NRV-251Air Motor-6.69"726.5"Cast Iron and Aluminum1.500.19"£427.91
M2AM-NCC-96Air Motor-4.94"505.75"Cast iron0.751"£302.95
N8AM-FRV-30AAir Motor-------£1,237.63
D2AM-FCW-13Air Motor-------£426.30
O1AM-NRV-60-GR11Air Motor-------£999.52
J2AM-NRV-251Air Motor-5.87"306.5"Cast Iron and Aluminum0.750.19"£410.80
P1UP-NRV-15Air Motor-4.69"274.69"-0.500.81"£239.05
D6AM-NRV-29AAir Motor-------£950.36
D8AM-NRV-28AAir Motor-------£1,075.14
GAST -

Air Gearmotor

ModelItemPrice (inc. VAT)
1UP-GR11 SeriesAE2QWG£664.18
GAST -

Stock 12/Skid 16Am-Frv-13 Air Motor

ModelItemPrice (inc. VAT)
16AM-FRV-13CP6HQG£2,631.17
GAST -

Air Motor

ModelItemPrice (inc. VAT)
NL32-NCW-6CP6HJD£1,033.06

Frequently Asked Questions

What size air line is recommended for Gast air motors?

It is recommended that the size of the air line should be one size larger or the same size as the port.

How often should the air filter be checked for Gast rotary vane motors?

It is recommended that the filters should be cleaned, inspected and / or replaced after 500 hours of operation.

Can Gast air motors be mounted in any position?

They offer a C-face, foot or hub mounting design that allows the user to install it in these positions, depending upon the application requirement, for enhanced stability.

What type of oil should be used for lubricating Gast air motors?

A 10 wt detergent oil is suitable to lubricate Gast air motors. However, a 10w30 detergent oil can also be used as a substitute.

We are here to help!

Looking for a part not listed here?