Hobart TIG welders are AC / DC welders that operate at 230 volts and use a non-consumable tungsten electrode to deliver current to the welding arc. They provide a maximum output of 165 amperes and can weld up to 3/16 inches of mild steel, stainless steel and aluminium. Hobart MIG welders are flux-cored wire welders used to perform thin-gauge steel & aluminium welding, and are widely used for arc welding. They have a built-in contactor that cools down the wire. Engine-driven welding generators by Hobart operate on gasoline and are used as auxiliary power sources while welding.
See More
MIG WeldersIncludes Handler 190, 140 and 210MVP Series MIG welders designed for applications using steel, stainless steel and aluminium materials. Can handle duty cycles up to 30 per cent (6 Products)
Welder GeneratorsChampion Series welder generators designed for DC stick welding of steel, stainless steel and cast iron surfaces. Offered in 24.75 inch and 28-inch height variants (1 Product)
MIG Welding WireCarbon steel MIG welding wires capable of providing minimal slag removal while welding on mild steel surfaces. Compatible with carbon-dioxide or argon-carbon-dioxide shielding gas (38 Products)
Welder Generator AccessoriesWelding accessory kits designed for use with Dialarc Series stick welders. Equipped with a 50 feet welding cable, electrode holder, ground clamp and lug (1 Product)
Stick Electrodes(38 Products)
PartsIncludes high-quality door gaskets designed to seal the gaps alongside the door perimeters, like the jambs and the headers, and significantly minimise the effect of sound, light, drafts, moisture, fire and smoke (28 Products)
TIG Welding Rods(11 Products)
Brazing Alloys(7 Products)
Arc Welder Accessories(4 Products)
Plasma Cutters(3 Products)
MIG Guns(2 Products)
Multiprocess Welders(1 Product)
Stick Welders(1 Product)
Welding Gloves(1 Product)
Hobart part numbers cross-reference to Lincoln Electric products. So, if you're looking for Hobart TIG welders that are either obsolete or out of stock, chances are we have the equivalent items available.
These Hobart products generally range from small to large sizes. They are suitable for both courier shipment and air freight for minimum downtime.
Hobart TIG welders are AC / DC welders that operate at 230 volts and use a non-consumable tungsten electrode to deliver current to the welding arc. They provide a maximum output of 165 amperes and can weld up to 3/16 inches of mild steel, stainless steel and aluminium. Hobart MIG welders are flux-cored wire welders used to perform thin-gauge steel & aluminium welding, and are widely used for arc welding. They have a built-in contactor that cools down the wire. Engine-driven welding generators by Hobart operate on gasoline and are used as auxiliary power sources while welding.
These raid-starting, cellulosic mild steel electrodes offer superior penetration, arc stability and wash-in. They are suitable for welding in all positions and deliver an X-ray quality weld with light slag that is comfortable to release. They feature improved weldability.
These electrodes are engineered for welding high-yield strength pipes out-of-position in harsh environments. They offer a seamless yet sturdy arc for superior penetration & fusion with exceptional control. Their excellent wetting characteristics offer freedom from internal undercutting with nearly n...
Boilermaker electrodes are manufactured for the restoration of water wall tubes in power generation installations. They produce water clear x-rays and allow comfortable slag removal, low spatter levels and smooth wash & bead tie-ins.
These tubular wires feature fast-freezing slag to offer out-of-position capability with low-hydrogen to decrease the risk of hydrogen-induced cracking. They provide exceptional impact rigidity to resist cracking in extreme applications.
They provide high deposition rates and efficiency. They have practically no slag coverage and low spatter levels, thus decreasing cleanup time. They feature seamless arc characteristics to enhance operator appeal.
Metalloy X-Cel tubular wires provide a 'soft arc' for decreased burn-through andenhanced gap bridging. The deposition rates of these wires are 30-40% higher than solid wires, making them ideal for automatic, semi-automatic and robotic welding on clean & mild steel having thicknesses less than or equal to 1/4 inches.
