The company's extensive catalogue includes a wide range of relief, safety, check, condensate drain and ball valves. Kingston ball valves feature a simple quarter-turn handle to control the opening / closing operation of the chrome-plated brass ball. The brand's KBV Series ball valves feature a full-port design and are compatible with air, water, oil and inert gas services. The brand also offers a pressure regulator that is designed to hold the pressure range (10 - 150 psig) regardless of flow variation and features a neoprene diaphragm that offers resistance to oil, air, moisture as well as wear & tear of internal components.
See More
Pneumatic Safety Valves(43 Products)
Pneumatic Control Valves(47 Products)
Backflow Preventer Repair Kits(74 Products)
Relief Valves(44 Products)
Pneumatic Check Valves(30 Products)
Air Oil and Water Solenoid Valves(42 Products)
Manual Air Control Valves(5 Products)
Pneumatically Operated Drain Valves(2 Products)
Valve Accessories(28 Products)
Ball Valves(10 Products)
Pneumatic Actuators(2 Products)
Timed Electric Auto Drain Valves(2 Products)
Pressure Regulators(1 Product)
Kingston Valves MPNs cross individual references to the equivalent Conrader and Parker pneumatic control and automatic drain valves. So, if you're looking for a competitor item that is either out of stock or obsolete, chances are Raptor Supplies has the equivalent Kingston Valves products available.
These Kingston Valves products range from small to large sizes. They may require careful packaging as some items might get damaged while shipping. Hence, these Kingston Valves items are delivered by courier shipment and air freight for minimum downtime.
The company's extensive catalogue includes a wide range of relief, safety, check, condensate drain and ball valves. Kingston ball valves feature a simple quarter-turn handle to control the opening / closing operation of the chrome-plated brass ball. The brand's KBV Series ball valves feature a full-port design and are compatible with air, water, oil and inert gas services. The brand also offers a pressure regulator that is designed to hold the pressure range (10 - 150 psig) regardless of flow variation and features a neoprene diaphragm that offers resistance to oil, air, moisture as well as wear & tear of internal components.
These valves are designed for installation on the discharge line of lubricated or non-lubricated air compressors to prevent backflow from the air tank. They feature a one-piece brass body for durability and a glass-filled Teflon disc for resisting chemicals. They are available in plugged, ported opt...
The KAV Series angle seat valves are used in applications including sterilisation / autoclaves, keg cleaners, pneumatic transport, rubber processing, automobile assembly, ultrasonic filtration & more. These externally piloted valves are operated with a single or double-acting piston actuator and fea...
Kingston drain valves are designed to automatically drain out condensate from compressor tanks. They feature an electric timer that eliminates the need for manual draining while improving efficiency and avoiding wasted compressed air. Selected models are supplied with a strainer to prevent debris fr...
Series 69 safety relief valves are engineered for pumping stations, tanks, hydraulics, fluid / piping lines, pole fields and gas lines where a water relief valve is required. Kingston safety valves feature a one-piece bonnet to eliminate leakage, a sealed hex cap to adjust the pressure, brass / bron...
This patented diaphragm is composed of EPDM with dual layers of chlorine and chloramine-resistant elastomer, designed to outlast the harshest of chemicals typically found in recycled water systems. This two-piece diaphragm comes with a Superior Shield assembly that helps to deflect debris to prevent diaphragm tears.
Kingston safety relief valves must be installed vertically with the drain holes opened to a convenient location for safe discharge. Installing a valve in any other position will adversely affect the performance and service life of valve components.
A soft seat safety valve utilises an elastomer, such as Silicone, FKM (Viton), EPDM (Teflon), Nitrile (Buna-N) or PTFE for sealing the internals of the valve depending on the compatibility of media flowing through it.
Always maintain a minimum operating gap of 10 percent between the system operating pressure and the safety valve's nameplate set pressure.
The drain hole is required in some models to prevent condensate from accumulating in the valve body which may freeze or corrode internal parts and prevent the valve from opening.
When high-speed water is forced to change direction or stopped abruptly, it causes a 'bounce-back', commonly known as water hammering. Such sudden stoppages of flow can increase the pressure from the shock waves and can cause significant damage to the overall piping system. This can be prevented by using spring-assisted check valves that silently move the valve into a closed position before flow reversal takes place, thus reducing the possibility of a water hammer.
